path: root/arch/arm/config.in

#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
mainmenu_name "Linux Kernel Configuration"

define_bool CONFIG_ARM y
define_bool CONFIG_EISA n
define_bool CONFIG_SBUS n
define_bool CONFIG_MCA n
define_bool CONFIG_UID16 y


mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
bool 'Prompt for obsolete code/drivers' CONFIG_OBSOLETE
endmenu


mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
   bool '  Kernel module loader' CONFIG_KMOD
fi
endmenu


mainmenu_option next_comment
comment 'System Type'

choice 'ARM system type'	\
	"Archimedes/A5000	CONFIG_ARCH_ARCA5K \
	 Cirrus-CL-PS7500FE     CONFIG_ARCH_CLPS7500 \
	 Co-EBSA285		CONFIG_ARCH_CO285 \
	 EBSA-110		CONFIG_ARCH_EBSA110 \
	 FootBridge		CONFIG_ARCH_FOOTBRIDGE \
	 Integrator		CONFIG_ARCH_INTEGRATOR \
	 RiscPC			CONFIG_ARCH_RPC \
 	 SA1100-based		CONFIG_ARCH_SA1100" RiscPC

# the following are placeholders for when they are fully integrated
#	 LinkUp-L7200		CONFIG_ARCH_L7200

mainmenu_option next_comment
comment 'Archimedes/A5000 Implementations'
if [ "$CONFIG_ARCH_ARCA5K" = "y" ]; then
   # These architectures will be combined.  However, until this
   # is complete...  Note that the ARC will take precidence over
   # A5K
   comment 'Archimedes/A5000 Implementations (select only ONE)'

   bool '  Archimedes' CONFIG_ARCH_ARC
   bool '  A5000' CONFIG_ARCH_A5K
fi
endmenu

mainmenu_option next_comment
comment 'Footbridge Implementations'
if [ "$CONFIG_ARCH_FOOTBRIDGE" = "y" ]; then
   bool '  CATS' CONFIG_ARCH_CATS
   bool '  Compaq Personal Server' CONFIG_ARCH_PERSONAL_SERVER
   bool '  EBSA285 (addin mode)' CONFIG_ARCH_EBSA285_ADDIN
   bool '  EBSA285 (host mode)' CONFIG_ARCH_EBSA285_HOST
   bool '  NetWinder' CONFIG_ARCH_NETWINDER
fi
endmenu

mainmenu_option next_comment
comment 'SA11x0 Implementations'
if [ "$CONFIG_ARCH_SA1100" = "y" ]; then

   bool '  Assabet' CONFIG_SA1100_ASSABET
   if [ "$CONFIG_SA1100_ASSABET" = "y" ]; then
      bool '    Include support for Neponset' CONFIG_ASSABET_NEPONSET
   fi
   bool '  Brutus' CONFIG_SA1100_BRUTUS
   bool '  CerfBoard' CONFIG_SA1100_CERF
   bool '  Compaq iPAQ H3600 (Bitsy)' CONFIG_SA1100_BITSY
#   bool '  Empeg' CONFIG_SA1100_EMPEG
#   bool '  Itsy' CONFIG_SA1100_ITSY
   bool '  LART' CONFIG_SA1100_LART
#   bool '  PLEB' CONFIG_SA1100_PLEB
   bool '  ThinClient' CONFIG_SA1100_THINCLIENT
   bool '  GraphicsClient' CONFIG_SA1100_GRAPHICSCLIENT
   bool '  nanoEngine' CONFIG_SA1100_NANOENGINE
   bool '  Victor' CONFIG_SA1100_VICTOR
#   bool '  Tifon' CONFIG_SA1100_TIFON
   bool '  XP860' CONFIG_SA1100_XP860

   # Someday, we'll support this as a general option.
   bool '  Load kernel using Angel Debug Monitor' CONFIG_ANGELBOOT

   # Determine if SA1111 support is required
   if [ "$CONFIG_ASSABET_NEPONSET" = "y" -o \
	"$CONFIG_SA1100_XP860" = "y" ]; then
      define_bool CONFIG_SA1111 y
   fi
fi
endmenu

# Definitions to make life easier
if [ "$CONFIG_ARCH_ARCA5K" = "y" -o \
     "$CONFIG_ARCH_RPC" = "y" ]; then
   define_bool CONFIG_ARCH_ACORN y
else
   define_bool CONFIG_ARCH_ACORN n
fi

# see Documentation/arm/ConfigVars for a description of these
if [ "$CONFIG_ARCH_CO285" = "y" -o \
     "$CONFIG_ARCH_FOOTBRIDGE" = "y" ]; then
   define_bool CONFIG_FOOTBRIDGE y
else
   define_bool CONFIG_FOOTBRIDGE n
fi
if [ "$CONFIG_ARCH_CATS" = "y" -o \
     "$CONFIG_ARCH_EBSA285_HOST" = "y" -o \
     "$CONFIG_ARCH_NETWINDER" = "y" -o \
     "$CONFIG_ARCH_PERSONAL_SERVER" = "y" ]; then
   define_bool CONFIG_FOOTBRIDGE_HOST y
else
   define_bool CONFIG_FOOTBRIDGE_HOST n
fi
if [ "$CONFIG_ARCH_CO285" = "y" -o \
     "$CONFIG_ARCH_EBSA285_ADDIN" = "y" ]; then
   define_bool CONFIG_FOOTBRIDGE_ADDIN y
else
   define_bool CONFIG_FOOTBRIDGE_ADDIN n
fi
if [ "$CONFIG_ARCH_EBSA285_HOST" = "y" -o \
     "$CONFIG_ARCH_EBSA285_ADDIN" = "y" ]; then
   define_bool CONFIG_ARCH_EBSA285 y
fi

# Figure out whether this system uses 26-bit or 32-bit CPUs.
if [ "$CONFIG_ARCH_ARCA5K" = "y" ]; then
   define_bool CONFIG_CPU_32 n
   define_bool CONFIG_CPU_26 y
   bool '2MB physical memory' CONFIG_PAGESIZE_16
else
   define_bool CONFIG_CPU_32 y
   define_bool CONFIG_CPU_26 n
fi

comment 'Processor Type'

# Select CPU and optimisation dependent on architecture
if [ "$CONFIG_ARCH_RPC" = "y" ]; then
   define_bool CONFIG_CPU_32v3 y
   bool 'Support ARM610 processor' CONFIG_CPU_ARM6
   bool 'Support ARM710 processor' CONFIG_CPU_ARM7
   bool 'Support StrongARM(R) SA-110 processor' CONFIG_CPU_SA110
fi
if [ "$CONFIG_ARCH_EBSA110" = "y" -o \
     "$CONFIG_FOOTBRIDGE" = "y" -o \
     "$CONFIG_ARCH_TBOX" = "y" -o \
     "$CONFIG_ARCH_SHARK" = "y" -o \
     "$CONFIG_ARCH_NEXUSPCI" = "y" ]; then
   define_bool CONFIG_CPU_32v4 y
   define_bool CONFIG_CPU_SA110 y
fi
if [ "$CONFIG_ARCH_CLPS7500" = "y" ]; then
   define_bool CONFIG_CPU_32v3 y
   define_bool CONFIG_CPU_ARM7 y
fi
if [ "$CONFIG_ARCH_L7200" = "y" ]; then
   define_bool CONFIG_CPU_32v4 y
   define_bool CONFIG_CPU_ARM720 y
fi
if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
   define_bool CONFIG_CPU_32v4 y
   bool 'Support ARM720 processor' CONFIG_CPU_ARM720
   bool 'Support ARM920 processor' CONFIG_CPU_ARM920
#   bool 'Support ARM10 processor' CONFIG_CPU_ARM10
fi
if [ "$CONFIG_ARCH_SA1100" = "y" ]; then
   define_bool CONFIG_CPU_32v4 y
   define_bool CONFIG_CPU_SA1100 y
fi

if [ "$CONFIG_CPU_ARM920" = "y" ]; then
   bool '  ARM920 CPU idle' CONFIG_CPU_ARM920_CPU_IDLE
   bool '  ARM920 I-Cache on' CONFIG_CPU_ARM920_I_CACHE_ON
   bool '  ARM920 D-Cache on' CONFIG_CPU_ARM920_D_CACHE_ON
   if [ "$CONFIG_CPU_ARM920_D_CACHE_ON" = "y" ] ; then
      bool '  Force write through caches on ARM920' CONFIG_CPU_ARM920_WRITETHROUGH
   fi
fi
#if [ "$CONFIG_CPU_ARM10" = "y" ]; then
#   bool '  ARM10 I-Cache on' CONFIG_CPU_ARM10_I_CACHE_ON
#   bool '  ARM10 D-Cache on' CONFIG_CPU_ARM10_D_CACHE_ON
#   if [ "$CONFIG_CPU_ARM10_D_CACHE_ON" = "y" ] ; then
#      bool '  Force write through caches on ARM10' CONFIG_CPU_ARM10_FORCE_WRITE_THROUGH
#   fi
#fi

# Select various configuration options depending on the machine type
if [ "$CONFIG_ARCH_SA1100" = "y" ]; then
   define_bool CONFIG_DISCONTIGMEM y
else
   define_bool CONFIG_DISCONTIGMEM n
fi

endmenu

mainmenu_option next_comment
comment 'General setup'

# Now handle the bus types
if [ "$CONFIG_ARCH_NEXUSPCI" = "y" -o \
     "$CONFIG_FOOTBRIDGE_HOST" = "y" ]; then
   define_bool CONFIG_PCI y
else
   if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
      bool 'PCI support' CONFIG_PCI_INTEGRATOR
      define_bool CONFIG_PCI $CONFIG_PCI_INTEGRATOR
   else
      define_bool CONFIG_PCI n
   fi
fi

if [ "$CONFIG_FOOTBRIDGE_HOST" = "y" -o \
     "$CONFIG_ARCH_SHARK" = "y" ]; then
   define_bool CONFIG_ISA y
   define_bool CONFIG_ISA_DMA y
else
   define_bool CONFIG_ISA n
   define_bool CONFIG_ISA_DMA n
fi

# Do we have a PC-type keyboard in this architecture?
if [ "$CONFIG_FOOTBRIDGE_HOST" = "y" ]; then
   define_bool CONFIG_PC_KEYB y
   define_bool CONFIG_PC_KEYMAP y
fi
if [ "$CONFIG_SA1100_ASSABET" = "y" ]; then
   define_bool CONFIG_PC_KEYMAP y
fi

source drivers/pci/Config.in
bool 'Support hot-pluggable devices' CONFIG_HOTPLUG
if [ "$CONFIG_HOTPLUG" = "y" ]; then
   source drivers/pcmcia/Config.in
else
   define_bool CONFIG_PCMCIA n
fi
bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
tristate 'NWFPE math emulation' CONFIG_NWFPE
choice 'Kernel core (/proc/kcore) format' \
	"ELF		CONFIG_KCORE_ELF	\
	 A.OUT		CONFIG_KCORE_AOUT" ELF
tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC

if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   bool 'Power Management support' CONFIG_PM
fi

if [ "$CONFIG_CPU_32" = "y" ]; then
   tristate 'RISC OS personality' CONFIG_ARTHUR
fi
if [ "$CONFIG_ARCH_EBSA110" = "y" -o \
     "$CONFIG_ARCH_SA1100" = "y" -o \
     "$CONFIG_ARCH_CLPS7500" = "y" -o \
     "$CONFIG_ARCH_PERSONAL_SERVER" = "y" -o \
     "$CONFIG_ARCH_CATS" = "y" -o \
     "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
   string 'Default kernel command string' CONFIG_CMDLINE ""
fi
if [ "$CONFIG_ARCH_NETWINDER" = "y" -o \
     "$CONFIG_ARCH_EBSA110" = "y" -o   \
     "$CONFIG_ARCH_EBSA285" = "y" -o   \
     "$CONFIG_ARCH_CO285" = "y" -o     \
     "$CONFIG_ARCH_SA1100" = "y" -o    \
     "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
   bool 'Timer and CPU usage LEDs' CONFIG_LEDS
   if [ "$CONFIG_LEDS" = "y" ]; then
      if [ "$CONFIG_ARCH_NETWINDER" = "y" -o \
	   "$CONFIG_ARCH_EBSA285" = "y" -o   \
	   "$CONFIG_ARCH_CO285" = "y" -o     \
	   "$CONFIG_ARCH_SA1100" = "y" -o    \
           "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
         bool '  Timer LED' CONFIG_LEDS_TIMER
         bool '  CPU usage LED' CONFIG_LEDS_CPU
      fi
   fi
   if [ "$CONFIG_ARCH_EBSA110" = "y" ]; then
      define_bool CONFIG_LEDS_TIMER y
   fi
fi
if [ "$CONFIG_CPU_32" = "y" -a "$CONFIG_ARCH_EBSA110" != "y" ]; then
   bool 'Kernel-mode alignment trap handler' CONFIG_ALIGNMENT_TRAP
fi
endmenu

source drivers/parport/Config.in
source drivers/mtd/Config.in
source drivers/pnp/Config.in
source drivers/block/Config.in
source drivers/md/Config.in

if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
   source drivers/acorn/block/Config.in
fi

if [ "$CONFIG_NET" = "y" ]; then
   source net/Config.in

   mainmenu_option next_comment
   comment 'Network device support'

   bool 'Network device support?' CONFIG_NETDEVICES
   if [ "$CONFIG_NETDEVICES" = "y" ]; then
      source drivers/net/Config.in
   fi
   endmenu

   source net/ax25/Config.in

   source net/irda/Config.in
fi

mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support'

tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE

if [ "$CONFIG_IDE" != "n" ]; then
  source drivers/ide/Config.in
else
  define_bool CONFIG_BLK_DEV_IDE_MODES n
  define_bool CONFIG_BLK_DEV_HD n
fi
endmenu

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support?' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
   source drivers/scsi/Config.in
fi
endmenu

source drivers/ieee1394/Config.in

source drivers/i2o/Config.in

mainmenu_option next_comment
comment 'ISDN subsystem'

tristate 'ISDN support' CONFIG_ISDN
if [ "$CONFIG_ISDN" != "n" ]; then
   source drivers/isdn/Config.in
fi
endmenu

source drivers/char/Config.in
if [ "$CONFIG_ARCH_ACORN" = "y" -a \
     "$CONFIG_BUSMOUSE" = "y" ]; then
   if [ "$CONFIG_ARCH_RPC" != "y" ]; then
      define_bool CONFIG_KBDMOUSE y
   else
      define_bool CONFIG_RPCMOUSE y
   fi
fi

source fs/Config.in

if [ "$CONFIG_VT" = "y" ]; then
   mainmenu_option next_comment
   comment 'Console drivers'
   if [ "$CONFIG_ARCH_ACORN" != "y" -a "$CONFIG_ARCH_EBSA110" != "y" ]; then
      bool 'VGA text console' CONFIG_VGA_CONSOLE
   fi
   bool 'Support Frame buffer devices' CONFIG_FB
   source drivers/video/Config.in
   endmenu
fi

if [ "$CONFIG_ARCH_ACORN" = "y" -o \
     "$CONFIG_ARCH_CLPS7500" = "y" -o \
     "$CONFIG_ARCH_SHARK" = "y" -o \
     "$CONFIG_PCI" = "y" ]; then
   mainmenu_option next_comment
   comment 'Sound'

   tristate 'Sound support' CONFIG_SOUND
   if [ "$CONFIG_SOUND" != "n" ]; then
      source drivers/sound/Config.in
   fi
   endmenu
fi

source drivers/usb/Config.in


mainmenu_option next_comment
comment 'Kernel hacking'

# Always compile kernel with framepointer (until 2.4 real comes out)
# Bug reports aren't much use without this.
#bool 'Compile kernel with frame pointer (for useful debugging)' CONFIG_FRAME_POINTER
define_bool CONFIG_FRAME_POINTER y
bool 'Verbose kernel error messages' CONFIG_DEBUG_ERRORS
bool 'Verbose user fault messages' CONFIG_DEBUG_USER
bool 'Include debugging information in kernel binary' CONFIG_DEBUG_INFO
bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
if [ "$CONFIG_CPU_26" = "y" ]; then
   bool 'Disable pgtable cache' CONFIG_NO_PGT_CACHE
fi
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   # These options are only for real kernel hackers
   # who want to get their hands dirty. 
   bool 'Kernel low-level debugging functions' CONFIG_DEBUG_LL
   if [ "$CONFIG_DEBUG_LL" = "y" ]; then
      if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
         bool 'Kernel low-level debugging messages via footbridge serial port' CONFIG_DEBUG_DC21285_PORT
      fi
   fi
fi
endmenu