Import of Linux/MIPS 2.1.14

1 files changed, 155 insertions, 0 deletions

diff --git a/drivers/block/umc8672.c b/drivers/block/umc8672.c
new file mode 100644
index 000000000..3427f7077
--- /dev/null
+++ b/drivers/block/umc8672.c
@@ -0,0 +1,155 @@
+/*
+ *  linux/drivers/block/umc8672.c	Version 0.05  Jul 31, 1996
+ *
+ *  Copyright (C) 1995-1996  Linus Torvalds & author (see below)
+ */
+
+/*
+ *  Principal Author/Maintainer:  PODIEN@hml2.atlas.de (Wolfram Podien)
+ *
+ *  This file provides support for the advanced features
+ *  of the UMC 8672 IDE interface.
+ *
+ *  Version 0.01	Initial version, hacked out of ide.c,
+ *			and #include'd rather than compiled separately.
+ *			This will get cleaned up in a subsequent release.
+ *
+ *  Version 0.02	now configs/compiles separate from ide.c  -ml
+ *  Version 0.03	enhanced auto-tune, fix display bug
+ *  Version 0.05	replace sti() with restore_flags()  -ml
+ *			add detection of possible race condition  -ml
+ */
+
+/*
+ * VLB Controller Support from 
+ * Wolfram Podien
+ * Rohoefe 3
+ * D28832 Achim
+ * Germany
+ *
+ * To enable UMC8672 support there must a lilo line like
+ * append="ide0=umc8672"...
+ * To set the speed according to the abilities of the hardware there must be a
+ * line like
+ * #define UMC_DRIVE0 11
+ * in the beginning of the driver, which sets the speed of drive 0 to 11 (there
+ * are some lines present). 0 - 11 are allowed speed values. These values are
+ * the results from the DOS speed test program supplied from UMC. 11 is the 
+ * highest speed (about PIO mode 3)
+ */
+#define REALLY_SLOW_IO		/* some systems can safely undef this */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <asm/io.h>
+#include "ide.h"
+#include "ide_modes.h"
+
+/*
+ * Default speeds.  These can be changed with "auto-tune" and/or hdparm.
+ */
+#define UMC_DRIVE0      1              /* DOS measured drive speeds */
+#define UMC_DRIVE1      1              /* 0 to 11 allowed */
+#define UMC_DRIVE2      1              /* 11 = Fastest Speed */
+#define UMC_DRIVE3      1              /* In case of crash reduce speed */
+
+static byte current_speeds[4] = {UMC_DRIVE0, UMC_DRIVE1, UMC_DRIVE2, UMC_DRIVE3};
+static const byte pio_to_umc [5] = {0,3,7,10,11};	/* rough guesses */
+
+/*       0    1    2    3    4    5    6    7    8    9    10   11      */
+static const byte speedtab [3][12] = {
+	{0xf, 0xb, 0x2, 0x2, 0x2, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1 },
+	{0x3, 0x2, 0x2, 0x2, 0x2, 0x2, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1 },
+	{0xff,0xcb,0xc0,0x58,0x36,0x33,0x23,0x22,0x21,0x11,0x10,0x0}};
+
+static void out_umc (char port,char wert)
+{
+	outb_p (port,0x108);
+	outb_p (wert,0x109);
+}
+
+static byte in_umc (char port)
+{
+	outb_p (port,0x108);
+	return inb_p (0x109);
+}
+
+static void umc_set_speeds (byte speeds[])
+{
+	int i, tmp;
+
+	outb_p (0x5A,0x108); /* enable umc */
+
+	out_umc (0xd7,(speedtab[0][speeds[2]] | (speedtab[0][speeds[3]]<<4)));
+	out_umc (0xd6,(speedtab[0][speeds[0]] | (speedtab[0][speeds[1]]<<4)));
+	tmp = 0;
+	for (i = 3; i >= 0; i--)
+	{
+		tmp = (tmp << 2) | speedtab[1][speeds[i]];
+	}
+	out_umc (0xdc,tmp);
+	for (i = 0;i < 4; i++)
+	{
+		out_umc (0xd0+i,speedtab[2][speeds[i]]);
+		out_umc (0xd8+i,speedtab[2][speeds[i]]);
+	}
+	outb_p (0xa5,0x108); /* disable umc */
+
+	printk ("umc8672: drive speeds [0 to 11]: %d %d %d %d\n",
+		speeds[0], speeds[1], speeds[2], speeds[3]);
+}
+
+static void tune_umc (ide_drive_t *drive, byte pio)
+{
+	unsigned long flags;
+	ide_hwgroup_t *hwgroup = ide_hwifs[HWIF(drive)->index^1].hwgroup;
+
+	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+	printk("%s: setting umc8672 to PIO mode%d (speed %d)\n", drive->name, pio, pio_to_umc[pio]);
+	save_flags(flags);
+	cli();
+	if (hwgroup && hwgroup->handler != NULL) {
+		printk("umc8672: other interface is busy: exiting tune_umc()\n");
+	} else {
+		current_speeds[drive->name[2] - 'a'] = pio_to_umc[pio];
+		umc_set_speeds (current_speeds);
+	}
+	restore_flags(flags);
+}
+
+void init_umc8672 (void)	/* called from ide.c */
+{
+	unsigned long flags;
+
+	save_flags(flags);
+	cli ();
+	if (check_region(0x108, 2)) {
+		restore_flags(flags);
+		printk("\numc8672: PORTS 0x108-0x109 ALREADY IN USE\n");
+		return;
+	}
+	outb_p (0x5A,0x108); /* enable umc */
+	if (in_umc (0xd5) != 0xa0)
+	{
+		restore_flags(flags);
+		printk ("umc8672: not found\n");
+		return;  
+	}
+	outb_p (0xa5,0x108); /* disable umc */
+
+	umc_set_speeds (current_speeds);
+	restore_flags(flags);
+
+	request_region(0x108, 2, "umc8672");
+	ide_hwifs[0].chipset = ide_umc8672;
+	ide_hwifs[1].chipset = ide_umc8672;
+	ide_hwifs[0].tuneproc = &tune_umc;
+	ide_hwifs[1].tuneproc = &tune_umc;
+
+}