summaryrefslogtreecommitdiffstats
path: root/arch/arm/kernel/hw-ebsa285.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/kernel/hw-ebsa285.c')
-rw-r--r--arch/arm/kernel/hw-ebsa285.c161
1 files changed, 0 insertions, 161 deletions
diff --git a/arch/arm/kernel/hw-ebsa285.c b/arch/arm/kernel/hw-ebsa285.c
deleted file mode 100644
index e3385696b..000000000
--- a/arch/arm/kernel/hw-ebsa285.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * arch/arm/kernel/hw-ebsa286.c
- *
- * EBSA285 hardware specific functions
- *
- * Copyright (C) 1998 Russell King, Phil Blundel
- */
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/ptrace.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/system.h>
-
-extern int setup_arm_irq(int, struct irqaction *);
-
-extern void pci_set_cmd(struct pci_dev *dev, unsigned short clear, unsigned short set);
-extern void pci_set_base_addr(struct pci_dev *dev, int idx, unsigned int addr);
-extern void pci_set_irq_line(struct pci_dev *dev, unsigned int irq);
-
-static int irqmap_ebsa[] __initdata = { 9, 8, 18, 11 };
-static int irqmap_cats[] __initdata = { 18, 8, 9, 11 };
-
-__initfunc(static int ebsa_irqval(struct pci_dev *dev))
-{
- unsigned char pin;
-
- pcibios_read_config_byte(dev->bus->number,
- dev->devfn,
- PCI_INTERRUPT_PIN,
- &pin);
-
- return irqmap_ebsa[(PCI_SLOT(dev->devfn) + pin) & 3];
-}
-
-__initfunc(static int cats_irqval(struct pci_dev *dev))
-{
- if (dev->irq >= 128)
- return 32 + (dev->irq & 0x1f);
-
- switch (dev->irq) {
- case 1:
- case 2:
- case 3:
- case 4:
- return irqmap_cats[dev->irq - 1];
- case 0:
- return 0;
- }
-
- printk("PCI: device %02x:%02x has unknown irq line %x\n",
- dev->bus->number, dev->devfn, dev->irq);
- return 0;
-}
-
-__initfunc(void pcibios_fixup_ebsa285(struct pci_dev *dev))
-{
- char cmd;
-
- /* sort out the irq mapping for this device */
- switch (machine_type) {
- case MACH_TYPE_EBSA285:
- dev->irq = ebsa_irqval(dev);
- break;
- case MACH_TYPE_CATS:
- dev->irq = cats_irqval(dev);
- break;
- }
-
- /* Turn on bus mastering - boot loader doesn't
- * - perhaps it should! - dag
- */
- pci_read_config_byte(dev, PCI_COMMAND, &cmd);
- pci_write_config_byte(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER);
-}
-
-static void irq_pci_err(int irq, void *dev_id, struct pt_regs *regs)
-{
- const char *err = "unknown";
- unsigned long cmd = *(unsigned long *)0xfe000004 & 0xffff;
- unsigned long ctrl = *(unsigned long *)0xfe00013c & 0xffffde07;
- static unsigned long next_warn[7];
- int idx = 6;
-
- switch(irq) {
- case IRQ_PCIPARITY:
- *(unsigned long *)0xfe000004 = cmd | 1 << 31;
- idx = 0;
- err = "parity";
- break;
-
- case IRQ_PCITARGETABORT:
- *(unsigned long *)0xfe000004 = cmd | 1 << 28;
- idx = 1;
- err = "target abort";
- break;
-
- case IRQ_PCIMASTERABORT:
- *(unsigned long *)0xfe000004 = cmd | 1 << 29;
- idx = 2;
- err = "master abort";
- break;
-
- case IRQ_PCIDATAPARITY:
- *(unsigned long *)0xfe000004 = cmd | 1 << 24;
- idx = 3;
- err = "data parity";
- break;
-
- case IRQ_DISCARDTIMER:
- *(unsigned long *)0xfe00013c = ctrl | 1 << 8;
- idx = 4;
- err = "discard timer";
- break;
-
- case IRQ_SERR:
- *(unsigned long *)0xfe00013c = ctrl | 1 << 3;
- idx = 5;
- err = "system";
- break;
- }
- if (time_after_eq(jiffies, next_warn[idx])) {
- next_warn[idx] = jiffies + 3 * HZ / 100;
- printk(KERN_ERR "PCI %s error detected\n", err);
- }
-}
-
-static struct irqaction irq_pci_error = {
- irq_pci_err, SA_INTERRUPT, 0, "PCI error", NULL, NULL
-};
-
-__initfunc(void pcibios_init_ebsa285(void))
-{
- setup_arm_irq(IRQ_PCIPARITY, &irq_pci_error);
- setup_arm_irq(IRQ_PCITARGETABORT, &irq_pci_error);
- setup_arm_irq(IRQ_PCIMASTERABORT, &irq_pci_error);
- setup_arm_irq(IRQ_PCIDATAPARITY, &irq_pci_error);
- setup_arm_irq(IRQ_DISCARDTIMER, &irq_pci_error);
- setup_arm_irq(IRQ_SERR, &irq_pci_error);
-
- /*
- * Map our SDRAM at a known address in PCI space, just in case
- * the firmware had other ideas. Using a nonzero base is slightly
- * bizarre but apparently necessary to avoid problems with some
- * video cards.
- *
- * We should really only do this if the central function is enabled.
- */
- *(unsigned long *)0xfe000010 = 0;
- *(unsigned long *)0xfe000018 = 0xe0000000;
- *(unsigned long *)0xfe0000f8 = 0;
- *(unsigned long *)0xfe0000fc = 0;
- *(unsigned long *)0xfe000100 = 0x01fc0000;
- *(unsigned long *)0xfe000104 = 0;
- *(unsigned long *)0xfe000108 = 0x80000000;
- *(unsigned long *)0xfe000004 = 0x17;
-}