path: root/Documentation/Changes

Intro
=====

This document is designed to provide a list of the minimum levels of
software necessary to run the 2.4 kernels, as well as provide brief
instructions regarding any other "Gotchas" users may encounter when
trying life on the Bleeding Edge.  If upgrading from a pre-2.2.x
kernel, please consult the Changes file included with 2.2.x kernels for
additional information; most of that information will not be repeated
here.  Basically, this document assumes that your system is already
functional and running at least 2.2.x kernels.

This document is originally based on my "Changes" file for 2.0.x kernels
and therefore owes credit to the same people as that file (Jared Mauch,
Axel Boldt, Alessandro Sigala, and countless other users all over the
'net).

The latest revision of this document, in various formats, can always
be found at http://cyberbuzz.gatech.edu/kaboom/linux/Changes-2.4/
<http://cyberbuzz.gatech.edu/kaboom/linux/Changes-2.4/>.

Feel free to translate this document.  If you do so, please send me a
URL to your translation for inclusion in future revisions of this
document.

Last updated: June 11, 2000

Chris Ricker (kaboom@gatech.edu or chris.ricker@genetics.utah.edu).

Current Minimal Requirements
============================

Upgrade to at *least* these software revisions before thinking you've
encountered a bug!  If you're unsure what version you're currently
running, the suggested command should tell you.

Again, keep in mind that this list assumes you are already
functionally running a Linux 2.2 kernel.  Also, not all tools are
necessary on all systems; obviously, if you don't have any PCMCIA (PC
Card) hardware, for example, you probably needn't concern yourself
with pcmcia-cs.

o  Gnu C                  2.7.2.3                 # gcc --version
o  binutils               2.9.1.0.22              # ld -v
o  util-linux             2.10g                   # chsh -v
o  modutils               2.3.10                  # insmod -V
o  e2fsprogs              1.18                    # /sbin/tune2fs --version
o  pcmcia-cs              3.1.13                  # cardmgr -V
o  PPP                    2.4.0b1                 # pppd --version
o  isdn4k-utils           3.1beta7                # isdnctrl 2>&1|grep version
			  
Kernel compilation
==================

GCC
---

You will need at least gcc 2.7.2 to compile the kernel.  You currently
have several options for gcc-derived compilers:  gcc 2.7.2.3, various
versions of egcs, the new gcc 2.95 and upcoming gcc 3.0, and experimental
compilers like pgcc.  For absolute stability, it is still recommended
that gcc 2.7.2.3 be used to compile your kernel.  egcs 1.12 should also
work.  gcc 2.95 is known to have problems, and using pgcc for your kernel
is just asking for trouble.

In addition, please pay attention to compiler optimization.  Anything
greater than -O2 may not be wise.  Similarly, if you choose to use gcc-2.95
or derivatives, be sure not to use -fstrict-aliasing (which, depending on
your version of gcc 2.95, may necessitate using -fno-strict-aliasing).

Binutils
--------

Linux on IA/32 has recently switched from using as86 to using gas for
assembling the 16-bit boot code, removing the need for as86 to compile
your kernel.  This change does, however, mean that you need a recent
release of binutils.

If you can, upgrade to the latest 2.9.5 binutils release.  Older
releases such as 2.8, 2.8.xx, and the FSF's 2.9.1 should be avoided if
at all possible.  The later releases of 2.9.1.0.x (anything where x >= 22)
can and do compile the kernel properly, but there are many benefits
to upgrading to 2.9.5 if you're up to it.

System utils
============

Architectural changes
---------------------

DevFS is now in the kernel.  See Documentation/filesystems/devfs/* in
the kernel source tree for all the gory details.

System V shared memory is now implemented via a virtual filesystem.
You do not have to mount it to use it as long as you can live with the
default maxima for shared memory and segments.  If you wish to change
these variables, you have to mount it with the options nr_blocks
and/or nr_inodes.  POSIX shared memory is also now implemented via a
virtual filesystem.  If you want to use it, you'll need to mount the
filesystem.  The recommended mount location is /dev/shm, and adding the
following line to /etc/fstab should take care of things:

none		/dev/shm	shm		defaults	0 0

Remember to create the directory that you intend to mount shm on if
necessary.

The Logical Volume Manager (LVM) is now in the kernel.  If you want to
use this, you'll need to install the necessary LVM toolset.

32-bit UID support is now in place.  Have fun!

Linux documentation for functions is transitioning to inline
documentation via specially-formatted comments near their
definitions in the source.  These comments can be combined with the
SGML templates in the Documentation/DocBook directory to make DocBook
files, which can then be converted by DocBook stylesheets to PostScript,
HTML, PDF files, and several other formats.  In order to convert from
DocBook format to a format of your choice, you'll need to install Jade as
well as the desired DocBook stylesheets.

Util-linux
----------

New versions of util-linux provide *fdisk support for larger disks,
support new options to mount, recognize more supported partition
types, and similar goodies.  You'll probably want to upgrade.

Ksymoops
--------

If the unthinkable happens and your kernel oopses, you'll need a 2.3
version of ksymoops to decode the report; see REPORTING-BUGS in the
root of the Linux source for more information.

Modutils
--------

Upgrade to recent modutils to fix various outstanding bugs which are
seen more frequently under 2.3.x, and to enable auto-loading of USB
modules.

E2fsprogs
---------

The latest version of e2fsprogs fixes several bugs in fsck and
debugfs.  Obviously, it's a good idea to upgrade.

Pcmcia-cs
---------

PCMCIA (PC Card) support is now partially implemented in the main
kernel source.  Pay attention when you recompile your kernel ;-).
Also, be sure to upgrade to the latest pcmcia-cs release.

Intel P6 microcode
------------------

A driver has been added to allow updating of Intel P6 microcode,
accessible as both a devfs regular file and as a normal (misc)
character device.  If you are not using devfs you may need to:

mkdir /dev/cpu
mknod /dev/cpu/microcode c 10 184
chmod 0644 /dev/cpu/microcode

as root before you can use this.  You'll probably also want to
get the user-space microcode_ctl utility to use with this.

Networking
==========

General changes
---------------

The IP firewalling and NAT code has been replaced again.  The new
netfilter software (including ipfwadm and ipchains backwards-
compatible modules) is currently distributed separately.

If you have advanced network configuration needs, you should probably
consider using the network tools from ip-route2.

PPP
---

The PPP driver has been restructured to support multilink and to
enable it to operate over diverse media layers.  If you use PPP,
upgrade pppd to at least 2.4.0b1.

If you are not using devfs, you must have the device file /dev/ppp
which can be made by:

mknod /dev/ppp c 108 0

as root.

If you build ppp support as modules, you will need the following in
your /etc/modules.conf file:

alias char-major-108	ppp_generic
alias /dev/ppp		ppp_generic
alias tty-ldisc-3	ppp_async
alias tty-ldisc-14	ppp_synctty
alias ppp-compress-21	bsd_comp
alias ppp-compress-24	ppp_deflate
alias ppp-compress-26	ppp_deflate

If you use devfsd and build ppp support as modules, you will need
the following in your /etc/devfsd.conf file:

LOOKUP	PPP	MODLOAD

Isdn4k-utils
------------

Due to changes in the length of the phone number field, isdn4k-utils
needs to be recompiled or (preferably) upgraded.

Getting updated software
========================

Compilers
*********

gcc 2.7.2.3
-----------
o  ftp://ftp.gnu.org/gnu/gcc/gcc-2.7.2.3.tar.gz
     <ftp://ftp.gnu.org/gnu/gcc/gcc-2.7.2.3.tar.gz>
o  ftp://metalab.unc.edu/pub/gnu/gcc-2.7.2.3.tar.gz
     <ftp://metalab.unc.edu/pub/gnu/gcc-2.7.2.3.tar.gz>

egcs 1.12
---------
o  ftp://ftp.varesearch.com/pub/support/hjl/gcc/egcs-1.1.2/egcs-1.1.2-glibc.x86.tar.bz2
     <ftp://ftp.varesearch.com/pub/support/hjl/gcc/egcs-1.1.2/egcs-1.1.2-glibc.x86.tar.bz2>
o  ftp://ftp.varesearch.com/pub/support/hjl/gcc/egcs-1.1.2/egcs-1.1.2-libc5.x86.tar.bz2
     <ftp://ftp.varesearch.com/pub/support/hjl/gcc/egcs-1.1.2/egcs-1.1.2-libc5.x86.tar.bz2>
o  ftp://ftp.varesearch.com/pub/support/hjl/gcc/egcs-1.1.2/egcs-1.1.2-alpha.tar.bz2
     <ftp://ftp.varesearch.com/pub/support/hjl/gcc/egcs-1.1.2/egcs-1.1.2-alpha.tar.bz2>

Binutils
********

2.9.1 series
------------
o  ftp://ftp.varesearch.com/pub/support/hjl/binutils/2.9.1/binutils-2.9.1.0.25.tar.gz
     <ftp://ftp.varesearch.com/pub/support/hjl/binutils/2.9.1/binutils-2.9.1.0.25.tar.gz>

2.9.5 series
------------
o  ftp://ftp.varesearch.com/pub/support/hjl/binutils/binutils-2.9.5.0.46.tar.gz
     <ftp://ftp.varesearch.com/pub/support/hjl/binutils/binutils-2.9.5.0.46.tar.bz2>

System utilities
****************

Util-linux
----------
o  ftp://ftp.cwi.nl/pub/aeb/util-linux/util-linux-2.10g.tar.gz
     <ftp://ftp.cwi.nl/pub/aeb/util-linux/util-linux-2.10g.tar.gz>

Ksymoops
--------
o  ftp://ftp.kernel.org/pub/linux/utils/kernel/ksymoops/v2.3
     <ftp://ftp.kernel.org/pub/linux/utils/kernel/ksymoops/v2.3>

Modutils
--------
o  ftp://ftp.kernel.org/pub/linux/utils/kernel/modutils/v2.3/modutils-2.3.9.tar.gz
     <ftp://ftp.kernel.org/pub/linux/utils/kernel/modutils/v2.3/modutils-2.3.9.tar.gz>

E2fsprogs
---------
o  http://web.mit.edu/tytso/www/linux/dist/e2fsprogs-1.18.tar.gz
     <http://web.mit.edu/tytso/www/linux/dist/e2fsprogs-1.18.tar.gz>
o  http://web.mit.edu/tytso/www/linux/dist/e2fsprogs-1.18.src.rpm
     <http://web.mit.edu/tytso/www/linux/dist/e2fsprogs-1.18.src.rpm>

LVM toolset
-----------
o  http://linux.msede.com/lvm/ <http://linux.msede.com/lvm/>

Pcmcia-cs
---------
o  ftp://sourceforge.org/pcmcia/pcmcia-cs-3.1.13.tar.gz
     <ftp://sourceforge.org/pcmcia/pcmcia-cs-3.1.13.tar.gz>

Jade
----
o  ftp://ftp.jclark.com/pub/jade/jade-1.2.1.tar.gz
     <ftp://ftp.jclark.com/pub/jade/jade-1.2.1.tar.gz>

DocBook Stylesheets
-------------------
o  http://nwalsh.com/docbook/dsssl/
     <http://nwalsh.com/docbook/dsssl/>

Intel P6 microcode
------------------
o  http://www.urbanmyth.org/microcode/
     <http://www.urbanmyth.org/microcode/>

Network
*******

PPP
---
o  ftp://linuxcare.com.au/pub/ppp/ppp-2.4.0b1.tar.gz
     <ftp://linuxcare.com.au/pub/ppp/ppp-2.4.0b1.tar.gz>

Isdn4k-utils
------------
o  ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/testing/isdn4k-
     utils.v3.1beta7.tar.gz
     <ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/testing/isdn4k-
     utils.v3.1beta7.tar.gz>

Netfilter
---------
o  http://netfilter.filewatcher.org/iptables-1.1.1.tar.bz2
     <http://netfilter.filewatcher.org/iptables-1.1.1.tar.bz2>
o  http://www.samba.org/netfilter/iptables-1.1.1.tar.bz2
     <http://www.samba.org/netfilter/iptables-1.1.1.tar.bz2>
o  http://netfilter.kernelnotes.org/iptables-1.1.1.tar.bz2
     <http://netfilter.kernelnotes.org/iptables-1.1.1.tar.bz2>

Ip-route2
---------
o  ftp://ftp.inr.ac.ru/ip-routing/iproute2-2.2.4-now-ss991023.tar.gz
     <ftp://ftp.inr.ac.ru/ip-routing/iproute2-2.2.4-now-ss991023.tar.gz>

Suggestions and corrections
===========================

Please feel free to submit changes, corrections, gripes, flames,
money, etc. to me <chris.ricker@genetics.utah.edu>.  Happy Linuxing!