1 files changed, 0 insertions, 333 deletions
diff --git a/arch/mips/main.c b/arch/mips/main.c
deleted file mode 100644
index 8cb92d5f2..000000000
--- a/arch/mips/main.c
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- * arch/mips/main.c
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *  MIPSified by Ralf Baechle
- */
-
-#include <stdarg.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/bootinfo.h>
-
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/config.h>
-#include <linux/sched.h>
-#include <linux/tty.h>
-#include <linux/head.h>
-#include <linux/unistd.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/ctype.h>
-#include <linux/delay.h>
-#include <linux/utsname.h>
-#include <linux/ioport.h>
-
-extern unsigned long * prof_buffer;
-extern unsigned long prof_len;
-extern char edata, end;
-extern char *linux_banner;
-
-/*
- * we need this inline - forking from kernel space will result
- * in NO COPY ON WRITE (!!!), until an execve is executed. This
- * is no problem, but for the stack. This is handled by not letting
- * main() use the stack at all after fork(). Thus, no function
- * calls - which means inline code for fork too, as otherwise we
- * would use the stack upon exit from 'fork()'.
- *
- * Actually only pause and fork are needed inline, so that there
- * won't be any messing with the stack from main(), but we define
- * some others too.
- */
-#define __NR__exit __NR_exit
-static inline _syscall0(int,idle)
-static inline _syscall0(int,fork)
-
-extern int console_loglevel;
-
-extern char empty_zero_page[PAGE_SIZE];
-extern void init(void);
-extern void init_IRQ(void);
-extern void init_modules(void);
-extern long console_init(long, long);
-extern long kmalloc_init(long,long);
-extern long blk_dev_init(long,long);
-extern long chr_dev_init(long,long);
-extern void floppy_init(void);
-extern void sock_init(void);
-extern long rd_init(long mem_start, int length);
-unsigned long net_dev_init(unsigned long, unsigned long);
-#if 0
-extern long bios32_init(long, long);
-#endif
-
-extern void hd_setup(char *str, int *ints);
-extern void bmouse_setup(char *str, int *ints);
-extern void eth_setup(char *str, int *ints);
-extern void xd_setup(char *str, int *ints);
-extern void mcd_setup(char *str, int *ints);
-extern void st_setup(char *str, int *ints);
-extern void st0x_setup(char *str, int *ints);
-extern void tmc8xx_setup(char *str, int *ints);
-extern void t128_setup(char *str, int *ints);
-extern void pas16_setup(char *str, int *ints);
-extern void generic_NCR5380_setup(char *str, int *intr);
-extern void aha152x_setup(char *str, int *ints);
-extern void aha1542_setup(char *str, int *ints);
-extern void aha274x_setup(char *str, int *ints);
-extern void scsi_luns_setup(char *str, int *ints);
-extern void sound_setup(char *str, int *ints);
-#ifdef CONFIG_SBPCD
-extern void sbpcd_setup(char *str, int *ints);
-#endif CONFIG_SBPCD
-#ifdef CONFIG_CDU31A
-extern void cdu31a_setup(char *str, int *ints);
-#endif CONFIG_CDU31A
-void ramdisk_setup(char *str, int *ints);
-
-#ifdef CONFIG_SYSVIPC
-extern void ipc_init(void);
-#endif
-#ifdef CONFIG_SCSI
-extern unsigned long scsi_dev_init(unsigned long, unsigned long);
-#endif
-
-/*
- * This is set up by the setup-routine at boot-time
- */
-#define PARAM	empty_zero_page
-#define EXT_MEM_K (*(unsigned short *) (PARAM+2))
-#define DRIVE_INFO (*(struct drive_info_struct *) (PARAM+0x80))
-#define MOUNT_ROOT_RDONLY (*(unsigned short *) (PARAM+0x1F2))
-#define RAMDISK_SIZE (*(unsigned short *) (PARAM+0x1F8))
-#define ORIG_ROOT_DEV (*(unsigned short *) (PARAM+0x1FC))
-#define AUX_DEVICE_INFO (*(unsigned char *) (PARAM+0x1FF))
-
-/*
- * Defaults, may be overwritten by milo
- */
-#define SCREEN_INFO {0,0,{0,0},52,3,80,4626,3,9,50}
-
-/*
- * Information passed by milo
- */
-struct bootinfo boot_info;
-struct screen_info screen_info = SCREEN_INFO;
-
-/*
- * Boot command-line arguments
- */
-extern void copy_options(char * to, char * from);
-void parse_options(char *line);
-#define MAX_INIT_ARGS 8
-#define MAX_INIT_ENVS 8
-#define COMMAND_LINE ((char *) (PARAM+2048))
-#define COMMAND_LINE_SIZE 256
-
-extern void time_init(void);
-
-static unsigned long memory_start = 0;	/* After mem_init, stores the */
-					/* amount of free user memory */
-/* static */ unsigned long memory_end = 0;
-/* static unsigned long low_memory_start = 0; */
-
-int rows, cols;
-
-struct drive_info_struct { char dummy[32]; } drive_info;
-
-unsigned char aux_device_present;
-int ramdisk_size;
-int root_mountflags;
-
-static char command_line[COMMAND_LINE_SIZE] = { 0, };
-
-struct {
-	char *str;
-	void (*setup_func)(char *, int *);
-} bootsetups[] = {
-	{ "ramdisk=", ramdisk_setup },
-#ifdef CONFIG_INET
-	{ "ether=", eth_setup },
-#endif
-#ifdef CONFIG_SCSI
-	{ "max_scsi_luns=", scsi_luns_setup },
-#endif
-#ifdef CONFIG_BLK_DEV_HD
-	{ "hd=", hd_setup },
-#endif
-#ifdef CONFIG_CHR_DEV_ST
-	{ "st=", st_setup },
-#endif
-#ifdef CONFIG_BUSMOUSE
-	{ "bmouse=", bmouse_setup },
-#endif
-#ifdef CONFIG_SCSI_SEAGATE
-	{ "st0x=", st0x_setup },
-	{ "tmc8xx=", tmc8xx_setup },
-#endif
-#ifdef CONFIG_SCSI_T128
-	{ "t128=", t128_setup },
-#endif
-#ifdef CONFIG_SCSI_PAS16
-	{ "pas16=", pas16_setup },
-#endif
-#ifdef CONFIG_SCSI_GENERIC_NCR5380
-	{ "ncr5380=", generic_NCR5380_setup },
-#endif
-#ifdef CONFIG_SCSI_AHA152X
-        { "aha152x=", aha152x_setup},
-#endif
-#ifdef CONFIG_SCSI_AHA1542
-        { "aha1542=", aha1542_setup},
-#endif
-#ifdef CONFIG_SCSI_AHA274X
-        { "aha274x=", aha274x_setup},
-#endif
-#ifdef CONFIG_BLK_DEV_XD
-	{ "xd=", xd_setup },
-#endif
-#ifdef CONFIG_MCD
-	{ "mcd=", mcd_setup },
-#endif
-#ifdef CONFIG_SOUND
-	{ "sound=", sound_setup },
-#endif
-#ifdef CONFIG_SBPCD
-	{ "sbpcd=", sbpcd_setup },
-#endif CONFIG_SBPCD
-#ifdef CONFIG_CDU31A
-	{ "cdu31a=", cdu31a_setup },
-#endif CONFIG_CDU31A
-	{ 0, 0 }
-};
-
-void ramdisk_setup(char *str, int *ints)
-{
-   if (ints[0] > 0 && ints[1] >= 0)
-      ramdisk_size = ints[1];
-}
-
-unsigned long loops_per_sec = 1;
-
-static void calibrate_delay(void)
-{
-	int ticks;
-
-	printk("Calibrating delay loop.. ");
-	while (loops_per_sec <<= 1) {
-		/* wait for "start of" clock tick */
-		ticks = jiffies;
-		while (ticks == jiffies)
-			/* nothing */;
-		/* Go .. */
-		ticks = jiffies;
-		__delay(loops_per_sec);
-		ticks = jiffies - ticks;
-		if (ticks >= HZ) {
-			/*
-			 * No assembler - should be ok
-			 */
-			loops_per_sec = (loops_per_sec * HZ) / ticks;
-			printk("ok - %lu.%02lu BogoMips\n",
-				loops_per_sec/500000,
-				(loops_per_sec/5000) % 100);
-			return;
-		}
-	}
-	printk("failed\n");
-}
-
-int parse_machine_options(char *line)
-{
-	/*
-	 * No special MIPS options yet
-	 */
-	return 0;
-}
-
-asmlinkage void start_kernel(void)
-{
-	/*
-	 * Interrupts are still disabled. Do necessary setups, then
-	 * enable them
-	 */
- 	ROOT_DEV = ORIG_ROOT_DEV;
- 	drive_info = DRIVE_INFO;
-	aux_device_present = AUX_DEVICE_INFO;
-#if 0
-	memory_end = (1<<20) + (EXT_MEM_K<<10);
-#else
-	memory_end = 0x80800000;
-#endif
-	memory_end &= PAGE_MASK;
-	ramdisk_size = RAMDISK_SIZE;
-	copy_options(command_line,COMMAND_LINE);
-
-	if (MOUNT_ROOT_RDONLY)
-		root_mountflags |= MS_RDONLY;
-	memory_start = 0x7fffffff & (unsigned long) &end;
-
-	memory_start = paging_init(memory_start,memory_end);
-	trap_init();
-	init_IRQ();
-	sched_init();
-	parse_options(command_line);
-	init_modules();
-#ifdef CONFIG_PROFILE
-	prof_buffer = (unsigned long *) memory_start;
-	prof_len = (unsigned long) &end;
-	prof_len >>= 2;
-	memory_start += prof_len * sizeof(unsigned long);
-#endif
-	memory_start = console_init(memory_start,memory_end);
-	memory_start = kmalloc_init(memory_start,memory_end);
-	memory_start = chr_dev_init(memory_start,memory_end);
-	memory_start = blk_dev_init(memory_start,memory_end);
-	sti();
-	calibrate_delay();
-#ifdef CONFIG_SCSI
-	memory_start = scsi_dev_init(memory_start,memory_end);
-#endif
-#ifdef CONFIG_INET
-	memory_start = net_dev_init(memory_start,memory_end);
-#endif
-while(1);
-	memory_start = inode_init(memory_start,memory_end);
-	memory_start = file_table_init(memory_start,memory_end);
-	memory_start = name_cache_init(memory_start,memory_end);
-	mem_init(memory_start,memory_end);
-	buffer_init();
-	time_init();
-	floppy_init();
-	sock_init();
-#ifdef CONFIG_SYSVIPC
-	ipc_init();
-#endif
-	sti();
-	
-	/*
-	 * Get CPU type
-	 * FIXME: Not implemented yet
-	 */
-
-	printk(linux_banner);
-
-	move_to_user_mode();
-	if (!fork())		/* we count on this going ok */
-		init();
-/*
- * task[0] is meant to be used as an "idle" task: it may not sleep, but
- * it might do some general things like count free pages or it could be
- * used to implement a reasonable LRU algorithm for the paging routines:
- * anything that can be useful, but shouldn't take time from the real
- * processes.
- *
- * Right now task[0] just does a infinite idle loop.
- */
-	for(;;)
-		idle();
-}