diff options
Diffstat (limited to 'Documentation/Configure.help')
| -rw-r--r-- | Documentation/Configure.help | 37 |
1 files changed, 34 insertions, 3 deletions
diff --git a/Documentation/Configure.help b/Documentation/Configure.help index bb21ec1a5..f65e265dc 100644 --- a/Documentation/Configure.help +++ b/Documentation/Configure.help @@ -1477,7 +1477,7 @@ CONFIG_MD_LINEAR If unsure, say Y. RAID-0 (striping) mode -CONFIG_MD_STRIPED +CONFIG_MD_RAID0 If you say Y here, then your multiple devices driver will be able to use the so-called raid0 mode, i.e. it will combine the hard disk partitions into one logical device in such a fashion as to fill them @@ -1496,8 +1496,17 @@ CONFIG_MD_STRIPED If unsure, say Y. +DANGEROUS! RAID-1/RAID-5 code +CONFIG_RAID15_DANGEROUS + This new RAID1/RAID5 code has been freshly merged, and has not seen + enough testing yet. While there are no known bugs in it, it might + destroy your filesystems, eat your data and start World War III. + You have been warned. + + If unsure, say N. + RAID-1 (mirroring) mode -CONFIG_MD_MIRRORING +CONFIG_MD_RAID1 A RAID-1 set consists of several disk drives which are exact copies of each other. In the event of a mirror failure, the RAID driver will continue to use the operational mirrors in the set, providing @@ -9160,7 +9169,6 @@ CONFIG_SKFP Read Documentation/networking/skfp.txt for information about the driver. - WARNING: this driver does currently not support 64 bit systems! Questions concerning this driver can be addressed to: linux@syskonnect.de @@ -15220,6 +15228,17 @@ CONFIG_ARCH_PERSONAL_SERVER If you have any questions or comments about the Compaq Personal Server, send e-mail to skiff@crl.dec.com +Include support for the LinkUp Systems L7200 SDB +CONFIG_ARCH_L7200 + Say Y here if you intend to run this kernel on a LinkUp Systems + L7200 Software Development Board which uses an ARM720T processor. + Information on this board can be obtained at: + + http://www.linkupsys.com/ + + If you have any questions or comments about the Linux kernel port + to this board, send e-mail to sjhill@cotw.com + Math emulation CONFIG_NWFPE Say Y to include the NWFPE floating point emulator in the kernel. @@ -15332,6 +15351,18 @@ CONFIG_SERIAL_21285_CONSOLE If you have enabled the serial port on the 21285 footbridge you can make it the console by answering Y to this option. +L7200 serial port support +CONFIG_SERIAL_L7200 + If you have a LinkUp Systems L7200 board you can enable its two + onboard serial ports by enabling this option. The device numbers + are major ID 4 with minor 64 and 65 respectively. + +Console on L7200 serial port +CONFIG_SERIAL_L7200_CONSOLE + If you have enabled the serial ports on the L7200 development board + you can make the first serial port the console by answering Y to + this option. + Footbridge Mode CONFIG_HOST_FOOTBRIDGE The 21285 Footbridge chip can operate in either `host mode' or |