1 files changed, 118 insertions, 0 deletions
diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c
new file mode 100644
index 000000000..4940db83c
--- /dev/null
+++ b/arch/mips/au1000/common/dbg_io.c
@@ -0,0 +1,118 @@
+
+#include <linux/config.h>
+#include <asm/io.h>
+#include <asm/au1000.h>
+
+#ifdef CONFIG_REMOTE_DEBUG
+
+/*
+ * FIXME the user should be able to select the
+ * uart to be used for debugging.
+ */
+#define	DEBUG_BASE  UART2_ADDR
+/**/
+
+/* we need uint32 uint8 */
+/* #include "types.h" */
+typedef         unsigned char uint8;
+typedef         unsigned int  uint32;
+
+#define         UART16550_BAUD_2400             2400
+#define         UART16550_BAUD_4800             4800
+#define         UART16550_BAUD_9600             9600
+#define         UART16550_BAUD_19200            19200
+#define         UART16550_BAUD_38400            38400
+#define         UART16550_BAUD_57600            57600
+#define         UART16550_BAUD_115200           115200
+
+#define         UART16550_PARITY_NONE           0
+#define         UART16550_PARITY_ODD            0x08
+#define         UART16550_PARITY_EVEN           0x18
+#define         UART16550_PARITY_MARK           0x28
+#define         UART16550_PARITY_SPACE          0x38
+
+#define         UART16550_DATA_5BIT             0x0
+#define         UART16550_DATA_6BIT             0x1
+#define         UART16550_DATA_7BIT             0x2
+#define         UART16550_DATA_8BIT             0x3
+
+#define         UART16550_STOP_1BIT             0x0
+#define         UART16550_STOP_2BIT             0x4
+
+
+#define UART_RX		0	/* Receive buffer */
+#define UART_TX		4	/* Transmit buffer */
+#define UART_IER	8	/* Interrupt Enable Register */
+#define UART_IIR	0xC	/* Interrupt ID Register */
+#define UART_FCR	0x10	/* FIFO Control Register */
+#define UART_LCR	0x14	/* Line Control Register */
+#define UART_MCR	0x18	/* Modem Control Register */
+#define UART_LSR	0x1C	/* Line Status Register */
+#define UART_MSR	0x20	/* Modem Status Register */
+#define UART_CLK	0x28	/* Baud Rat4e Clock Divider */
+#define UART_MOD_CNTRL	0x100	/* Module Control */
+
+/* memory-mapped read/write of the port */
+#define UART16550_READ(y)    (inl(DEBUG_BASE + y) & 0xff)
+#define UART16550_WRITE(y,z) (outl(z&0xff, DEBUG_BASE + y))
+
+void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+{
+
+	if (UART16550_READ(UART_MOD_CNTRL) != 0x3) {
+		UART16550_WRITE(UART_MOD_CNTRL, 3);
+	}
+	cal_r4koff();
+
+	/* disable interrupts */
+	UART16550_WRITE(UART_IER, 0);
+
+	/* set up baud rate */
+	{ 
+		uint32 divisor;
+
+		/* set divisor */
+		divisor = get_au1000_uart_baud() / baud;
+		UART16550_WRITE(UART_CLK, divisor & 0xffff);
+	}
+
+	/* set data format */
+	UART16550_WRITE(UART_LCR, data | parity | stop);
+}
+
+static int remoteDebugInitialized = 0;
+
+uint8 getDebugChar(void)
+{
+	if (!remoteDebugInitialized) {
+		remoteDebugInitialized = 1;
+		debugInit(UART16550_BAUD_115200,
+			  UART16550_DATA_8BIT,
+			  UART16550_PARITY_NONE,
+			  UART16550_STOP_1BIT);
+	}
+
+	while((UART16550_READ(UART_LSR) & 0x1) == 0);
+	return UART16550_READ(UART_RX);
+}
+
+
+int putDebugChar(uint8 byte)
+{
+	int i;
+	if (!remoteDebugInitialized) {
+		remoteDebugInitialized = 1;
+		debugInit(UART16550_BAUD_115200,
+			  UART16550_DATA_8BIT,
+			  UART16550_PARITY_NONE,
+			  UART16550_STOP_1BIT);
+	}
+
+	while ((UART16550_READ(UART_LSR)&0x40) == 0);
+	UART16550_WRITE(UART_TX, byte);
+	//for (i=0;i<0xfff;i++);
+
+	return 1;
+}
+
+#endif