diff options
Diffstat (limited to 'Documentation/video4linux/bttv/CARDS')
| -rw-r--r-- | Documentation/video4linux/bttv/CARDS | 114 |
1 files changed, 0 insertions, 114 deletions
diff --git a/Documentation/video4linux/bttv/CARDS b/Documentation/video4linux/bttv/CARDS deleted file mode 100644 index ff47a322a..000000000 --- a/Documentation/video4linux/bttv/CARDS +++ /dev/null @@ -1,114 +0,0 @@ -Suppported cards: - - -Bt848/Bt848a/Bt849/Bt878/Bt879 cards ------------------------------------- - -All cards with Bt848/Bt848a/Bt849/Bt878/Bt879 and normal Composite/S-VHS inputs -are supported. -Teletext and Intercast support (PAL only) via VBI samples decoding in software. - -Some cards with additional multiplexing of inputs are only partially -supported (unless specifications by the card manufacturer are given). - -All other cards only differ by additional components as tuners, sound decoders, -EEPROMs, teletext decoders ... - -Tuner and sound decoder support for Bt878/879 is not fully working yet. - - -MATRIX Vision -------------- - -MV-Delta -- Bt848A -- 4 Composite inputs, 1 S-VHS input (shared with 4th composite) -- EEPROM - -http://www.matrix-vision.de/ - -This card has no tuner but supports all 4 composite (1 shared with an -S-VHS input) of the Bt848A. -Very nice card if you only have satellite TV but several tuners connected -to the card via composite. - -Many thanks to Matrix-Vision for giving us 2 cards for free which made -Bt848a/Bt849 single crytal operation support possible!!! - - - -Miro/Pinnacle PCTV ------------------- - -- Bt848 - some (all??) come with 2 crystals for PAL/SECAM and NTSC -- PAL, SECAM or NTSC TV tuner (Philips or TEMIC) -- MSP34xx sound decoder on add on board - decoder is supported but AFAIK does not yet work - (other sound MUX setting in GPIO port needed??? somebody who fixed this???) -- 1 tuner, 1 composite and 1 S-VHS input -- tuner type is autodetected - -http://www.miro.de/ -http://www.miro.com/ - - -Many thanks for the free card which made first NTSC support possible back -in 1997! - - -Hauppauge Win/TV pci --------------------- - -There are many different versions of the Hauppauge cards with different -tuners (TV+Radio ...), teletext decoders. -Note that even cards with same model numbers have (depending on the revision) -different chips on it. - -- Bt848 (and others but always in 2 crystal operation???) - newer cards have a Bt878, I2C support for it is still experimental -- PAL, SECAM, NTSC or tuner with or without Radio support - -e.g.: - PAL: - TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners - TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3 - - NTSC: - TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners - TSA5518: no datasheet available on Philips site -- Philips SAA5246 or SAA5284 ( or no) Teletext decoder chip - with buffer RAM (e.g. Winbond W24257AS-35: 32Kx8 CMOS static RAM) - SAA5246 (I2C 0x22) is supported -- 256 bytes EEPROM: Microchip 24LC02B or Philips 8582E2Y - with configuration information - I2C address 0xa0 (24LC02B also responds to 0xa2-0xaf) -- 1 tuner, 1 composite and (depending on model) 1 S-VHS input -- 14052B: mux for selection of sound source -- sound decoder: TDA9800, MSP34xx (stereo cards) - - -AverMedia ---------- -... - - -ADS Channel Surfer ------------------- -... - - -Maxi TV Video PCI 2 card ------------------------- -... - - -Image World ConferenceTV ------------------------- -Doesn't work: - - autodetect. Use card=21 - - sound mute. Use the line-in volume of your soundcard - - radio tuner. Since the card doesn't have an antenna, it is quite - understandable ;) However, you can hear some stations if you - ``ln -s /dev/bttv0 /dev/radio'' - =20 |