1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
|
bttv.o
the bt848 (grabber chip) driver
insmod args:
card=n card type, see cardlist for a list.
radio=0/1 card supports radio
pll=0/1/2 pll settings
0: don't use PLL
1: 28 MHz crystal installed
2: 35 MHz crystal installed
triton1=0/1 for Triton1 compatibility
Triton1 is automatically recognized
but this might also help with other chipsets
bigendian=n Set the endianness of the gfx framebuffer.
Default is native endian.
fieldnr=0/1 Count fields. Some TV descrambling software
needs this, for others it only generates
50 useless IRQs/sec. default is 0 (off).
autoload=0/1 autoload helper modules (tuner, audio).
default is 1 (on).
verbose=0/1/2 verbose level (at insmod time, while looking at
the hardware). default is 1.
debug=0/1 debug messages (for capture).
default is 0 (off).
gbuffers=2-64 number of capture buffers for mmap'ed capture.
default is 2.
gbufsize=n size of capture buffers. default and
maximum value is 0x208000 (~2MB)
remap, card, radio and pll accept up to four comma-separated arguments
(for multiple boards).
msp3400.o
The driver for the msp34xx sound processor chips. If you have a
stereo card, you probably want to insmod this one.
insmod args:
debug=1/2 print some debug info to the syslog,
2 is more verbose.
simple=1 Use the "short programming" method. Newer
msp34xx versions support this. You need this
for dbx stereo.
once=1 Don't check the TV-stations Audio mode
every few seconds, but only once after
channel switches.
amsound=1 Audio carrier is AM/NICAM at 6.5 Mhz. This
should improve things for french people, the
carrier autoscan seems to work with FM only...
mixer=n allocate mixer device #n. Default is the
first free slot.
tea6300.o
The driver for the tea6300 fader chip. If you have a stereo
card and the msp3400.o doesn't work, you might want to try this
one. This chip is seen on most STB TV/FM cards (usually from
Gateway OEM sold surplus on auction sites).
insmod args:
debug=1 print some debug info to the syslog.
tda8425.o
The driver for the tda8425 fader chip. This driver used to be
part of bttv.c, so if your sound used to work but does not
anymore, try loading this module.
insmod args:
debug=1 print some debug info to the syslog.
tda985x.o
The driver for the tda9850/55 audio chips.
insmod args:
debug=1 print some debug info to the syslog.
chip=9850/9855 set the chip type.
tuner.o
The tuner driver. You need this unless you want to use only
with a camera or external tuner ...
insmod args:
debug=1 print some debug info to the syslog
type=n type of the tuner chip. n as follows:
0: Temic PAL tuner
1: Philips PAL_I tuner
2: Philips NTSC tuner
3: Philips SECAM tuner
4: no tuner
5: Philips PAL tuner
6: Temic NTSC tuner
7: Temic PAL tuner
|
