diff options
Diffstat (limited to 'drivers/net/Config.in')
| -rw-r--r-- | drivers/net/Config.in | 71 |
1 files changed, 54 insertions, 17 deletions
diff --git a/drivers/net/Config.in b/drivers/net/Config.in index aefc79a30..79a89cb4b 100644 --- a/drivers/net/Config.in +++ b/drivers/net/Config.in @@ -2,6 +2,9 @@ # Network device configuration # +mainmenu_option next_comment +comment 'ARCnet devices' + tristate 'ARCnet support' CONFIG_ARCNET if [ "$CONFIG_ARCNET" != "n" ]; then bool ' Enable arc0e (ARCnet "Ether-Encap" packet format)' CONFIG_ARCNET_ETH @@ -12,6 +15,8 @@ if [ "$CONFIG_ARCNET" != "n" ]; then dep_tristate ' ARCnet COM20020 chipset driver' CONFIG_ARCNET_COM20020 $CONFIG_ARCNET fi +endmenu + tristate 'Dummy net driver support' CONFIG_DUMMY tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then @@ -22,6 +27,10 @@ fi # # Ethernet # + +mainmenu_option next_comment +comment 'Ethernet (10 or 100Mbit)' + bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET if [ "$CONFIG_NET_ETHERNET" = "y" ]; then if [ "$CONFIG_ARM" = "y" ]; then @@ -82,18 +91,15 @@ if [ "$CONFIG_NET_ETHERNET" = "y" ]; then if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate 'RealTek 8129/8139 (not 8019/8029!) support' CONFIG_RTL8139 tristate 'Packet Engines Yellowfin Gigabit-NIC support' CONFIG_YELLOWFIN - tristate 'Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support' CONFIG_ACENIC fi bool 'Other ISA cards' CONFIG_NET_ISA if [ "$CONFIG_NET_ISA" = "y" ]; then - tristate 'AT1700/1720 support' CONFIG_AT1700 + tristate 'AT1700/1720 support (EXPERIMENTAL)' CONFIG_AT1700 tristate 'Cabletron E21xx support' CONFIG_E2100 tristate 'DEPCA, DE10x, DE200, DE201, DE202, DE422 support' CONFIG_DEPCA tristate 'EtherWORKS 3 (DE203, DE204, DE205) support' CONFIG_EWRK3 tristate 'EtherExpress 16 support' CONFIG_EEXPRESS - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - tristate 'EtherExpressPro support' CONFIG_EEXPRESS_PRO - fi + tristate 'EtherExpressPro support' CONFIG_EEXPRESS_PRO tristate 'FMV-181/182/183/184 support' CONFIG_FMV18X tristate 'HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS tristate 'HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN @@ -103,7 +109,7 @@ if [ "$CONFIG_NET_ETHERNET" = "y" ]; then fi tristate 'NE2000/NE1000 support' CONFIG_NE2000 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - bool 'SEEQ8005 support (EXPERIMENTAL)' CONFIG_SEEQ8005 + tristate 'SEEQ8005 support (EXPERIMENTAL)' CONFIG_SEEQ8005 fi bool 'SK_G16 support' CONFIG_SK_G16 fi @@ -115,6 +121,7 @@ if [ "$CONFIG_NET_ETHERNET" = "y" ]; then if [ "$CONFIG_NET_EISA" = "y" ]; then tristate 'AMD PCnet32 (VLB and PCI) support' CONFIG_PCNET32 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate 'Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support' CONFIG_ACENIC tristate 'Ansel Communications EISA 3200 support (EXPERIMENTAL)' CONFIG_AC3200 fi @@ -145,6 +152,8 @@ if [ "$CONFIG_NET_ETHERNET" = "y" ]; then fi fi +endmenu + bool 'FDDI driver support' CONFIG_FDDI if [ "$CONFIG_FDDI" = "y" ]; then bool 'Digital DEFEA and DEFPA adapter support' CONFIG_DEFXX @@ -153,25 +162,20 @@ fi if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then bool 'HIPPI driver support (EXPERIMENTAL)' CONFIG_HIPPI if [ "$CONFIG_HIPPI" = "y" ]; then - bool 'CERN HIPPI PCI adapter support' CONFIG_CERN_HIPPI - bool 'Essential RoadRunner HIPPI PCI adapter support' CONFIG_ROADRUNNER + tristate 'Essential RoadRunner HIPPI PCI adapter support' CONFIG_ROADRUNNER if [ "$CONFIG_ROADRUNNER" != "n" ]; then bool ' Use large TX/RX rings' CONFIG_ROADRUNNER_LARGE_RINGS fi fi fi -tristate 'Frame relay DLCI support' CONFIG_DLCI -if [ "$CONFIG_DLCI" = "y" -o "$CONFIG_DLCI" = "m" ]; then - int ' Max open DLCI' CONFIG_DLCI_COUNT 24 - int ' Max DLCI per device' CONFIG_DLCI_MAX 8 - dep_tristate ' SDLA (Sangoma S502/S508) support' CONFIG_SDLA $CONFIG_DLCI -fi - # # AppleTalk # + if [ "$CONFIG_ATALK" != "n" ]; then + mainmenu_option next_comment + comment 'Appletalk devices' dep_tristate 'Apple/Farallon LocalTalk PC support' CONFIG_LTPC $CONFIG_ATALK dep_tristate 'COPS LocalTalk PC support' CONFIG_COPS $CONFIG_ATALK if [ "$CONFIG_COPS" != "n" ]; then @@ -183,6 +187,7 @@ if [ "$CONFIG_ATALK" != "n" ]; then bool 'IP to Appletalk-IP Encapsulation support' CONFIG_IPDDP_ENCAP bool 'Appletalk-IP to IP Decapsulation support' CONFIG_IPDDP_DECAP fi + endmenu fi if [ ! "$CONFIG_PARPORT" = "n" ]; then @@ -203,23 +208,38 @@ fi bool 'Wireless LAN (non-hamradio)' CONFIG_NET_RADIO if [ "$CONFIG_NET_RADIO" = "y" ]; then - tristate 'STRIP (Metricom starmode radio IP)' CONFIG_STRIP + dep_tristate 'STRIP (Metricom starmode radio IP)' CONFIG_STRIP $CONFIG_INET tristate 'AT&T WaveLAN & DEC RoamAbout DS support' CONFIG_WAVELAN + tristate 'Aironet Arlan 655 & IC2200 DS support' CONFIG_ARLAN + fi +mainmenu_option next_comment +comment 'Token ring devices' + bool 'Token Ring driver support' CONFIG_TR if [ "$CONFIG_TR" = "y" ]; then tristate 'IBM Tropic chipset based adaptor support' CONFIG_IBMTR # tristate 'IBM Lanstreamer PCI adaptor support' CONFIG_IBMLS + tristate 'IBM Olympic chipset PCI adapter support' CONFIG_IBMOL tristate 'SysKonnect adapter support' CONFIG_SKTR fi +endmenu + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate 'Red Creek Hardware VPN (EXPERIMENTAL)' CONFIG_RCPCI tristate 'Traffic Shaper (EXPERIMENTAL)' CONFIG_SHAPER fi + # # WAN drivers support # + +mainmenu_option next_comment +comment 'Wan interfaces' + + # There is no way to detect a comtrol sv11 - force it modular for now. # dep_tristate 'Comtrol Hostess SV-11 support' CONFIG_HOSTESS_SV11 m @@ -227,8 +247,22 @@ dep_tristate 'Comtrol Hostess SV-11 support' CONFIG_HOSTESS_SV11 m # The COSA/SRP driver has not been tested as non-modular yet. # dep_tristate 'COSA/SRP sync serial boards support' CONFIG_COSA m -tristate 'Red Creek Hardware VPN (EXPERIMENTAL)' CONFIG_RCPCI # +# There is no way to detect a Sealevel board. Force it modular +# +dep_tristate 'Sealevel Systems 4021 support' CONFIG_SEALEVEL_4021 m + +tristate 'Frame relay DLCI support' CONFIG_DLCI +if [ "$CONFIG_DLCI" != "n" ]; then + int ' Max open DLCI' CONFIG_DLCI_COUNT 24 + int ' Max DLCI per device' CONFIG_DLCI_MAX 8 + dep_tristate ' SDLA (Sangoma S502/S508) support' CONFIG_SDLA $CONFIG_DLCI +fi + +# +# Wan router core. +# + if [ "$CONFIG_WAN_ROUTER" != "n" ]; then bool 'WAN drivers' CONFIG_WAN_DRIVERS if [ "$CONFIG_WAN_DRIVERS" = "y" ]; then @@ -247,6 +281,9 @@ if [ "$CONFIG_WAN_ROUTER" != "n" ]; then fi fi fi + +endmenu + # # X.25 network drivers # |