Look Ma' what I found on my harddisk ...

 o New faster syscalls for 2.1.x, too
 o Upgrade to 2.1.89.

Don't try to run this.  It's flaky as hell.  But feel free to debug ...

1 files changed, 275 insertions, 0 deletions

diff --git a/drivers/fc4/soc.h b/drivers/fc4/soc.h
new file mode 100644
index 000000000..92435d3af
--- /dev/null
+++ b/drivers/fc4/soc.h
@@ -0,0 +1,275 @@
+/* soc.h: Definitions for Sparc SUNW,soc Fibre Channel Sbus driver.
+ *
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __SOC_H
+#define __SOC_H
+
+#include "fc.h"
+#include "fcp.h"
+#include "fcp_scsi.h"
+
+/* Hardware structures and constants first {{{ */
+
+struct soc_regs {
+	volatile u32 cfg;			/* Config Register */
+	volatile u32 sae;			/* Slave Access Error Register */
+	volatile u32 cmd;			/* Command & Status Register */
+	volatile u32 imask;			/* Interrupt Mask Register */
+};
+
+/* Config Register */
+#define SOC_CFG_EXT_RAM_BANK_MASK	0x07000000
+#define SOC_CFG_EEPROM_BANK_MASK	0x00030000
+#define SOC_CFG_BURST64_MASK		0x00000700
+#define SOC_CFG_SBUS_PARITY_TEST	0x00000020
+#define SOC_CFG_SBUS_PARITY_CHECK	0x00000010
+#define SOC_CFG_SBUS_ENHANCED		0x00000008
+#define SOC_CFG_BURST_MASK		0x00000007
+/* Bursts */
+#define SOC_CFG_BURST_4			0x00000000
+#define SOC_CFG_BURST_16		0x00000004
+#define SOC_CFG_BURST_32		0x00000005
+#define SOC_CFG_BURST_64		0x00000006
+
+/* Slave Access Error Register */
+#define SOC_SAE_ALIGNMENT		0x00000004
+#define SOC_SAE_UNSUPPORTED		0x00000002
+#define SOC_SAE_PARITY			0x00000001
+
+/* Command & Status Register */
+#define SOC_CMD_RSP_QALL		0x000f0000
+#define SOC_CMD_RSP_Q0			0x00010000
+#define SOC_CMD_RSP_Q1			0x00020000
+#define SOC_CMD_RSP_Q2			0x00040000
+#define SOC_CMD_RSP_Q3			0x00080000
+#define SOC_CMD_REQ_QALL		0x00000f00
+#define SOC_CMD_REQ_Q0			0x00000100
+#define SOC_CMD_REQ_Q1			0x00000200
+#define SOC_CMD_REQ_Q2			0x00000400
+#define SOC_CMD_REQ_Q3			0x00000800
+#define SOC_CMD_SAE			0x00000080
+#define SOC_CMD_INTR_PENDING		0x00000008
+#define SOC_CMD_NON_QUEUED		0x00000004
+#define SOC_CMD_IDLE			0x00000002
+#define SOC_CMD_SOFT_RESET		0x00000001
+
+/* Interrupt Mask Register */
+#define SOC_IMASK_RSP_QALL		0x000f0000
+#define SOC_IMASK_RSP_Q0		0x00010000
+#define SOC_IMASK_RSP_Q1		0x00020000
+#define SOC_IMASK_RSP_Q2		0x00040000
+#define SOC_IMASK_RSP_Q3		0x00080000
+#define SOC_IMASK_REQ_QALL		0x00000f00
+#define SOC_IMASK_REQ_Q0		0x00000100
+#define SOC_IMASK_REQ_Q1		0x00000200
+#define SOC_IMASK_REQ_Q2		0x00000400
+#define SOC_IMASK_REQ_Q3		0x00000800
+#define SOC_IMASK_SAE			0x00000080
+#define SOC_IMASK_NON_QUEUED		0x00000004
+
+#define SOC_INTR(s, cmd) \
+	(((cmd & SOC_CMD_RSP_QALL) | ((~cmd) & SOC_CMD_REQ_QALL)) \
+	 & s->imask)
+	 
+#define SOC_SETIMASK(s, i) \
+	(s)->imask = (i); (s)->regs->imask = (i)
+
+/* XRAM
+ *
+ * This is a 64KB register area. It accepts only halfword access.
+ * That's why here are the following inline functions...
+ */
+ 
+typedef u16 *xram_p;
+
+/* Get 32bit number from XRAM */
+static inline u32 xram_get_32 (xram_p x)
+{
+	return (((u32)*x) << 16) | (x[1]);
+}
+
+/* Like the above, but when we don't care about the high 16 bits */
+static inline u32 xram_get_32low (xram_p x)
+{
+	return (u32)x[1];
+}
+
+static inline u8 xram_get_8 (xram_p x)
+{
+	if (((long)x) & 1) {
+		x = (xram_p)((long)x - 1);
+		return (u8)*x;
+	} else
+		return (u8)(*x >> 8);
+}
+
+static inline void xram_copy_from (void *p, xram_p x, int len)
+{
+	for (len >>= 2; len > 0; len--, x += 2) {
+		*((u32 *)p)++ = (((u32)(*x)) << 16) | (x[1]);
+	}
+}
+
+static inline void xram_copy_to (xram_p x, void *p, int len)
+{
+	register u32 tmp;
+	for (len >>= 2; len > 0; len--, x += 2) {
+		tmp = *((u32 *)p)++;
+		*x = tmp >> 16;
+		x[1] = tmp;
+	}
+}
+
+static inline void xram_bzero (xram_p x, int len)
+{
+	for (len >>= 1; len > 0; len--) *x++ = 0;
+}
+
+/* Circular Queue */
+
+/* These two are in sizeof(u16) units */
+#define SOC_CQ_REQ_OFFSET	0x100
+#define SOC_CQ_RSP_OFFSET	0x110
+
+typedef struct {
+	u32			address;
+	u8			in;
+	u8			out;
+	u8			last;
+	u8			seqno;
+} soc_hw_cq;
+
+#define SOC_PORT_A	0x0000	/* From/To Port A */
+#define SOC_PORT_B	0x0001	/* From/To Port A */
+#define SOC_FC_HDR	0x0002  /* Contains FC Header */
+#define SOC_NORSP	0x0004  /* Don't generate response nor interrupt */
+#define SOC_NOINT	0x0008  /* Generate response but not interrupt */
+#define SOC_XFERRDY	0x0010  /* Generate XFERRDY */
+#define SOC_IGNOREPARAM	0x0020	/* Ignore PARAM field in the FC header */
+#define SOC_COMPLETE	0x0040  /* Command completed */
+#define SOC_UNSOLICITED	0x0080	/* For request this is the packet to establish unsolicited pools, */
+				/* for rsp this is unsolicited packet */
+#define SOC_STATUS	0x0100	/* State change (on/off line) */
+
+typedef struct {
+	u32			token;
+	u16			flags;
+	u8			class;
+	u8			segcnt;
+	u32			bytecnt;
+} soc_hdr;
+
+typedef struct {
+	u32			base;
+	u32			count;
+} soc_data;
+
+#define SOC_CQTYPE_OUTBOUND	0x01
+#define SOC_CQTYPE_INBOUND	0x02
+#define SOC_CQTYPE_SIMPLE	0x03
+#define SOC_CQTYPE_IO_WRITE	0x04
+#define SOC_CQTYPE_IO_READ	0x05
+#define SOC_CQTYPE_UNSOLICITED	0x06
+#define SOC_CQTYPE_DIAG		0x07
+#define SOC_CQTYPE_OFFLINE	0x08
+#define SOC_CQTYPE_RESPONSE	0x10
+#define SOC_CQTYPE_INLINE	0x20
+
+#define SOC_CQFLAGS_CONT	0x01
+#define SOC_CQFLAGS_FULL	0x02
+#define SOC_CQFLAGS_BADHDR	0x04
+#define SOC_CQFLAGS_BADPKT	0x08
+
+typedef struct {
+	soc_hdr			shdr;
+	soc_data		data[3];
+	fc_hdr			fchdr;
+	u8			count;
+	u8			type;
+	u8			flags;
+	u8			seqno;
+} soc_req;
+
+#define SOC_OK			0
+#define SOC_P_RJT		2
+#define SOC_F_RJT		3
+#define SOC_P_BSY		4
+#define SOC_F_BSY		5
+#define SOC_ONLINE		0x10
+#define SOC_OFFLINE		0x11
+#define SOC_TIMEOUT		0x12
+#define SOC_OVERRUN		0x13
+#define SOC_UNKOWN_CQ_TYPE	0x20
+#define SOC_BAD_SEG_CNT		0x21
+#define SOC_MAX_XCHG_EXCEEDED	0x22
+#define SOC_BAD_XID		0x23
+#define SOC_XCHG_BUSY		0x24
+#define SOC_BAD_POOL_ID		0x25
+#define SOC_INSUFFICIENT_CQES	0x26
+#define SOC_ALLOC_FAIL		0x27
+#define SOC_BAD_SID		0x28
+#define SOC_NO_SEG_INIT		0x29
+
+typedef struct {
+	soc_hdr			shdr;
+	u32			status;
+	soc_data		data;
+	u8			xxx1[12];
+	fc_hdr			fchdr;
+	u8			count;
+	u8			type;
+	u8			flags;
+	u8			seqno;
+} soc_rsp;
+
+/* }}} */
+
+/* Now our software structures and constants we use to drive the beast {{{ */
+
+#define SOC_CQ_REQ0_SIZE	4
+#define SOC_CQ_REQ1_SIZE	64
+#define SOC_CQ_RSP0_SIZE	8
+#define SOC_CQ_RSP1_SIZE	4
+
+#define SOC_SOLICITED_RSP_Q	0
+#define SOC_UNSOLICITED_RSP_Q	1
+
+struct soc;
+
+typedef struct {
+	/* This must come first */
+	fc_channel		fc;
+	struct soc		*s;
+	u16			flags;
+	u16			mask;
+} soc_port; 
+
+typedef struct {
+	soc_hw_cq		*hw_cq;	/* Related XRAM cq */
+	soc_req			*pool;
+	u8			in;
+	u8			out;
+	u8			last;
+	u8			seqno;
+} soc_cq;
+
+struct soc {
+	soc_port		port[2]; /* Every SOC has one or two FC ports */
+	soc_cq			req[2]; /* Request CQs */
+	soc_cq			rsp[2]; /* Response CQs */
+	int			soc_no;
+	struct soc_regs		*regs;
+	xram_p			xram;
+	fc_wwn			wwn;
+	u32			imask;	/* Our copy of regs->imask */
+	u32			cfg;	/* Our copy of regs->cfg */
+	char			serv_params[80];
+	struct soc		*next;
+	int			curr_port; /* Which port will have priority to fcp_queue_empty */
+};
+
+/* }}} */
+
+#endif /* !(__SOC_H) */