summaryrefslogtreecommitdiffstats
path: root/drivers/block/ide-probe.c
diff options
context:
space:
mode:
authorRalf Baechle <ralf@linux-mips.org>1998-03-03 01:22:27 +0000
committerRalf Baechle <ralf@linux-mips.org>1998-03-03 01:22:27 +0000
commitf9bbe9da79dbc8557c74efeb158b431cd67ace52 (patch)
tree3220d014a35f9d88a48668a1468524e988daebff /drivers/block/ide-probe.c
parent3d697109c1ff85ef563aec3d5e113ef225ed2792 (diff)
Upgrade to 2.1.73.
Diffstat (limited to 'drivers/block/ide-probe.c')
-rw-r--r--drivers/block/ide-probe.c107
1 files changed, 45 insertions, 62 deletions
diff --git a/drivers/block/ide-probe.c b/drivers/block/ide-probe.c
index 9ae187b7e..8e9336037 100644
--- a/drivers/block/ide-probe.c
+++ b/drivers/block/ide-probe.c
@@ -1,7 +1,7 @@
/*
- * linux/drivers/block/ide-probe.c Version 1.02 Jul 29, 1997
+ * linux/drivers/block/ide-probe.c Version 1.03 Dec 5, 1997
*
- * Copyright (C) 1994-1996 Linus Torvalds & authors (see below)
+ * Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
*/
/*
@@ -10,36 +10,11 @@
*
* This is the IDE probe module, as evolved from hd.c and ide.c.
*
- * From hd.c:
- * |
- * | It traverses the request-list, using interrupts to jump between functions.
- * | As nearly all functions can be called within interrupts, we may not sleep.
- * | Special care is recommended. Have Fun!
- * |
- * | modified by Drew Eckhardt to check nr of hd's from the CMOS.
- * |
- * | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug
- * | in the early extended-partition checks and added DM partitions.
- * |
- * | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI).
- * |
- * | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads",
- * | and general streamlining by Mark Lord (mlord@pobox.com).
- *
- * October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by:
- *
- * Mark Lord (mlord@pobox.com) (IDE Perf.Pkg)
- * Delman Lee (delman@mipg.upenn.edu) ("Mr. atdisk2")
- * Scott Snyder (snyder@fnald0.fnal.gov) (ATAPI IDE cd-rom)
- *
- * This was a rewrite of just about everything from hd.c, though some original
- * code is still sprinkled about. Think of it as a major evolution, with
- * inspiration from lots of linux users, esp. hamish@zot.apana.org.au
- *
* Version 1.00 move drive probing code from ide.c to ide-probe.c
* Version 1.01 fix compilation problem for m68k
* Version 1.02 increase WAIT_PIDENTIFY to avoid CD-ROM locking at boot
- * by Andrea Arcangeli <arcangeli@mbox.queen.it>
+ * by Andrea Arcangeli <arcangeli@mbox.queen.it>
+ * Version 1.03 fix for (hwif->chipset == ide_4drives)
*/
#undef REALLY_SLOW_IO /* most systems can safely undef this */
@@ -51,12 +26,9 @@
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
-#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/major.h>
-#include <linux/blkdev.h>
#include <linux/errno.h>
-#include <linux/hdreg.h>
#include <linux/genhd.h>
#include <linux/malloc.h>
#include <linux/delay.h>
@@ -105,6 +77,7 @@ static inline void do_identify (ide_drive_t *drive, byte cmd)
ide_fixstring (id->fw_rev, sizeof(id->fw_rev), bswap);
ide_fixstring (id->serial_no, sizeof(id->serial_no), bswap);
+ id->model[sizeof(id->model)-1] = '\0'; /* we depend on this a lot! */
drive->present = 1;
printk("%s: %s, ", drive->name, id->model);
@@ -115,7 +88,7 @@ static inline void do_identify (ide_drive_t *drive, byte cmd)
byte type = (id->config >> 8) & 0x1f;
printk("ATAPI ");
#ifdef CONFIG_BLK_DEV_PDC4030
- if (HWIF(drive)->is_pdc4030_2) {
+ if (HWIF(drive)->channel == 1 && HWIF(drive)->chipset == ide_pdc4030) {
printk(" -- not supported on 2nd Promise port\n");
drive->present = 0;
return;
@@ -160,8 +133,8 @@ static inline void do_identify (ide_drive_t *drive, byte cmd)
*/
static void delay_50ms (void)
{
- unsigned long timer = jiffies + ((HZ + 19)/20) + 1;
- while (timer > jiffies);
+ unsigned long timeout = jiffies + ((HZ + 19)/20) + 1;
+ while (0 < (signed long)(timeout - jiffies));
}
/*
@@ -180,6 +153,7 @@ static int try_to_identify (ide_drive_t *drive, byte cmd)
ide_ioreg_t hd_status;
unsigned long timeout;
unsigned long irqs = 0;
+ byte s, a;
if (!HWIF(drive)->irq) { /* already got an IRQ? */
probe_irq_off(probe_irq_on()); /* clear dangling irqs */
@@ -188,9 +162,11 @@ static int try_to_identify (ide_drive_t *drive, byte cmd)
}
delay_50ms(); /* take a deep breath */
- if ((IN_BYTE(IDE_ALTSTATUS_REG) ^ IN_BYTE(IDE_STATUS_REG)) & ~INDEX_STAT) {
- printk("%s: probing with STATUS instead of ALTSTATUS\n", drive->name);
- hd_status = IDE_STATUS_REG; /* ancient Seagate drives */
+ a = IN_BYTE(IDE_ALTSTATUS_REG);
+ s = IN_BYTE(IDE_STATUS_REG);
+ if ((a ^ s) & ~INDEX_STAT) {
+ printk("%s: probing with STATUS(0x%02x) instead of ALTSTATUS(0x%02x)\n", drive->name, s, a);
+ hd_status = IDE_STATUS_REG; /* ancient Seagate drives, broken interfaces */
} else
hd_status = IDE_ALTSTATUS_REG; /* use non-intrusive polling */
@@ -208,7 +184,7 @@ static int try_to_identify (ide_drive_t *drive, byte cmd)
timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
timeout += jiffies;
do {
- if (jiffies > timeout) {
+ if (0 < (signed long)(jiffies - timeout)) {
if (irqs)
(void) probe_irq_off(irqs);
return 1; /* drive timed-out */
@@ -285,9 +261,11 @@ static int do_probe (ide_drive_t *drive, byte cmd)
SELECT_DRIVE(hwif,drive);
delay_50ms();
if (IN_BYTE(IDE_SELECT_REG) != drive->select.all && !drive->present) {
- OUT_BYTE(0xa0,IDE_SELECT_REG); /* exit with drive0 selected */
- delay_50ms(); /* allow BUSY_STAT to assert & clear */
- return 3; /* no i/f present: avoid killing ethernet cards */
+ if (drive->select.b.unit != 0) {
+ SELECT_DRIVE(hwif,&hwif->drives[0]); /* exit with drive0 selected */
+ delay_50ms(); /* allow BUSY_STAT to assert & clear */
+ }
+ return 3; /* no i/f present: mmm.. this should be a 4 -ml */
}
if (OK_STAT(GET_STAT(),READY_STAT,BUSY_STAT)
@@ -302,7 +280,7 @@ static int do_probe (ide_drive_t *drive, byte cmd)
rc = 3; /* not present or maybe ATAPI */
}
if (drive->select.b.unit != 0) {
- OUT_BYTE(0xa0,IDE_SELECT_REG); /* exit with drive0 selected */
+ SELECT_DRIVE(hwif,&hwif->drives[0]); /* exit with drive0 selected */
delay_50ms();
(void) GET_STAT(); /* ensure drive irq is clear */
}
@@ -367,7 +345,7 @@ static void probe_cmos_for_drives (ide_hwif_t *hwif)
int unit;
#ifdef CONFIG_BLK_DEV_PDC4030
- if (hwif->is_pdc4030_2)
+ if (hwif->chipset == ide_pdc4030 && hwif->channel != 0)
return;
#endif /* CONFIG_BLK_DEV_PDC4030 */
outb_p(0x12,0x70); /* specify CMOS address 0x12 */
@@ -400,12 +378,12 @@ static void probe_hwif (ide_hwif_t *hwif)
return;
if (hwif->io_ports[IDE_DATA_OFFSET] == HD_DATA)
probe_cmos_for_drives (hwif);
+ if ((hwif->chipset != ide_4drives || !hwif->mate->present)
#if CONFIG_BLK_DEV_PDC4030
- if (!hwif->is_pdc4030_2 &&
- (ide_check_region(hwif->io_ports[IDE_DATA_OFFSET],8) || ide_check_region(hwif->io_ports[IDE_CONTROL_OFFSET],1))) {
-#else
- if (ide_check_region(hwif->io_ports[IDE_DATA_OFFSET],8) || ide_check_region(hwif->io_ports[IDE_CONTROL_OFFSET],1)) {
+ && (hwif->chipset != ide_pdc4030 || hwif->channel == 0)
#endif /* CONFIG_BLK_DEV_PDC4030 */
+ && (ide_check_region(hwif->io_ports[IDE_DATA_OFFSET],8) || ide_check_region(hwif->io_ports[IDE_CONTROL_OFFSET],1)))
+ {
int msgout = 0;
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
@@ -431,8 +409,10 @@ static void probe_hwif (ide_hwif_t *hwif)
(void) probe_for_drive (drive);
if (drive->present && !hwif->present) {
hwif->present = 1;
- ide_request_region(hwif->io_ports[IDE_DATA_OFFSET], 8, hwif->name);
- ide_request_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1, hwif->name);
+ if (hwif->chipset != ide_4drives || !hwif->mate->present) {
+ ide_request_region(hwif->io_ports[IDE_DATA_OFFSET], 8, hwif->name);
+ ide_request_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1, hwif->name);
+ }
}
}
if (hwif->reset) {
@@ -446,7 +426,8 @@ static void probe_hwif (ide_hwif_t *hwif)
do {
delay_50ms();
stat = IN_BYTE(hwif->io_ports[IDE_STATUS_OFFSET]);
- } while ((stat & BUSY_STAT) && jiffies < timeout);
+ } while ((stat & BUSY_STAT) && 0 < (signed long)(timeout - jiffies));
+
}
restore_flags(flags);
for (unit = 0; unit < MAX_DRIVES; ++unit) {
@@ -521,13 +502,11 @@ static int init_irq (ide_hwif_t *hwif)
save_match(hwif, h, &match);
}
if (hwif->serialized) {
- ide_hwif_t *mate = &ide_hwifs[hwif->index^1];
- if (index == mate->index || h->irq == mate->irq)
+ if (hwif->mate && hwif->mate->irq == h->irq)
save_match(hwif, h, &match);
}
if (h->serialized) {
- ide_hwif_t *mate = &ide_hwifs[h->index^1];
- if (hwif->irq == mate->irq)
+ if (h->mate && hwif->irq == h->mate->irq)
save_match(hwif, h, &match);
}
}
@@ -603,7 +582,7 @@ static void init_gendisk (ide_hwif_t *hwif)
{
struct gendisk *gd, **gdp;
unsigned int unit, units, minors;
- int *bs;
+ int *bs, *max_sect;
/* figure out maximum drive number on the interface */
for (units = MAX_DRIVES; units > 0; --units) {
@@ -615,13 +594,17 @@ static void init_gendisk (ide_hwif_t *hwif)
gd->sizes = kmalloc (minors * sizeof(int), GFP_KERNEL);
gd->part = kmalloc (minors * sizeof(struct hd_struct), GFP_KERNEL);
bs = kmalloc (minors*sizeof(int), GFP_KERNEL);
+ max_sect = kmalloc (minors*sizeof(int), GFP_KERNEL);
memset(gd->part, 0, minors * sizeof(struct hd_struct));
/* cdroms and msdos f/s are examples of non-1024 blocksizes */
blksize_size[hwif->major] = bs;
- for (unit = 0; unit < minors; ++unit)
+ max_sectors[hwif->major] = max_sect;
+ for (unit = 0; unit < minors; ++unit) {
*bs++ = BLOCK_SIZE;
+ *max_sect++ = 244;
+ }
for (unit = 0; unit < units; ++unit)
hwif->drives[unit].part = &gd->part[unit << PARTN_BITS];
@@ -640,9 +623,8 @@ static void init_gendisk (ide_hwif_t *hwif)
hwif->gd = *gdp = gd; /* link onto tail of list */
}
-static int hwif_init (int h)
+static int hwif_init (ide_hwif_t *hwif)
{
- ide_hwif_t *hwif = &ide_hwifs[h];
void (*rfn)(void);
if (!hwif->present)
@@ -692,7 +674,6 @@ static int hwif_init (int h)
return hwif->present;
}
-int ideprobe_init (void);
static ide_module_t ideprobe_module = {
IDE_PROBE_MODULE,
ideprobe_init,
@@ -713,9 +694,11 @@ int ideprobe_init (void)
* Probe for drives in the usual way.. CMOS/BIOS, then poke at ports
*/
for (index = 0; index < MAX_HWIFS; ++index)
- if (probe[index]) probe_hwif (&ide_hwifs[index]);
+ if (probe[index])
+ probe_hwif(&ide_hwifs[index]);
for (index = 0; index < MAX_HWIFS; ++index)
- if (probe[index]) hwif_init (index);
+ if (probe[index])
+ hwif_init(&ide_hwifs[index]);
ide_register_module(&ideprobe_module);
MOD_DEC_USE_COUNT;
return 0;