diff options
Diffstat (limited to 'drivers/net/Config.in')
| -rw-r--r-- | drivers/net/Config.in | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/drivers/net/Config.in b/drivers/net/Config.in new file mode 100644 index 000000000..c674ca1a4 --- /dev/null +++ b/drivers/net/Config.in @@ -0,0 +1,140 @@ +# +# Network device configuration +# + +tristate 'ARCnet support' CONFIG_ARCNET +if [ "$CONFIG_ARCNET" != "n" ]; then + bool ' Enable arc0e (ARCnet "Ether-Encap" packet format)' CONFIG_ARCNET_ETH + bool ' Enable arc0s (ARCnet RFC1051 packet format)' CONFIG_ARCNET_1051 +fi +tristate 'Dummy net driver support' CONFIG_DUMMY +tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER + +# +# Ethernet +# +bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET +if [ "$CONFIG_NET_ETHERNET" = "y" ]; then + bool '3COM cards' CONFIG_NET_VENDOR_3COM + if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then + tristate '3c501 support' CONFIG_EL1 + tristate '3c503 support' CONFIG_EL2 + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate '3c505 support' CONFIG_ELPLUS + tristate '3c507 support' CONFIG_EL16 + fi + tristate '3c509/3c579 support' CONFIG_EL3 + tristate '3c590 series (592/595/597) "Vortex" support' CONFIG_VORTEX + fi + bool 'AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE + if [ "$CONFIG_LANCE" = "y" ]; then + bool 'AMD PCInet32 (VLB and PCI) support' CONFIG_LANCE32 + fi + bool 'Western Digital/SMC cards' CONFIG_NET_VENDOR_SMC + if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then + tristate 'WD80*3 support' CONFIG_WD80x3 + tristate 'SMC Ultra support' CONFIG_ULTRA + tristate 'SMC 9194 support' CONFIG_SMC9194 + fi + bool 'Other ISA cards' CONFIG_NET_ISA + if [ "$CONFIG_NET_ISA" = "y" ]; then + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate 'AT1700 support (EXPERIMENTAL)' CONFIG_AT1700 + fi + tristate 'Cabletron E21xx support' CONFIG_E2100 + tristate 'DEPCA, DE10x, DE200, DE201, DE202, DE422 support' CONFIG_DEPCA + tristate 'EtherWORKS 3 (DE203, DE204, DE205) support' CONFIG_EWRK3 + tristate 'EtherExpress 16 support' CONFIG_EEXPRESS + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate 'EtherExpressPro support' CONFIG_EEXPRESS_PRO + tristate 'FMV-181/182/183/184 support' CONFIG_FMV18X + fi + tristate 'HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS + tristate 'HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN + tristate 'HP 10/100VG PCLAN (ISA, EISA, PCI) support' CONFIG_HP100 + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate 'ICL EtherTeam 16i/32 support' CONFIG_ETH16I + fi + tristate 'NE2000/NE1000 support' CONFIG_NE2000 + tristate 'NI5210 support' CONFIG_NI52 + tristate 'NI6510 support' CONFIG_NI65 + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + bool 'SEEQ8005 support (EXPERIMENTAL)' CONFIG_SEEQ8005 + fi + bool 'SK_G16 support' CONFIG_SK_G16 + fi + bool 'EISA, VLB, PCI and on board controllers' CONFIG_NET_EISA + if [ "$CONFIG_NET_EISA" = "y" ]; then + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate 'Ansel Communications EISA 3200 support (EXPERIMENTAL)' CONFIG_AC3200 + fi + tristate 'Apricot Xen-II on board ethernet' CONFIG_APRICOT + tristate 'DE425, DE434, DE435, DE450, DE500 support' CONFIG_DE4X5 + tristate 'DECchip Tulip (dc21x4x) PCI support' CONFIG_DEC_ELCP + tristate 'Digi Intl. RightSwitch SE-X support' CONFIG_DGRS + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + bool 'Zenith Z-Note support (EXPERIMENTAL)' CONFIG_ZNET + fi + fi + bool 'Pocket and portable adaptors' CONFIG_NET_POCKET + if [ "$CONFIG_NET_POCKET" = "y" ]; then + bool 'AT-LAN-TEC/RealTek pocket adaptor support' CONFIG_ATP + tristate 'D-Link DE600 pocket adaptor support' CONFIG_DE600 + tristate 'D-Link DE620 pocket adaptor support' CONFIG_DE620 + fi +fi + +bool 'FDDI driver support' CONFIG_FDDI +if [ "$CONFIG_FDDI" = "y" ]; then + bool 'Digital DEFEA and DEFPA adapter support' CONFIG_DEFXX +fi + +if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate 'Frame relay DLCI support (EXPERIMENTAL)' CONFIG_DLCI + if [ "$CONFIG_DLCI" = "y" -o "$CONFIG_DLCI" = "m" ]; then + int ' Max open DLCI' CONFIG_DLCI_COUNT 24 + int ' Max DLCI per device' CONFIG_DLCI_MAX 8 + dep_tristate ' SDLA (Sangoma S502/S508) support' CONFIG_SDLA $CONFIG_DLCI + fi +fi + +tristate 'PLIP (parallel port) support' CONFIG_PLIP + +tristate 'PPP (point-to-point) support' CONFIG_PPP +if [ ! "$CONFIG_PPP" = "n" ]; then + comment 'CCP compressors for PPP are only built as modules.' +fi + +bool 'Radio network interfaces' CONFIG_NET_RADIO +if [ "$CONFIG_NET_RADIO" != "n" ]; then + if [ "$CONFIG_AX25" != "n" ]; then + tristate 'Serial port KISS driver for AX.25' CONFIG_MKISS + tristate 'BPQ Ethernet driver for AX.25' CONFIG_BPQETHER + tristate 'Gracilis PackeTwin driver for AX.25' CONFIG_PT + tristate 'Ottawa PI and PI2 driver for AX.25' CONFIG_PI + tristate 'Z8530 SCC driver for AX.25' CONFIG_SCC + fi + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate 'BAYCOM ser12 and par96 driver for AX.25' CONFIG_BAYCOM + tristate 'Soundcard modem driver for AX.25' CONFIG_SOUNDMODEM + fi + tristate 'STRIP (Metricom starmode radio IP)' CONFIG_STRIP + tristate 'WaveLAN support' CONFIG_WAVELAN + tristate 'WIC Radio IP bridge (EXPERIMENTAL)' CONFIG_WIC +fi + +tristate 'SLIP (serial line) support' CONFIG_SLIP +if [ "$CONFIG_SLIP" != "n" ]; then + bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED + bool ' Keepalive and linefill' CONFIG_SLIP_SMART + bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6 +fi + +bool 'Token Ring driver support' CONFIG_TR +if [ "$CONFIG_TR" = "y" ]; then + tristate 'IBM Tropic chipset based adaptor support' CONFIG_IBMTR +fi + +if [ "$CONFIG_MIPS_JAZZ" = "y" ]; then + bool 'MIPS JAZZ onboard SONIC ethernet support' CONFIG_MIPS_JAZZ_SONIC +fi |