diff options
Diffstat (limited to 'drivers/usb/ov511.h')
| -rw-r--r-- | drivers/usb/ov511.h | 53 |
1 files changed, 49 insertions, 4 deletions
diff --git a/drivers/usb/ov511.h b/drivers/usb/ov511.h index 4dc7074bb..3f41e382d 100644 --- a/drivers/usb/ov511.h +++ b/drivers/usb/ov511.h @@ -6,9 +6,9 @@ #define OV511_DEBUG /* Turn on debug messages */ #ifdef OV511_DEBUG -# define PDEBUG(fmt, args...) printk("ov511: " fmt, ## args) +# define PDEBUG(fmt, args...) printk("ov511: " fmt "\n" , ## args) #else -# define PDEBUG(fmt, args...) /* Nothing */ +# define PDEBUG(fmt, args...) do {} while(0) #endif /* Camera interface register numbers */ @@ -103,13 +103,57 @@ #define OV511_ALTERNATE_SIZE_257 6 #define OV511_ALTERNATE_SIZE_0 7 +/* ov7610 registers */ +#define OV7610_REG_GAIN 0x00 +#define OV7610_REG_BLUE 0x01 +#define OV7610_REG_RED 0x02 +#define OV7610_REG_SAT 0x03 +#define OV7610_REG_CNT 0x05 +#define OV7610_REG_BRT 0x06 +#define OV7610_REG_BLUE_BIAS 0x0C +#define OV7610_REG_RED_BIAS 0x0D +#define OV7610_REG_GAMMA_COEFF 0x0E +#define OV7610_REG_WB_RANGE 0x0F +#define OV7610_REG_EXP 0x10 +#define OV7610_REG_CLOCK 0x11 +#define OV7610_REG_COM_A 0x12 +#define OV7610_REG_COM_B 0x13 +#define OV7610_REG_COM_C 0x14 +#define OV7610_REG_COM_D 0x15 +#define OV7610_REG_FIELD_DIVIDE 0x16 +#define OV7610_REG_HWIN_START 0x17 +#define OV7610_REG_HWIN_END 0x18 +#define OV7610_REG_VWIN_START 0x19 +#define OV7610_REG_VWIN_END 0x1A +#define OV7610_REG_PIXEL_SHIFT 0x1B +#define OV7610_REG_ID_HIGH 0x1C +#define OV7610_REG_ID_LOW 0x1D +#define OV7610_REG_COM_E 0x20 +#define OV7610_REG_YOFFSET 0x21 +#define OV7610_REG_UOFFSET 0x22 +#define OV7610_REG_ECW 0x24 +#define OV7610_REG_ECB 0x25 +#define OV7610_REG_COM_F 0x26 +#define OV7610_REG_COM_G 0x27 +#define OV7610_REG_COM_H 0x28 +#define OV7610_REG_COM_I 0x29 +#define OV7610_REG_FRAMERATE_H 0x2A +#define OV7610_REG_FRAMERATE_L 0x2B +#define OV7610_REG_ALC 0x2C +#define OV7610_REG_COM_J 0x2D +#define OV7610_REG_VOFFSET 0x2E +#define OV7610_REG_YGAMMA 0x33 +#define OV7610_REG_BIAS_ADJUST 0x34 +#define OV7610_REG_COM_L 0x35 +#define OV7610_REG_COM_K 0x38 + #define STREAM_BUF_SIZE (PAGE_SIZE * 4) -#define SCRATCH_BUF_SIZE (STREAM_BUF_SIZE * 2) +#define SCRATCH_BUF_SIZE 384 #define FRAMES_PER_DESC 10 /* FIXME - What should this be? */ -#define FRAME_SIZE_PER_DESC 512 /* FIXME - Shouldn't be hardcoded */ +#define FRAME_SIZE_PER_DESC 993 /* FIXME - Shouldn't be hardcoded */ // FIXME - should this be 0x81 (endpoint address) or 0x01 (endpoint number)? #define OV511_ENDPOINT_ADDRESS 0x81 /* Address of isoc endpoint */ @@ -166,6 +210,7 @@ struct ov511_frame { int curline; /* Line of frame we're working on */ int curpix; + int segment; /* Segment from the incoming data */ long scanlength; /* uncompressed, raw data length of frame */ long bytes_read; /* amount of scanlength that has been read from *data */ |