Serial driver for TX3912 builtin UART.

5 files changed, 1193 insertions, 1 deletions

diff --git a/drivers/char/Config.in b/drivers/char/Config.in
index fbce24791..2bb1d4318 100644
--- a/drivers/char/Config.in
+++ b/drivers/char/Config.in
@@ -59,6 +59,8 @@ if [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then
      tristate '    Stallion EasyIO or EC8/32 support' CONFIG_STALLION
      tristate '    Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION
    fi
+   bool '  TMPTX3912/PR31700 serial port support' CONFIG_SERIAL_TX3912
+   dep_bool '     Console on TMPTX3912/PR31700 serial port' CONFIG_SERIAL_TX3912_CONSOLE $CONFIG_SERIAL_TX3912
 fi
 if [ "$CONFIG_IT8712" = "y" ]; then
    bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 20d718501..db50f23f0 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -88,7 +88,6 @@ ifeq ($(CONFIG_BAGET_MIPS),y)
 endif
 
 ifeq ($(CONFIG_NINO),y)
-  KEYBD    =
   SERIAL   =
 endif
 
@@ -138,6 +137,7 @@ obj-$(CONFIG_SERIAL167) += serial167.o
 obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o
 obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o
 obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
+obj-$(CONFIG_SERIAL_TX3912) += generic_serial.o serial_tx3912.o
 
 subdir-$(CONFIG_RIO) += rio
 subdir-$(CONFIG_INPUT) += joystick
@@ -218,6 +218,7 @@ consolemap_deftbl.o: consolemap_deftbl.c $(TOPDIR)/include/linux/types.h
 
 defkeymap.c: defkeymap.map
 	loadkeys --mktable defkeymap.map > defkeymap.c
+
 ifeq ($(CONFIG_QTRONIX_KEYBOARD),y)
 qtronixmap.c: qtronixmap.map
 	loadkeys --mktable qtronixmap.map > qtronixmap.c
diff --git a/drivers/char/serial_tx3912.c b/drivers/char/serial_tx3912.c
new file mode 100644
index 000000000..dee8074ef
--- /dev/null
+++ b/drivers/char/serial_tx3912.c
@@ -0,0 +1,1089 @@
+/*
+ *  drivers/char/serial_tx3912.c
+ *
+ *  Copyright (C) 1999 Harald Koerfgen
+ *  Copyright (C) 2000 Jim Pick <jim@jimpick.com>
+ *  Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com)
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *  
+ *  Serial driver for TMPR3912/05 and PR31700 processors
+ */
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/tty.h>
+#include <linux/major.h>
+#include <linux/ptrace.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/malloc.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/delay.h>
+#include <asm/wbflush.h>
+#include <asm/tx3912.h>
+#include "serial_tx3912.h"
+
+/*
+ * Forward declarations for serial routines
+ */
+static void rs_disable_tx_interrupts (void * ptr);
+static void rs_enable_tx_interrupts (void * ptr); 
+static void rs_disable_rx_interrupts (void * ptr); 
+static void rs_enable_rx_interrupts (void * ptr); 
+static int rs_get_CD (void * ptr); 
+static void rs_shutdown_port (void * ptr); 
+static int rs_set_real_termios (void *ptr);
+static int rs_chars_in_buffer (void * ptr); 
+static void rs_hungup (void *ptr);
+static void rs_close (void *ptr);
+
+/*
+ * Used by generic serial driver to access hardware
+ */
+static struct real_driver rs_real_driver = { 
+	disable_tx_interrupts: rs_disable_tx_interrupts, 
+	enable_tx_interrupts:  rs_enable_tx_interrupts, 
+	disable_rx_interrupts: rs_disable_rx_interrupts, 
+	enable_rx_interrupts:  rs_enable_rx_interrupts, 
+	get_CD:                rs_get_CD, 
+	shutdown_port:         rs_shutdown_port,  
+	set_real_termios:      rs_set_real_termios,  
+	chars_in_buffer:       rs_chars_in_buffer, 
+	close:                 rs_close, 
+	hungup:                rs_hungup,
+}; 
+
+/*
+ * Structures and such for TTY sessions and usage counts
+ */
+static struct tty_driver rs_driver, rs_callout_driver;
+static struct tty_struct * rs_table[TX3912_UART_NPORTS] = { NULL, };
+static struct termios ** rs_termios;
+static struct termios ** rs_termios_locked;
+struct rs_port *rs_ports;
+int rs_refcount;
+int rs_initialized = 0;
+
+/*
+ * FIXME: Redefines for IO macros in 'include/asm/io.h'
+ */
+//#define inb(addr)	readb(addr)
+//#define inw(addr)	readw(addr)
+//#define inl(addr)	readl(addr)
+//#define outb(b, addr)	writeb(b, addr)
+//#define outw(b, addr)	writew(b, addr)
+//#define outl(b, addr)	writel(b, addr)
+
+/*
+ * ----------------------------------------------------------------------
+ *
+ * Here starts the interrupt handling routines.  All of the following
+ * subroutines are declared as inline and are folded into
+ * rs_interrupt().  They were separated out for readability's sake.
+ *
+ * Note: rs_interrupt() is a "fast" interrupt, which means that it
+ * runs with interrupts turned off.  People who may want to modify
+ * rs_interrupt() should try to keep the interrupt handler as fast as
+ * possible.  After you are done making modifications, it is not a bad
+ * idea to do:
+ * 
+ * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
+ *
+ * and look at the resulting assemble code in serial.s.
+ *
+ * 				- Ted Ts'o (tytso@mit.edu), 7-Mar-93
+ * -----------------------------------------------------------------------
+ */
+static inline void receive_char_pio(struct rs_port *port)
+{
+	struct tty_struct *tty = port->gs.tty;
+	unsigned char ch;
+	int counter = 2048;
+
+	/* While there are characters, get them ... */
+	while (counter>0) {
+		if (!(inl(port->base + TX3912_UART_CTRL1) & UART_RX_HOLD_FULL))
+			break;
+		ch = inb(port->base + TX3912_UART_DATA);
+		if (tty->flip.count < TTY_FLIPBUF_SIZE) {
+			*tty->flip.char_buf_ptr++ = ch;
+			*tty->flip.flag_buf_ptr++ = 0;
+			tty->flip.count++;
+		}
+		udelay(1); /* Allow things to happen - it take a while */
+		counter--;
+	}
+	if (!counter)
+		printk( "Ugh, looped in receive_char_pio!\n" );
+
+	tty_flip_buffer_push(tty);
+
+#if 0
+	/* Now handle error conditions */
+	if (*status & (INTTYPE(UART_RXOVERRUN_INT) |
+			INTTYPE(UART_FRAMEERR_INT) |
+			INTTYPE(UART_PARITYERR_INT) |
+			INTTYPE(UART_BREAK_INT))) {
+
+		/*
+		 * Now check to see if character should be
+		 * ignored, and mask off conditions which
+		 * should be ignored.
+	       	 */
+		if (*status & port->ignore_status_mask) {
+			goto ignore_char;
+		}
+		*status &= port->read_status_mask;
+		
+		if (*status & INTTYPE(UART_BREAK_INT)) {
+			rs_dprintk(TX3912_UART_DEBUG_INTERRUPTS, "handling break....");
+			*tty->flip.flag_buf_ptr = TTY_BREAK;
+		}
+		else if (*status & INTTYPE(UART_PARITYERR_INT)) {
+			*tty->flip.flag_buf_ptr = TTY_PARITY;
+		}
+		else if (*status & INTTYPE(UART_FRAMEERR_INT)) {
+			*tty->flip.flag_buf_ptr = TTY_FRAME;
+		}
+		if (*status & INTTYPE(UART_RXOVERRUN_INT)) {
+			/*
+			 * Overrun is special, since it's
+			 * reported immediately, and doesn't
+			 * affect the current character
+			 */
+			if (tty->flip.count < TTY_FLIPBUF_SIZE) {
+				tty->flip.count++;
+				tty->flip.flag_buf_ptr++;
+				tty->flip.char_buf_ptr++;
+				*tty->flip.flag_buf_ptr = TTY_OVERRUN;
+			}
+		}
+	}
+
+	tty->flip.flag_buf_ptr++;
+	tty->flip.char_buf_ptr++;
+	tty->flip.count++;
+
+ignore_char:
+	tty_flip_buffer_push(tty);
+#endif
+}
+
+static inline void transmit_char_pio(struct rs_port *port)
+{
+	/* While I'm able to transmit ... */
+	for (;;) {
+		if (!(inl(port->base + TX3912_UART_CTRL1) & UART_TX_EMPTY))
+			break;
+		else if (port->x_char) {
+			outb(port->x_char, port->base + TX3912_UART_DATA);
+			port->icount.tx++;
+			port->x_char = 0;
+		}
+		else if (port->gs.xmit_cnt <= 0 || port->gs.tty->stopped ||
+		    port->gs.tty->hw_stopped) {
+			break;
+		}
+		else {
+			outb(port->gs.xmit_buf[port->gs.xmit_tail++],
+				port->base + TX3912_UART_DATA);
+			port->icount.tx++;
+			port->gs.xmit_tail &= SERIAL_XMIT_SIZE-1;
+			if (--port->gs.xmit_cnt <= 0) {
+				break;
+			}
+		}
+		udelay(10); /* Allow things to happen - it take a while */
+	}
+
+	if (port->gs.xmit_cnt <= 0 || port->gs.tty->stopped ||
+	     port->gs.tty->hw_stopped) {
+		rs_disable_tx_interrupts(port);
+	}
+	
+        if (port->gs.xmit_cnt <= port->gs.wakeup_chars) {
+                if ((port->gs.tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+                    port->gs.tty->ldisc.write_wakeup)
+                        (port->gs.tty->ldisc.write_wakeup)(port->gs.tty);
+                rs_dprintk (TX3912_UART_DEBUG_TRANSMIT, "Waking up.... ldisc (%d)....\n",
+                            port->gs.wakeup_chars); 
+                wake_up_interruptible(&port->gs.tty->write_wait);
+       	}	
+}
+
+
+
+static inline void check_modem_status(struct rs_port *port)
+{
+        /* We don't have a carrier detect line - but just respond
+           like we had one anyways so that open() becomes unblocked */
+	wake_up_interruptible(&port->gs.open_wait);
+}
+
+int count = 0;
+
+/*
+ * This is the serial driver's interrupt routine (inlined, because
+ * there are two different versions of this, one for each serial port,
+ * differing only by the bits used in interrupt status 2 register)
+ */
+
+static inline void rs_rx_interrupt(int irq, void *dev_id,
+				  struct pt_regs * regs, int intshift)
+{
+	struct rs_port * port;
+	unsigned long int2status;
+	unsigned long flags;
+	unsigned long ints;
+
+	save_and_cli(flags);
+
+	port = (struct rs_port *)dev_id;
+	rs_dprintk (TX3912_UART_DEBUG_INTERRUPTS, "rs_interrupt (port %p, shift %d)...", port, intshift);
+
+	/* Get the interrrupts we have enabled */
+	int2status = IntStatus2 & IntEnable2;
+
+	/* Get interrupts in easy to use form */
+	ints = int2status >> intshift;
+
+	/* Clear any interrupts we might be about to handle */
+	IntClear2 = int2status & (
+		(INTTYPE(UART_RXOVERRUN_INT) |
+		 INTTYPE(UART_FRAMEERR_INT) |
+		 INTTYPE(UART_BREAK_INT) |
+		 INTTYPE(UART_PARITYERR_INT) |
+		 INTTYPE(UART_RX_INT)) << intshift);
+
+	if (!port || !port->gs.tty) {
+		restore_flags(flags);
+		return;
+	}
+
+	/* RX Receiver Holding Register Overrun */
+	if (ints & INTTYPE(UART_RXOVERRUN_INT)) {
+		rs_dprintk (TX3912_UART_DEBUG_INTERRUPTS, "overrun");
+		port->icount.overrun++;
+	}
+
+	/* RX Frame Error */
+	if (ints & INTTYPE(UART_FRAMEERR_INT)) {
+		rs_dprintk (TX3912_UART_DEBUG_INTERRUPTS, "frame error");
+		port->icount.frame++;
+	}
+
+	/* Break signal received */
+	if (ints & INTTYPE(UART_BREAK_INT)) {
+		rs_dprintk (TX3912_UART_DEBUG_INTERRUPTS, "break");
+		port->icount.brk++;
+      	}
+
+	/* RX Parity Error */
+	if (ints & INTTYPE(UART_PARITYERR_INT)) {
+		rs_dprintk (TX3912_UART_DEBUG_INTERRUPTS, "parity error");
+		port->icount.parity++;
+	}
+
+	/* Receive byte (non-DMA) */
+	if (ints & INTTYPE(UART_RX_INT)) {
+		receive_char_pio(port);
+	}
+
+	restore_flags(flags);
+
+	rs_dprintk (TX3912_UART_DEBUG_INTERRUPTS, "end.\n");
+}
+
+static inline void rs_tx_interrupt(int irq, void *dev_id,
+				  struct pt_regs * regs, int intshift)
+{
+	struct rs_port * port;
+	unsigned long int2status;
+	unsigned long flags;
+	unsigned long ints;
+
+	save_and_cli(flags);
+
+	port = (struct rs_port *)dev_id;
+	rs_dprintk (TX3912_UART_DEBUG_INTERRUPTS, "rs_interrupt (port %p, shift %d)...", port, intshift);
+
+	/* Get the interrrupts we have enabled */
+	int2status = IntStatus2 & IntEnable2;
+
+	if (!port || !port->gs.tty) {
+		restore_flags(flags);
+		return;
+	}
+
+	/* Get interrupts in easy to use form */
+	ints = int2status >> intshift;
+
+	/* Clear any interrupts we might be about to handle */
+	IntClear2 = int2status & (
+		(INTTYPE(UART_TX_INT) |
+		 INTTYPE(UART_EMPTY_INT) |
+		 INTTYPE(UART_TXOVERRUN_INT)) << intshift);
+
+	/* TX holding register empty, so transmit byte (non-DMA) */
+	if (ints & (INTTYPE(UART_TX_INT) | INTTYPE(UART_EMPTY_INT))) {
+		transmit_char_pio(port);
+	}
+
+	/* TX Transmit Holding Register Overrun (shouldn't happen) */
+	if (ints & INTTYPE(UART_TXOVERRUN_INT)) {
+		printk ( "rs: TX overrun\n");
+	}
+
+	/*
+	check_modem_status();
+	*/
+
+	restore_flags(flags);
+
+	rs_dprintk (TX3912_UART_DEBUG_INTERRUPTS, "end.\n");
+}
+
+static void rs_rx_interrupt_uarta(int irq, void *dev_id,
+					 struct pt_regs * regs)
+{
+	rs_rx_interrupt(irq, dev_id, regs, UARTA_SHIFT);
+}
+
+static void rs_tx_interrupt_uarta(int irq, void *dev_id,
+					 struct pt_regs * regs)
+{
+	rs_tx_interrupt(irq, dev_id, regs, UARTA_SHIFT);
+}
+
+/*
+ ***********************************************************************
+ *                Here are the routines that actually                  *
+ *              interface with the generic_serial driver               *
+ ***********************************************************************
+ */
+static void rs_disable_tx_interrupts (void * ptr) 
+{
+	struct rs_port *port = ptr; 
+	unsigned long flags;
+
+	save_and_cli(flags);
+        port->gs.flags &= ~GS_TX_INTEN;
+
+	IntEnable2 &= ~((INTTYPE(UART_TX_INT) |
+			INTTYPE(UART_EMPTY_INT) |
+			INTTYPE(UART_TXOVERRUN_INT)) << port->intshift);
+
+	IntClear2 = (INTTYPE(UART_TX_INT) |
+			INTTYPE(UART_EMPTY_INT) |
+			INTTYPE(UART_TXOVERRUN_INT)) << port->intshift;
+
+	restore_flags(flags);
+}
+
+static void rs_enable_tx_interrupts (void * ptr) 
+{
+	struct rs_port *port = ptr; 
+	unsigned long flags;
+
+	save_and_cli(flags);
+
+	IntClear2 = (INTTYPE(UART_TX_INT) |
+			INTTYPE(UART_EMPTY_INT) |
+			INTTYPE(UART_TXOVERRUN_INT)) << port->intshift;
+
+	IntEnable2 |= (INTTYPE(UART_TX_INT) |
+			INTTYPE(UART_EMPTY_INT) |
+			INTTYPE(UART_TXOVERRUN_INT)) << port->intshift;
+
+	/* Send a char to start TX interrupts happening */
+	transmit_char_pio(port);
+
+	restore_flags(flags);
+}
+
+static void rs_disable_rx_interrupts (void * ptr) 
+{
+	struct rs_port *port = ptr;
+	unsigned long flags;
+
+	save_and_cli(flags);
+
+	IntEnable2 &= ~((INTTYPE(UART_RX_INT) |
+			 INTTYPE(UART_RXOVERRUN_INT) |
+			 INTTYPE(UART_FRAMEERR_INT) |
+			 INTTYPE(UART_BREAK_INT) |
+			 INTTYPE(UART_PARITYERR_INT)) << port->intshift);
+
+	IntClear2 = (INTTYPE(UART_RX_INT) |
+			 INTTYPE(UART_RXOVERRUN_INT) |
+			 INTTYPE(UART_FRAMEERR_INT) |
+			 INTTYPE(UART_BREAK_INT) |
+			 INTTYPE(UART_PARITYERR_INT)) << port->intshift;
+
+	restore_flags(flags);
+}
+
+static void rs_enable_rx_interrupts (void * ptr) 
+{
+	struct rs_port *port = ptr;
+	unsigned long flags;
+
+	save_and_cli(flags);
+
+	IntEnable2 |= (INTTYPE(UART_RX_INT) |
+			 INTTYPE(UART_RXOVERRUN_INT) |
+			 INTTYPE(UART_FRAMEERR_INT) |
+			 INTTYPE(UART_BREAK_INT) |
+			 INTTYPE(UART_PARITYERR_INT)) << port->intshift;
+
+	/* Empty the input buffer - apparently this is *vital* */
+	while (inl(port->base + TX3912_UART_CTRL1) & UART_RX_HOLD_FULL) { 
+		inb(port->base + TX3912_UART_DATA);
+	}
+
+	IntClear2 = (INTTYPE(UART_RX_INT) |
+			 INTTYPE(UART_RXOVERRUN_INT) |
+			 INTTYPE(UART_FRAMEERR_INT) |
+			 INTTYPE(UART_BREAK_INT) |
+			 INTTYPE(UART_PARITYERR_INT)) << port->intshift;
+
+	restore_flags(flags);
+}
+
+
+static int rs_get_CD (void * ptr) 
+{
+	/* No Carried Detect in Hardware - just return true */
+	func_exit();
+	return (1);
+}
+
+static void rs_shutdown_port (void * ptr) 
+{
+	struct rs_port *port = ptr; 
+
+	func_enter();
+
+	port->gs.flags &= ~GS_ACTIVE;
+
+	func_exit();
+}
+
+static int rs_set_real_termios (void *ptr)
+{
+	struct rs_port *port = ptr;
+	int t;
+
+	switch (port->gs.baud) {
+		/* Save some typing work... */
+#define e(x) case x:t= TX3912_UART_CTRL2_B ## x ; break
+		e(300);e(600);e(1200);e(2400);e(4800);e(9600);
+		e(19200);e(38400);e(57600);e(76800);e(115200);e(230400);
+	case 0      :t = -1;
+		break;
+	default:
+		/* Can I return "invalid"? */
+		t = TX3912_UART_CTRL2_B9600;
+		printk (KERN_INFO "rs: unsupported baud rate: %d.\n", port->gs.baud);
+		break;
+	}
+#undef e
+	if (t >= 0) {
+		/* Jim: Set Hardware Baud rate - there is some good
+		   code in drivers/char/serial.c */
+
+	  	/* Program hardware for parity, data bits, stop bits (note: these are hardcoded to 8N1 */
+		UartA_Ctrl1 &= 0xf000000f;
+		UartA_Ctrl1 &= ~(UART_DIS_TXD | SER_SEVEN_BIT | SER_EVEN_PARITY | SER_TWO_STOP);
+
+#define CFLAG port->gs.tty->termios->c_cflag
+		if (C_PARENB(port->gs.tty)) {
+			if (!C_PARODD(port->gs.tty))
+				UartA_Ctrl1 |= SER_EVEN_PARITY;
+			else
+				UartA_Ctrl1 |= SER_ODD_PARITY;
+		}
+		if ((CFLAG & CSIZE)==CS6)
+			printk(KERN_ERR "6 bits not supported\n");
+		if ((CFLAG & CSIZE)==CS5)
+			printk(KERN_ERR "5 bits not supported\n");
+		if ((CFLAG & CSIZE)==CS7)
+			UartA_Ctrl1 |= SER_SEVEN_BIT;
+		if (C_CSTOPB(port->gs.tty))
+			UartA_Ctrl1 |= SER_TWO_STOP;
+
+		outl(t, port->base + TX3912_UART_CTRL2);
+		outl(0, port->base + TX3912_UART_DMA_CTRL1);
+		outl(0, port->base + TX3912_UART_DMA_CTRL2);
+        	UartA_Ctrl1 |= TX3912_UART_CTRL1_UARTON;
+
+        /* wait until UARTA is stable */
+        while (~UartA_Ctrl1 & TX3912_UART_CTRL1_UARTON);
+	}
+
+	func_exit ();
+        return 0;
+}
+
+static int rs_chars_in_buffer (void * ptr) 
+{
+	struct rs_port *port = ptr;
+	int scratch;
+
+	scratch = inl(port->base + TX3912_UART_CTRL1);
+
+	return ((scratch & UART_TX_EMPTY) ? 0 : 1);
+}
+
+/* ********************************************************************** *
+ *                Here are the routines that actually                     *
+ *               interface with the rest of the system                    *
+ * ********************************************************************** */
+static int rs_open  (struct tty_struct * tty, struct file * filp)
+{
+	struct rs_port *port;
+	int retval, line;
+
+	func_enter();
+
+	if (!rs_initialized) {
+		return -EIO;
+	}
+
+	line = MINOR(tty->device) - tty->driver.minor_start;
+	rs_dprintk (TX3912_UART_DEBUG_OPEN, "%d: opening line %d. tty=%p ctty=%p)\n", 
+	            (int) current->pid, line, tty, current->tty);
+
+	if ((line < 0) || (line >= TX3912_UART_NPORTS))
+		return -ENODEV;
+
+	/* Pre-initialized already */
+	port = & rs_ports[line];
+
+	rs_dprintk (TX3912_UART_DEBUG_OPEN, "port = %p\n", port);
+
+	tty->driver_data = port;
+	port->gs.tty = tty;
+	port->gs.count++;
+
+	rs_dprintk (TX3912_UART_DEBUG_OPEN, "starting port\n");
+
+	/*
+	 * Start up serial port
+	 */
+	retval = gs_init_port(&port->gs);
+	rs_dprintk (TX3912_UART_DEBUG_OPEN, "done gs_init\n");
+	if (retval) {
+		port->gs.count--;
+		return retval;
+	}
+
+	port->gs.flags |= GS_ACTIVE;
+
+	rs_dprintk (TX3912_UART_DEBUG_OPEN, "before inc_use_count (count=%d.\n", 
+	            port->gs.count);
+	if (port->gs.count == 1) {
+		MOD_INC_USE_COUNT;
+	}
+	rs_dprintk (TX3912_UART_DEBUG_OPEN, "after inc_use_count\n");
+
+	/* Jim: Initialize port hardware here */
+
+	/* Enable high-priority interrupts for UARTA */
+	IntEnable6 |= INT6_UARTARXINT; 
+	rs_enable_rx_interrupts(&rs_ports[0]); 
+
+	retval = gs_block_til_ready(&port->gs, filp);
+	rs_dprintk (TX3912_UART_DEBUG_OPEN, "Block til ready returned %d. Count=%d\n", 
+	            retval, port->gs.count);
+
+	if (retval) {
+		MOD_DEC_USE_COUNT;
+		port->gs.count--;
+		return retval;
+	}
+	/* tty->low_latency = 1; */
+
+	if ((port->gs.count == 1) && (port->gs.flags & ASYNC_SPLIT_TERMIOS)) {
+		if (tty->driver.subtype == SERIAL_TYPE_NORMAL)
+			*tty->termios = port->gs.normal_termios;
+		else 
+			*tty->termios = port->gs.callout_termios;
+		rs_set_real_termios (port);
+	}
+
+	port->gs.session = current->session;
+	port->gs.pgrp = current->pgrp;
+	func_exit();
+
+	/* Jim */
+/*	cli(); */
+
+	return 0;
+
+}
+
+
+
+static void rs_close (void *ptr)
+{
+	func_enter ();
+
+	/* Anything to do here? */
+
+	MOD_DEC_USE_COUNT;
+	func_exit ();
+}
+
+
+/* I haven't the foggiest why the decrement use count has to happen
+   here. The whole linux serial drivers stuff needs to be redesigned.
+   My guess is that this is a hack to minimize the impact of a bug
+   elsewhere. Thinking about it some more. (try it sometime) Try
+   running minicom on a serial port that is driven by a modularized
+   driver. Have the modem hangup. Then remove the driver module. Then
+   exit minicom.  I expect an "oops".  -- REW */
+static void rs_hungup (void *ptr)
+{
+	func_enter ();
+	MOD_DEC_USE_COUNT;
+	func_exit ();
+}
+
+static int rs_ioctl (struct tty_struct * tty, struct file * filp, 
+                     unsigned int cmd, unsigned long arg)
+{
+	int rc;
+	struct rs_port *port = tty->driver_data;
+	int ival;
+
+	rc = 0;
+	switch (cmd) {
+	case TIOCGSOFTCAR:
+		rc = put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0),
+		              (unsigned int *) arg);
+		break;
+	case TIOCSSOFTCAR:
+		if ((rc = verify_area(VERIFY_READ, (void *) arg,
+		                      sizeof(int))) == 0) {
+			get_user(ival, (unsigned int *) arg);
+			tty->termios->c_cflag =
+				(tty->termios->c_cflag & ~CLOCAL) |
+				(ival ? CLOCAL : 0);
+		}
+		break;
+	case TIOCGSERIAL:
+		if ((rc = verify_area(VERIFY_WRITE, (void *) arg,
+		                      sizeof(struct serial_struct))) == 0)
+			gs_getserial(&port->gs, (struct serial_struct *) arg);
+		break;
+	case TIOCSSERIAL:
+		if ((rc = verify_area(VERIFY_READ, (void *) arg,
+		                      sizeof(struct serial_struct))) == 0)
+			rc = gs_setserial(&port->gs, (struct serial_struct *) arg);
+		break;
+	default:
+		rc = -ENOIOCTLCMD;
+		break;
+	}
+
+	/* func_exit(); */
+	return rc;
+}
+
+
+/*
+ * This function is used to send a high-priority XON/XOFF character to
+ * the device
+ */
+static void rs_send_xchar(struct tty_struct * tty, char ch)
+{
+	struct rs_port *port = (struct rs_port *)tty->driver_data;
+	func_enter ();
+	
+	port->x_char = ch;
+	if (ch) {
+		/* Make sure transmit interrupts are on */
+		rs_enable_tx_interrupts(tty);
+	}
+
+	func_exit();
+}
+
+
+/*
+ * ------------------------------------------------------------
+ * rs_throttle()
+ * 
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled.
+ * ------------------------------------------------------------
+ */
+static void rs_throttle(struct tty_struct * tty)
+{
+#ifdef TX3912_UART_DEBUG_THROTTLE
+	char	buf[64];
+	
+	printk("throttle %s: %d....\n", tty_name(tty, buf),
+	       tty->ldisc.chars_in_buffer(tty));
+#endif
+
+	func_enter ();
+	
+	if (I_IXOFF(tty))
+		rs_send_xchar(tty, STOP_CHAR(tty));
+
+	func_exit ();
+}
+
+static void rs_unthrottle(struct tty_struct * tty)
+{
+	struct rs_port *port = (struct rs_port *)tty->driver_data;
+#ifdef TX3912_UART_DEBUG_THROTTLE
+	char	buf[64];
+	
+	printk("unthrottle %s: %d....\n", tty_name(tty, buf),
+	       tty->ldisc.chars_in_buffer(tty));
+#endif
+
+	func_enter();
+	
+	if (I_IXOFF(tty)) {
+		if (port->x_char)
+			port->x_char = 0;
+		else
+			rs_send_xchar(tty, START_CHAR(tty));
+	}
+
+	func_exit();
+}
+
+
+
+
+
+/* ********************************************************************** *
+ *                    Here are the initialization routines.               *
+ * ********************************************************************** */
+
+void * ckmalloc (int size)
+{
+        void *p;
+
+        p = kmalloc(size, GFP_KERNEL);
+        if (p) 
+                memset(p, 0, size);
+        return p;
+}
+
+
+
+static int rs_init_portstructs(void)
+{
+	struct rs_port *port;
+	int i;
+
+	/* Debugging */
+	func_enter();
+
+	rs_ports          = ckmalloc(TX3912_UART_NPORTS * sizeof (struct rs_port));
+	if (!rs_ports)
+		return -ENOMEM;
+
+	rs_termios        = ckmalloc(TX3912_UART_NPORTS * sizeof (struct termios *));
+	if (!rs_termios) {
+		kfree (rs_ports);
+		return -ENOMEM;
+	}
+
+	rs_termios_locked = ckmalloc(TX3912_UART_NPORTS * sizeof (struct termios *));
+	if (!rs_termios_locked) {
+		kfree (rs_ports);
+		kfree (rs_termios);
+		return -ENOMEM;
+	}
+
+	/* Adjust the values in the "driver" */
+	rs_driver.termios = rs_termios;
+	rs_driver.termios_locked = rs_termios_locked;
+
+	port = rs_ports;
+	for (i=0; i < TX3912_UART_NPORTS;i++) {
+		rs_dprintk (TX3912_UART_DEBUG_INIT, "initing port %d\n", i);
+		port->gs.callout_termios = tty_std_termios;
+		port->gs.normal_termios	= tty_std_termios;
+		port->gs.magic = SERIAL_MAGIC;
+		port->gs.close_delay = HZ/2;
+		port->gs.closing_wait = 30 * HZ;
+		port->gs.rd = &rs_real_driver;
+#ifdef NEW_WRITE_LOCKING
+		port->gs.port_write_sem = MUTEX;
+#endif
+#ifdef DECLARE_WAITQUEUE
+		init_waitqueue_head(&port->gs.open_wait);
+		init_waitqueue_head(&port->gs.close_wait);
+#endif
+		port->base = (i == 0) ? TX3912_UARTA_BASE : TX3912_UARTB_BASE;
+		port->intshift = (i == 0) ? UARTA_SHIFT : UARTB_SHIFT;
+		rs_dprintk (TX3912_UART_DEBUG_INIT, "base 0x%08lx intshift %d\n",
+			    port->base, port->intshift);
+		port++;
+	}
+
+	func_exit();
+	return 0;
+}
+
+static int rs_init_drivers(void)
+{
+	int error;
+
+	func_enter();
+
+	memset(&rs_driver, 0, sizeof(rs_driver));
+	rs_driver.magic = TTY_DRIVER_MAGIC;
+	rs_driver.driver_name = "serial";
+	rs_driver.name = "ttyS";
+	rs_driver.major = TTY_MAJOR;
+	rs_driver.minor_start = 64;
+	rs_driver.num = TX3912_UART_NPORTS;
+	rs_driver.type = TTY_DRIVER_TYPE_SERIAL;
+	rs_driver.subtype = SERIAL_TYPE_NORMAL;
+	rs_driver.init_termios = tty_std_termios;
+	rs_driver.init_termios.c_cflag =
+		B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+	rs_driver.refcount = &rs_refcount;
+	rs_driver.table = rs_table;
+	rs_driver.termios = rs_termios;
+	rs_driver.termios_locked = rs_termios_locked;
+
+	rs_driver.open	= rs_open;
+	rs_driver.close = gs_close;
+	rs_driver.write = gs_write;
+	rs_driver.put_char = gs_put_char; 
+	rs_driver.flush_chars = gs_flush_chars;
+	rs_driver.write_room = gs_write_room;
+	rs_driver.chars_in_buffer = gs_chars_in_buffer;
+	rs_driver.flush_buffer = gs_flush_buffer;
+	rs_driver.ioctl = rs_ioctl;
+	rs_driver.throttle = rs_throttle;
+	rs_driver.unthrottle = rs_unthrottle;
+	rs_driver.set_termios = gs_set_termios;
+	rs_driver.stop = gs_stop;
+	rs_driver.start = gs_start;
+	rs_driver.hangup = gs_hangup;
+
+	rs_callout_driver = rs_driver;
+	rs_callout_driver.name = "cua";
+	rs_callout_driver.major = TTYAUX_MAJOR;
+	rs_callout_driver.subtype = SERIAL_TYPE_CALLOUT;
+
+	if ((error = tty_register_driver(&rs_driver))) {
+		printk(KERN_ERR "Couldn't register serial driver, error = %d\n",
+		       error);
+		return 1;
+	}
+	if ((error = tty_register_driver(&rs_callout_driver))) {
+		tty_unregister_driver(&rs_driver);
+		printk(KERN_ERR "Couldn't register callout driver, error = %d\n",
+		       error);
+		return 1;
+	}
+
+	func_exit();
+	return 0;
+}
+
+
+void __init tx3912_rs_init(void)
+{
+	int rc;
+
+
+	func_enter();
+	rs_dprintk (TX3912_UART_DEBUG_INIT, "Initing serial module... (rs_debug=%d)\n", rs_debug);
+
+	rc = rs_init_portstructs ();
+	rs_init_drivers ();
+	if (request_irq(2, rs_tx_interrupt_uarta, SA_SHIRQ | SA_INTERRUPT,
+			"serial", &rs_ports[0])) {
+		printk(KERN_ERR "rs: Cannot allocate irq for UARTA.\n");
+		rc = 0;
+	}
+	if (request_irq(3, rs_rx_interrupt_uarta, SA_SHIRQ | SA_INTERRUPT,
+			"serial", &rs_ports[0])) {
+		printk(KERN_ERR "rs: Cannot allocate irq for UARTA.\n");
+		rc = 0;
+	}
+
+	IntEnable6 |= INT6_UARTARXINT; 
+	rs_enable_rx_interrupts(&rs_ports[0]); 
+
+#ifndef CONFIG_SERIAL_TX3912_CONSOLE
+{
+	unsigned int scratch = 0;
+
+	/* Setup master clock for UART */
+	scratch = inl(TX3912_CLK_CTRL_BASE);
+	scratch &= ~TX3912_CLK_CTRL_SIBMCLKDIV_MASK;
+	scratch |= ((0x2 << TX3912_CLK_CTRL_SIBMCLKDIV_SHIFT) &
+				TX3912_CLK_CTRL_SIBMCLKDIV_MASK)
+			| TX3912_CLK_CTRL_SIBMCLKDIR
+			| TX3912_CLK_CTRL_ENSIBMCLK
+			| TX3912_CLK_CTRL_CSERSEL;
+	outl(scratch, TX3912_CLK_CTRL_BASE);
+
+	/* Configure UARTA clock */
+	scratch = inl(TX3912_CLK_CTRL_BASE);
+	scratch |= ((0x3 << TX3912_CLK_CTRL_CSERDIV_SHIFT) &
+				TX3912_CLK_CTRL_CSERDIV_MASK)
+			| TX3912_CLK_CTRL_ENCSERCLK
+			| TX3912_CLK_CTRL_ENUARTACLK;
+	outl(scratch, TX3912_CLK_CTRL_BASE);
+		
+	/* Setup UARTA for 115200,8N1 */
+	outl(0, TX3912_UARTA_BASE + TX3912_UART_CTRL1);
+	outl(TX3912_UART_CTRL2_B115200, TX3912_UARTA_BASE + TX3912_UART_CTRL2);
+	outl(0, TX3912_UARTA_BASE + TX3912_UART_DMA_CTRL1);
+	outl(0, TX3912_UARTA_BASE + TX3912_UART_DMA_CTRL2);
+
+	/* Enable UARTA */
+	outl(TX3912_UART_CTRL1_ENUART, TX3912_UARTA_BASE + TX3912_UART_CTRL1);
+	while (~inl(TX3912_UARTA_BASE + TX3912_UART_CTRL1) &
+		TX3912_UART_CTRL1_UARTON);
+}
+#endif
+
+	/* Note: I didn't do anything to enable the second UART */
+	if (rc >= 0) 
+		rs_initialized++;
+
+	func_exit();
+}
+
+/*
+ * Begin serial console routines
+ */
+#ifdef CONFIG_SERIAL_TX3912_CONSOLE
+
+void serial_outc(unsigned char c)
+{
+	int i;
+	unsigned long int2;
+	#define BUSY_WAIT 10000
+
+	/*
+	 * Turn UARTA interrupts off
+	 */
+	int2 = IntEnable2;
+	IntEnable2 &=
+		~(INT2_UARTATXINT | INT2_UARTATXOVERRUN | INT2_UARTAEMPTY);
+
+	/*
+	 * The UART_TX_EMPTY bit in UartA_Ctrl1 seems
+	 * not to be very reliable :-(
+	 *
+	 * Wait for the Tx register to become empty
+	 */
+	for (i = 0; !(IntStatus2 & INT2_UARTATXINT) && (i < BUSY_WAIT); i++);
+
+	IntClear2 = INT2_UARTATXINT | INT2_UARTATXOVERRUN | INT2_UARTAEMPTY;
+	UartA_Data = c;
+	for (i = 0; !(IntStatus2 & INT2_UARTATXINT) && (i < BUSY_WAIT); i++);
+	IntClear2 = INT2_UARTATXINT | INT2_UARTATXOVERRUN | INT2_UARTAEMPTY;
+
+	IntEnable2 = int2;
+}
+
+static int serial_console_wait_key(struct console *co)
+{
+	unsigned int int2, res;
+
+	int2 = IntEnable2;
+	IntEnable2 = 0;
+
+	while (!(UartA_Ctrl1 & UART_RX_HOLD_FULL));
+	res = UartA_Data;
+	udelay(10);
+	
+	IntEnable2 = int2;
+	return res;
+}
+
+static void serial_console_write(struct console *co, const char *s,
+		unsigned count)
+{
+    	unsigned int i;
+
+	for (i = 0; i < count; i++) {
+		if (*s == '\n')
+			serial_outc('\r');
+		serial_outc(*s++);
+    	}
+}
+
+static kdev_t serial_console_device(struct console *c)
+{
+	return MKDEV(TTY_MAJOR, 64 + c->index);
+}
+
+static __init int serial_console_setup(struct console *co, char *options)
+{
+	unsigned int scratch = 0;
+
+	/* Setup master clock for UART */
+	scratch = inl(TX3912_CLK_CTRL_BASE);
+	scratch &= ~TX3912_CLK_CTRL_SIBMCLKDIV_MASK;
+	scratch |= ((0x2 << TX3912_CLK_CTRL_SIBMCLKDIV_SHIFT) &
+				TX3912_CLK_CTRL_SIBMCLKDIV_MASK)
+			| TX3912_CLK_CTRL_SIBMCLKDIR
+			| TX3912_CLK_CTRL_ENSIBMCLK
+			| TX3912_CLK_CTRL_CSERSEL;
+	outl(scratch, TX3912_CLK_CTRL_BASE);
+
+	/* Configure UARTA clock */
+	scratch = inl(TX3912_CLK_CTRL_BASE);
+	scratch |= ((0x3 << TX3912_CLK_CTRL_CSERDIV_SHIFT) &
+				TX3912_CLK_CTRL_CSERDIV_MASK)
+			| TX3912_CLK_CTRL_ENCSERCLK
+			| TX3912_CLK_CTRL_ENUARTACLK;
+	outl(scratch, TX3912_CLK_CTRL_BASE);
+		
+	/* Setup UARTA for 115200,8N1 */
+	outl(0, TX3912_UARTA_BASE + TX3912_UART_CTRL1);
+	outl(TX3912_UART_CTRL2_B115200, TX3912_UARTA_BASE + TX3912_UART_CTRL2);
+	outl(0, TX3912_UARTA_BASE + TX3912_UART_DMA_CTRL1);
+	outl(0, TX3912_UARTA_BASE + TX3912_UART_DMA_CTRL2);
+
+	/* Enable UARTA */
+	outl(TX3912_UART_CTRL1_ENUART, TX3912_UARTA_BASE + TX3912_UART_CTRL1);
+	while (~inl(TX3912_UARTA_BASE + TX3912_UART_CTRL1) &
+		TX3912_UART_CTRL1_UARTON);
+
+	return 0;
+}
+
+static struct console sercons = {
+	name:     "ttyS",
+	write:    serial_console_write,
+	device:   serial_console_device,
+	wait_key: serial_console_wait_key,
+	setup:    serial_console_setup,
+	flags:    CON_PRINTBUFFER,
+	index:    -1
+};
+
+void __init tx3912_console_init(void)
+{
+	register_console(&sercons);
+}
+
+#endif
diff --git a/drivers/char/serial_tx3912.h b/drivers/char/serial_tx3912.h
new file mode 100644
index 000000000..8276797e1
--- /dev/null
+++ b/drivers/char/serial_tx3912.h
@@ -0,0 +1,92 @@
+/*
+ *  drivers/char/serial_tx3912.h
+ *
+ *  Copyright (C) 1999 Harald Koerfgen
+ *  Copyright (C) 2000 Jim Pick <jim@jimpick.com>
+ *  Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Serial driver for TMPR3912/05 and PR31700 processors
+ */
+#include <linux/serialP.h>
+#include <linux/generic_serial.h>
+
+/* UART Interrupt (Interrupt 2) bits (UARTA,UARTB) */
+#define UART_RX_INT         9  /* receiver holding register full  (31, 21) */
+#define UART_RXOVERRUN_INT  8  /* receiver overrun error          (30, 20) */
+#define UART_FRAMEERR_INT   7  /* receiver frame error            (29, 19) */
+#define UART_BREAK_INT      6  /* received break signal           (28, 18) */
+#define UART_PARITYERR_INT  5  /* receiver parity error           (27, 17) */
+#define UART_TX_INT         4  /* transmit holding register empty (26, 16) */
+#define UART_TXOVERRUN_INT  3  /* transmit overrun error          (25, 15) */
+#define UART_EMPTY_INT      2  /* both trans/recv regs empty      (24, 14) */
+#define UART_DMAFULL_INT    1  /* DMA at end of buffer            (23, 13) */
+#define UART_DMAHALF_INT    0  /* DMA halfway through buffer */   (22, 12) */
+
+#define UARTA_SHIFT        22
+#define UARTB_SHIFT        12
+
+#define INTTYPE(interrupttype)            (1 << interrupttype)
+
+/* 
+ * This driver can spew a whole lot of debugging output at you. If you
+ * need maximum performance, you should disable the DEBUG define.
+ */
+#undef TX3912_UART_DEBUG
+
+#ifdef TX3912_UART_DEBUG
+#define TX3912_UART_DEBUG_OPEN		0x00000001
+#define TX3912_UART_DEBUG_SETTING	0x00000002
+#define TX3912_UART_DEBUG_FLOW		0x00000004
+#define TX3912_UART_DEBUG_MODEMSIGNALS	0x00000008
+#define TX3912_UART_DEBUG_TERMIOS	0x00000010
+#define TX3912_UART_DEBUG_TRANSMIT	0x00000020
+#define TX3912_UART_DEBUG_RECEIVE	0x00000040
+#define TX3912_UART_DEBUG_INTERRUPTS	0x00000080
+#define TX3912_UART_DEBUG_PROBE		0x00000100
+#define TX3912_UART_DEBUG_INIT		0x00000200
+#define TX3912_UART_DEBUG_CLEANUP	0x00000400
+#define TX3912_UART_DEBUG_CLOSE		0x00000800
+#define TX3912_UART_DEBUG_FIRMWARE	0x00001000
+#define TX3912_UART_DEBUG_MEMTEST	0x00002000
+#define TX3912_UART_DEBUG_THROTTLE	0x00004000
+#define TX3912_UART_DEBUG_ALL		0xffffffff
+
+int rs_debug = TX3912_UART_DEBUG_ALL & ~TX3912_UART_DEBUG_TRANSMIT;
+
+#define rs_dprintk(f, str...) if (rs_debug & f) printk (str)
+#define func_enter() rs_dprintk (TX3912_UART_DEBUG_FLOW,	\
+				"rs: enter " __FUNCTION__ "\n")
+#define func_exit() rs_dprintk (TX3912_UART_DEBUG_FLOW,	\
+				"rs: exit " __FUNCTION__ "\n")
+
+#else
+#define rs_dprintk(f, str...)
+#define func_enter()
+#define func_exit()
+
+#endif	/* TX3912_UART_DEBUG */
+
+/*
+ * Number of serial ports
+ */
+#define TX3912_UART_NPORTS  2
+
+/*
+ * Hardware specific serial port structure
+ */
+struct rs_port { 	
+	struct gs_port		gs;		/* Must be first field! */
+
+	unsigned long		base;
+	int			intshift;	/* Register shift */
+	struct wait_queue	*shutdown_wait; 
+	int			stat_flags;
+        struct async_icount	icount;		/* Counters for 4 input IRQs */
+	int			read_status_mask;
+	int			ignore_status_mask;
+	int			x_char;		/* XON/XOFF character */
+}; 
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 9e667567a..a2c98fc2a 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -151,6 +151,8 @@ extern void rs285_console_init(void);
 extern void sa1100_rs_console_init(void);
 extern void sgi_serial_console_init(void);
 extern void sci_console_init(void);
+extern void tx3912_console_init(void);
+extern void tx3912_rs_init(void);
 
 #ifndef MIN
 #define MIN(a,b)	((a) < (b) ? (a) : (b))
@@ -2205,6 +2207,9 @@ void __init console_init(void)
 #ifdef CONFIG_SERIAL_AMBA_CONSOLE
 	ambauart_console_init();
 #endif
+#ifdef CONFIG_SERIAL_TX3912_CONSOLE
+	tx3912_console_init();
+#endif
 }
 
 static struct tty_driver dev_tty_driver, dev_syscons_driver;
@@ -2294,6 +2299,9 @@ void __init tty_init(void)
 #if defined(CONFIG_MVME162_SCC) || defined(CONFIG_BVME6000_SCC) || defined(CONFIG_MVME147_SCC)
 	vme_scc_init();
 #endif
+#ifdef CONFIG_SERIAL_TX3912
+	tx3912_rs_init();
+#endif
 #ifdef CONFIG_COMPUTONE
 	ip2_init();
 #endif