diff options
Diffstat (limited to 'drivers/block/paride/on26.c')
| -rw-r--r-- | drivers/block/paride/on26.c | 261 |
1 files changed, 261 insertions, 0 deletions
diff --git a/drivers/block/paride/on26.c b/drivers/block/paride/on26.c new file mode 100644 index 000000000..21e6e017e --- /dev/null +++ b/drivers/block/paride/on26.c @@ -0,0 +1,261 @@ +/* + on26.c (c) 1997 Grant R. Guenther <grant@torque.net> + Under the terms of the GNU public license. + + on26.c is a low-level protocol driver for the + OnSpec 90c26 parallel to IDE adapter chip. + +*/ + +#define ON26_VERSION "1.0" + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <asm/io.h> + +#include "paride.h" + +/* mode codes: 0 nybble reads, 8-bit writes + 1 8-bit reads and writes + 2 8-bit EPP mode + 3 EPP-16 + 4 EPP-32 +*/ + +#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0)) + +#define P1 w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4); +#define P2 w2(5);w2(7);w2(5);w2(4); + +/* cont = 0 - access the IDE register file + cont = 1 - access the IDE command set +*/ + +static int on26_read_regr( PIA *pi, int cont, int regr ) + +{ int a, b, r; + + r = (regr<<2) + 1 + cont; + + switch (pi->mode) { + + case 0: w0(1); P1; w0(r); P2; w0(0); P1; + w2(6); a = r1(); w2(4); + w2(6); b = r1(); w2(4); + w2(6); w2(4); w2(6); w2(4); + return j44(a,b); + + case 1: w0(1); P1; w0(r); P2; w0(0); P1; + w2(0x26); a = r0(); w2(4); w2(0x26); w2(4); + return a; + + case 2: + case 3: + case 4: w3(1); w3(1); w2(5); w4(r); w2(4); + w3(0); w3(0); w2(0x24); a = r4(); w2(4); + w2(0x24); r4(); w2(4); + return a; + + } + return -1; +} + +static void on26_write_regr( PIA *pi, int cont, int regr, int val ) + +{ int r; + + r = (regr<<2) + 1 + cont; + + switch (pi->mode) { + + case 0: + case 1: w0(1); P1; w0(r); P2; w0(0); P1; + w0(val); P2; w0(val); P2; + break; + + case 2: + case 3: + case 4: w3(1); w3(1); w2(5); w4(r); w2(4); + w3(0); w3(0); + w2(5); w4(val); w2(4); + w2(5); w4(val); w2(4); + break; + } +} + +#define CCP(x) w0(0xff);w0(0xaa);w0(0x55);w0(0);w0(0xff);\ + w0(0x87);w0(0x78);w0(x);w2(4); + +static void on26_connect ( PIA *pi ) + +{ int x; + + pi->saved_r0 = r0(); + pi->saved_r2 = r2(); + + CCP(0x20); + w2(0xcd); w2(0xcc); w0(0xff); + x = 8; if (pi->mode) x = 9; + + w0(2); P1; w0(8); P2; + w0(2); P1; w0(x); P2; +} + +static void on26_disconnect ( PIA *pi ) + +{ if (pi->mode >= 2) { w3(4); w3(4); w3(4); w3(4); } + else { w0(4); P1; w0(4); P1; } + CCP(0x30); + w2(0xcd); w2(0xcc); w0(0xff); + w0(pi->saved_r0); + w2(pi->saved_r2); +} + +static void on26_read_block( PIA *pi, char * buf, int count ) + +{ int k, a, b; + + switch (pi->mode) { + + case 0: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x18); P2; w0(0); P1; + udelay(10); + for (k=0;k<count;k++) { + w2(6); a = r1(); + w2(4); b = r1(); + buf[k] = j44(a,b); + } + w0(2); P1; w0(8); P2; + break; + + case 1: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x19); P2; w0(0); P1; + udelay(10); + for (k=0;k<count/2;k++) { + w2(0x26); buf[2*k] = r0(); + w2(0x24); buf[2*k+1] = r0(); + } + w0(2); P1; w0(9); P2; + break; + + case 2: w3(1); w3(1); w2(5); w4(1); w2(4); + w3(0); w3(0); w2(0x24); + udelay(10); + for (k=0;k<count;k++) buf[k] = r4(); + w2(4); + break; + + case 3: w3(1); w3(1); w2(5); w4(1); w2(4); + w3(0); w3(0); w2(0x24); + udelay(10); + for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w(); + w2(4); + break; + + case 4: w3(1); w3(1); w2(5); w4(1); w2(4); + w3(0); w3(0); w2(0x24); + udelay(10); + for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l(); + w2(4); + break; + + } +} + +static void on26_write_block( PIA *pi, char * buf, int count ) + +{ int k; + + switch (pi->mode) { + + case 0: + case 1: w0(1); P1; w0(1); P2; + w0(2); P1; w0(0x18+pi->mode); P2; w0(0); P1; + udelay(10); + for (k=0;k<count/2;k++) { + w2(5); w0(buf[2*k]); + w2(7); w0(buf[2*k+1]); + } + w2(5); w2(4); + w0(2); P1; w0(8+pi->mode); P2; + break; + + case 2: w3(1); w3(1); w2(5); w4(1); w2(4); + w3(0); w3(0); w2(0xc5); + udelay(10); + for (k=0;k<count;k++) w4(buf[k]); + w2(0xc4); + break; + + case 3: w3(1); w3(1); w2(5); w4(1); w2(4); + w3(0); w3(0); w2(0xc5); + udelay(10); + for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]); + w2(0xc4); + break; + + case 4: w3(1); w3(1); w2(5); w4(1); w2(4); + w3(0); w3(0); w2(0xc5); + udelay(10); + for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]); + w2(0xc4); + break; + + } + +} + +static void on26_log_adapter( PIA *pi, char * scratch, int verbose ) + +{ char *mode_string[5] = {"4-bit","8-bit","EPP-8", + "EPP-16","EPP-32"}; + + printk("%s: on26 %s, OnSpec 90c26 at 0x%x, ", + pi->device,ON26_VERSION,pi->port); + printk("mode %d (%s), delay %d\n",pi->mode, + mode_string[pi->mode],pi->delay); + +} + +static void on26_inc_use ( void ) + +{ MOD_INC_USE_COUNT; +} + +static void on26_dec_use ( void ) + +{ MOD_DEC_USE_COUNT; +} + +struct pi_protocol on26 = {"on26",0,5,2,1,1, + on26_write_regr, + on26_read_regr, + on26_write_block, + on26_read_block, + on26_connect, + on26_disconnect, + 0, + 0, + 0, + on26_log_adapter, + on26_inc_use, + on26_dec_use + }; + + +#ifdef MODULE + +int init_module(void) + +{ return pi_register( &on26 ) - 1; +} + +void cleanup_module(void) + +{ pi_unregister( &on26 ); +} + +#endif + +/* end of on26.c */ + |