path: root/arch/arm/kernel/entry-armv.S

/*
 * linux/arch/arm/kernel/entry-armv.S
 *
 * Copyright (C) 1996,1997,1998 Russell King.
 * ARM700 fix by Matthew Godbolt (linux-user@willothewisp.demon.co.uk)
 *
 * Low-level vector interface routines
 *
 * Note:  there is a StrongARM bug in the STMIA rn, {regs}^ instruction that causes
 * it to save wrong values...  Be aware!
 */
#include <linux/config.h> /* for CONFIG_ARCH_xxxx */
#include <linux/linkage.h>

#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/hardware.h>
#include <asm/arch/irqs.h>
#include <asm/proc-fns.h>

#include "../lib/constants.h"

#ifndef MODE_SVC
#define MODE_SVC 0x13
#endif

		.macro	zero_fp
#ifdef CONFIG_FRAME_POINTER
		mov	fp, #0
#endif
		.endm

		.text

#define PF_TRACESYS	0x20

@ Bad Abort numbers
@ -----------------
@
#define BAD_PREFETCH	0
#define BAD_DATA	1
#define BAD_ADDREXCPTN	2
#define BAD_IRQ		3
#define BAD_UNDEFINSTR	4

@ OS version number used in SWIs
@  RISC OS is 0
@  RISC iX is 8
@
#define OS_NUMBER	9

@
@ Stack format (ensured by USER_* and SVC_*)
@
#define S_FRAME_SIZE	72
#define S_OLD_R0	68
#define S_PSR		64
#define S_PC		60
#define S_LR		56
#define S_SP		52
#define S_IP		48
#define S_FP		44
#define S_R10		40
#define S_R9		36
#define S_R8		32
#define S_R7		28
#define S_R6		24
#define S_R5		20
#define S_R4		16
#define S_R3		12
#define S_R2		8
#define S_R1		4
#define S_R0		0

#define OFF_CR_ALIGNMENT(x)	cr_alignment - x

#ifdef IOC_BASE
/* IOC / IOMD based hardware */
#include <asm/iomd.h>

		.equ	ioc_base_high, IOC_BASE & 0xff000000
		.equ	ioc_base_low, IOC_BASE & 0x00ff0000
		.macro	disable_fiq
		mov	r12, #ioc_base_high
		.if	ioc_base_low
		orr	r12, r12, #ioc_base_low
		.endif
		strb	r12, [r12, #0x38]	@ Disable FIQ register
		.endm

		.macro	get_irqnr_and_base, irqnr, irqstat, base
		mov	r4, #ioc_base_high		@ point at IOC
		.if	ioc_base_low
		orr	r4, r4, #ioc_base_low
		.endif
		ldrb	\irqstat, [r4, #0x24]		@ get high priority first
		adr	\base, irq_prio_h
		teq	\irqstat, #0
#ifdef IOMD_BASE
		ldreqb	\irqstat, [r4, #0x1f4]		@ get dma
		adreq	\base, irq_prio_d
		teqeq	\irqstat, #0
#endif
		ldreqb	\irqstat, [r4, #0x14]		@ get low priority
		adreq	\base, irq_prio_l

		teq	\irqstat, #0
		ldrneb	\irqnr, [\base, \irqstat]	@ get IRQ number
		.endm

/*
 * Interrupt table (incorporates priority)
 */
		.macro	irq_prio_table
irq_prio_l:	.byte	 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
		.byte	 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
#ifdef IOMD_BASE
irq_prio_d:	.byte	 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
		.byte	20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
#endif
irq_prio_h:	.byte	 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
		.byte	12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
		.endm

#elif defined(CONFIG_ARCH_EBSA110)

		.macro	disable_fiq
		.endm

		.macro	get_irqnr_and_base, irqnr, irqstat, base
		mov	r4, #0xf3000000
		ldrb	\irqstat, [r4]			@ get interrupts
		adr	\base, irq_prio_ebsa110

		teq	\irqstat, #0
		ldrneb	\irqnr, [\base, \irqstat]	@ get IRQ number
		.endm

		.macro	irq_prio_table
irq_prio_ebsa110:
		.byte	 0, 0, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2
		.byte	 4, 4, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2
		.byte	 5, 5, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2
		.byte	 5, 5, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2

		.byte	 6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2
		.byte	 6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2
		.byte	 6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2
		.byte	 6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2

		.byte	 7, 0, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2
		.byte	 4, 4, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2
		.byte	 5, 5, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2
		.byte	 5, 5, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2

		.byte	 6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2
		.byte	 6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2
		.byte	 6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2
		.byte	 6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2
		.endm

#elif defined(CONFIG_ARCH_SHARK)

		.macro	disable_fiq
		.endm

		.macro	get_irqnr_and_base, irqnr, irqstat, base
		mov	r4, #0xe0000000
		orr	r4, r4, #0x20

		mov	\irqstat, #0x0C
		strb	\irqstat, [r4]			@outb(0x0C, 0x20) /* Poll command */
		ldrb	\irqnr, [r4]			@irq = inb(0x20) & 7
		and	\irqstat, \irqnr, #0x80
		teq	\irqstat, #0
		beq	43f
		and	\irqnr, \irqnr, #7
		teq	\irqnr, #2
		bne	44f
43:		mov	\irqstat, #0x0C
		strb	\irqstat, [r4, #0x80]		@outb(0x0C, 0xA0) /* Poll command */
		ldrb	\irqnr, [r4, #0x80]		@irq = (inb(0xA0) & 7) + 8
		and	\irqstat, \irqnr, #0x80
		teq	\irqstat, #0
		beq	44f
		and	\irqnr, \irqnr, #7
		add	\irqnr, \irqnr, #8
44:		teq	\irqstat, #0
		.endm

		.macro	irq_prio_table
		.endm

#elif defined(CONFIG_HOST_FOOTBRIDGE) || defined(CONFIG_ADDIN_FOOTBRIDGE)
#include <asm/dec21285.h>

		.macro	disable_fiq
		.endm

		.equ	irq_mask_pci_err_high, IRQ_MASK_PCI_ERR & 0xff000000
		.equ	irq_mask_pci_err_low,  IRQ_MASK_PCI_ERR & 0x00ffffff
		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
		.equ	dc21285_low, ARMCSR_BASE & 0x00ffffff

		.macro	get_irqnr_and_base, irqnr, irqstat, base
		mov	r4, #dc21285_high
		.if	dc21285_low
		orr	r4, r4, #dc21285_low
		.endif
		ldr	\irqstat, [r4, #0x180]		@ get interrupts

		mov	\irqnr, #IRQ_SDRAMPARITY
		tst	\irqstat, #IRQ_MASK_SDRAMPARITY
		bne	1001f

		tst	\irqstat, #IRQ_MASK_UART_RX
		movne	\irqnr, #IRQ_CONRX
		bne	1001f

		tst	\irqstat, #IRQ_MASK_DMA1
		movne	\irqnr, #IRQ_DMA1
		bne	1001f

		tst	\irqstat, #IRQ_MASK_DMA2
		movne	\irqnr, #IRQ_DMA2
		bne	1001f

		tst	\irqstat, #IRQ_MASK_IN0
		movne	\irqnr, #IRQ_IN0
		bne	1001f

		tst	\irqstat, #IRQ_MASK_IN1
		movne	\irqnr, #IRQ_IN1
		bne	1001f

		tst	\irqstat, #IRQ_MASK_IN2
		movne	\irqnr, #IRQ_IN2
		bne	1001f

		tst	\irqstat, #IRQ_MASK_IN3
		movne	\irqnr, #IRQ_IN3
		bne	1001f

		tst	\irqstat, #IRQ_MASK_PCI
		movne	\irqnr, #IRQ_PCI
		bne	1001f

		tst	\irqstat, #IRQ_MASK_DOORBELLHOST
		movne	\irqnr, #IRQ_DOORBELLHOST
		bne     1001f
	
		tst	\irqstat, #IRQ_MASK_I2OINPOST
		movne	\irqnr, #IRQ_I2OINPOST
		bne	1001f

		tst	\irqstat, #IRQ_MASK_TIMER1
		movne	\irqnr, #IRQ_TIMER1
		bne	1001f

		tst	\irqstat, #IRQ_MASK_TIMER2
		movne	\irqnr, #IRQ_TIMER2
		bne	1001f

		tst	\irqstat, #IRQ_MASK_TIMER3
		movne	\irqnr, #IRQ_TIMER3
		bne	1001f

		tst	\irqstat, #IRQ_MASK_UART_TX
		movne	\irqnr, #IRQ_CONTX
		bne	1001f

		tst	\irqstat, #irq_mask_pci_err_high
		tsteq	\irqstat, #irq_mask_pci_err_low
		movne	\irqnr, #IRQ_PCI_ERR
		bne	1001f
1001:
		.endm

		.macro	irq_prio_table
		.endm

#elif defined(CONFIG_ARCH_NEXUSPCI)

		.macro	disable_fiq
		.endm

		.macro	get_irqnr_and_base, irqnr, irqstat, base
		ldr	\irqstat, =INTCONT_BASE
		ldr	\base, =soft_irq_mask
		ldr	\irqstat, [\irqstat]		@ get interrupts
		ldr	\base, [\base]
		mov	\irqnr, #0
		and	\irqstat, \irqstat, \base	@ mask out disabled ones
1001:		tst	\irqstat, #1
		addeq	\irqnr, \irqnr, #1
		moveq	\irqstat, \irqstat, lsr #1
		tsteq	\irqnr, #32
		beq	1001b
		teq	\irqnr, #32
		.endm

		.macro	irq_prio_table
		.ltorg
		.bss
ENTRY(soft_irq_mask)
		.word	0
		.text
		.endm

#elif defined(CONFIG_ARCH_TBOX)

		.macro	disable_fiq
		.endm

		.macro	get_irqnr_and_base, irqnr, irqstat, base
		ldr	\irqstat, =0xffff7000
		ldr	\irqstat, [\irqstat]		@ get interrupts
		ldr	\base, =soft_irq_mask
		ldr	\base, [\base]
		mov	\irqnr, #0
		and	\irqstat, \irqstat, \base	@ mask out disabled ones
1001:		tst	\irqstat, #1
		addeq	\irqnr, \irqnr, #1
		moveq	\irqstat, \irqstat, lsr #1
		tsteq	\irqnr, #32
		beq	1001b
		teq	\irqnr, #32
		.endm

		.macro	irq_prio_table
		.ltorg
		.bss
ENTRY(soft_irq_mask)
		.word	0
		.text
		.endm

#elif defined(CONFIG_ARCH_SA1100)

		.macro	disable_fiq
		.endm

		.macro	get_irqnr_and_base, irqnr, irqstat, base
		mov	r4, #0xfa000000			@ ICIP = 0xfa050000
		add	r4, r4, #0x00050000
		ldr	\irqstat, [r4]			@ get irqs
		ldr	\irqnr, [r4, #4]		@ ICMR = 0xfa050004
		ands	\irqstat, \irqstat, \irqnr
		mov	\irqnr, #0
		beq	1002f
1001:		tst	\irqstat, #1
		addeq	\irqnr, \irqnr, #1
		moveq	\irqstat, \irqstat, lsr #1
		beq	1001b
1002:
		.endm

		.macro	irq_prio_table
		.endm

#else
#error Unknown architecture
#endif

/*============================================================================
 * For entry-common.S
 */

		.macro	save_user_regs
		sub	sp, sp, #S_FRAME_SIZE
		stmia	sp, {r0 - r12}			@ Calling r0 - r12
		add	r8, sp, #S_PC
		stmdb	r8, {sp, lr}^			@ Calling sp, lr
		str	lr, [r8, #0]			@ Save calling PC
		mrs	r6, spsr
		str	r6, [r8, #4]			@ Save CPSR
		str	r0, [r8, #8]			@ Save OLD_R0
		.endm

		.macro	restore_user_regs
		ldr	r0, [sp, #S_PSR]		@ Get calling cpsr
		msr	cpsr_c, #I_BIT | MODE_SVC	@ disable IRQs
		msr	spsr, r0			@ save in spsr_svc
		ldmia	sp, {r0 - lr}^			@ Get calling r0 - lr
		mov	r0, r0
		ldr	lr, [sp, #S_PC]			@ Get PC
		add	sp, sp, #S_FRAME_SIZE
		movs	pc, lr				@ return & move spsr_svc into cpsr
		.endm

		.macro	mask_pc, rd, rm
		.endm

		/* If we're optimising for StrongARM the resulting code won't 
		   run on an ARM7 and we can save a couple of instructions.  
									--pb */
		.macro	arm700_bug_check, instr, temp
#ifndef __ARM_ARCH_4__
		and	\temp, \instr, #0x0f000000	@ check for SWI
		teq	\temp, #0x0f000000
		bne	.Larm700bug
#endif
		.endm

		.macro	enable_irqs, temp
		mrs	\temp, cpsr
		bic	\temp, \temp, #I_BIT
		msr	cpsr, \temp
		.endm

		.macro	get_current_task, rd
		mov	\rd, sp, lsr #13
		mov	\rd, \rd, lsl #13
		.endm

		/*
		 * Like adr, but force SVC mode (if required)
		 */
		.macro	adrsvc, cond, reg, label
		adr\cond	\reg, \label
		.endm

		.macro	alignment_trap, rbase, rtemp, sym
#ifdef CONFIG_ALIGNMENT_TRAP
		ldr	\rtemp, [\rbase, #OFF_CR_ALIGNMENT(\sym)]
		mcr	p15, 0, \rtemp, c1, c0
#endif
		.endm

/*
 * Invalid mode handlers
 */
__pabt_invalid:	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
		stmia	sp, {r0 - lr}			@ Save XXX r0 - lr
		ldr	r4, .LCabt
		mov	r1, #BAD_PREFETCH
		b	1f

__dabt_invalid:	sub	sp, sp, #S_FRAME_SIZE
		stmia	sp, {r0 - lr}			@ Save SVC r0 - lr [lr *should* be intact]
		ldr	r4, .LCabt
		mov	r1, #BAD_DATA
		b	1f

__irq_invalid:	sub	sp, sp, #S_FRAME_SIZE		@ Allocate space on stack for frame
		stmfd	sp, {r0 - lr}			@ Save r0 - lr
		ldr	r4, .LCirq
		mov	r1, #BAD_IRQ
		b	1f

__und_invalid:	sub	sp, sp, #S_FRAME_SIZE
		stmia	sp, {r0 - lr}
		ldr	r4, .LCund
		mov	r1, #BAD_UNDEFINSTR		@ int reason

1:		zero_fp
		ldmia	r4, {r5 - r7}			@ Get XXX pc, cpsr, old_r0
		add	r4, sp, #S_PC
		stmia	r4, {r5 - r7}			@ Save XXX pc, cpsr, old_r0
		mov	r0, sp
		and	r2, r6, #31			@ int mode
		b	SYMBOL_NAME(bad_mode)

#ifdef CONFIG_NWFPE
		/* The FPE is always present */
		.equ	fpe_not_present, 0
#else
wfs_mask_data:	.word	0x0e200110			@ WFS/RFS
		.word	0x0fef0fff
		.word	0x0d0d0100			@ LDF [sp]/STF [sp]
		.word	0x0d0b0100			@ LDF [fp]/STF [fp]
		.word	0x0f0f0f00

/* We get here if an undefined instruction happens and the floating
 * point emulator is not present.  If the offending instruction was
 * a WFS, we just perform a normal return as if we had emulated the
 * operation.  This is a hack to allow some basic userland binaries
 * to run so that the emulator module proper can be loaded. --philb
 */
fpe_not_present:
		adr	r10, wfs_mask_data
		ldmia	r10, {r4, r5, r6, r7, r8}
		ldr	r10, [sp, #S_PC]		@ Load PC
		sub	r10, r10, #-4
		mask_pc	r10, r10
		ldrt	r10, [r10]			@ get instruction
		and	r5, r10, r5
		teq	r5, r4				@ Is it WFS?
		moveq	pc, r9
		and	r5, r10, r8
		teq	r5, r6				@ Is it LDF/STF on sp or fp?
		teqne	r5, r7
		movne	pc, lr
		tst	r10, #0x00200000		@ Does it have WB
		moveq	pc, r9
		and	r4, r10, #255			@ get offset
		and	r6, r10, #0x000f0000
		tst	r10, #0x00800000		@ +/-
		ldr	r5, [sp, r6, lsr #14]		@ Load reg
		rsbeq	r4, r4, #0
		add	r5, r5, r4, lsl #2
		str	r5, [sp, r6, lsr #14]		@ Save reg
		mov	pc, r9
#endif

/*
 * SVC mode handlers
 */
		.align	5
__dabt_svc:	sub	sp, sp, #S_FRAME_SIZE
		stmia	sp, {r0 - r12}			@ save r0 - r12
		ldr	r2, .LCabt
		add	r0, sp, #S_FRAME_SIZE
		ldmia	r2, {r2 - r4}			@ get pc, cpsr
		add	r5, sp, #S_SP
		mov	r1, lr
		stmia	r5, {r0 - r4}			@ save sp_SVC, lr_SVC, pc, cpsr, old_ro
		mrs	r9, cpsr			@ Enable interrupts if they were
		tst	r3, #I_BIT
		biceq	r9, r9, #I_BIT			@ previously
		mov	r0, r2
/*
 * This routine must not corrupt r9
 */
#ifdef MULTI_CPU
		ldr	r2, .LCprocfns
		mov	lr, pc
		ldr	pc, [r2]			@ call processor specific code
#else
		bl	cpu_data_abort
#endif
		msr	cpsr_c, r9
		mov	r3, sp
		bl	SYMBOL_NAME(do_DataAbort)
		msr	cpsr_c, #I_BIT | MODE_SVC
		ldr	r0, [sp, #S_PSR]
		msr	spsr, r0
		ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr

		.align	5
__irq_svc:	sub	sp, sp, #S_FRAME_SIZE
		stmia	sp, {r0 - r12}			@ save r0 - r12
		ldr	r7, .LCirq
		add	r5, sp, #S_FRAME_SIZE
		ldmia	r7, {r7 - r9}
		add	r4, sp, #S_SP
		mov	r6, lr
		stmia	r4, {r5, r6, r7, r8, r9}	@ save sp_SVC, lr_SVC, pc, cpsr, old_ro
1:		get_irqnr_and_base r0, r6, r5
		movne	r1, sp
		@
		@ routine called with r0 = irq number, r1 = struct pt_regs *
		@
		adrsvc	ne, lr, 1b
		bne	do_IRQ
		ldr	r0, [sp, #S_PSR]		@ irqs are already disabled
		msr	spsr, r0
		ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr

		.align	5
__und_svc:	sub	sp, sp, #S_FRAME_SIZE
		stmia	sp, {r0 - r12}			@ save r0 - r12
		ldr	r7, .LCund
		mov	r6, lr
		ldmia	r7, {r7 - r9}
		add	r5, sp, #S_FRAME_SIZE
		add	r4, sp, #S_SP
		stmia	r4, {r5 - r9}			@ save sp_SVC, lr_SVC, pc, cpsr, old_ro

		adrsvc	al, r9, 1f			@ r9  = normal FP return
		bl	call_fpe			@ lr  = undefined instr return

		mov	r0, r5				@ unsigned long pc
		mov	r1, sp				@ struct pt_regs *regs
		bl	SYMBOL_NAME(do_undefinstr)

1:		msr	cpsr_c, #I_BIT | MODE_SVC
		ldr	lr, [sp, #S_PSR]		@ Get SVC cpsr
		msr	spsr, lr
		ldmia	sp, {r0 - pc}^			@ Restore SVC registers

		.align	5
.LCirq:		.word	__temp_irq
.LCund:		.word	__temp_und
.LCabt:		.word	__temp_abt
#ifdef MULTI_CPU
.LCprocfns:	.word	SYMBOL_NAME(processor)
#endif
.LCfp:		.word	SYMBOL_NAME(fp_enter)
#ifdef CONFIG_ALIGNMENT_TRAP
.LCswi:		.word	SYMBOL_NAME(cr_alignment)
#endif

		irq_prio_table

/*
 * User mode handlers
 */
		.align	5
__dabt_usr:	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
		stmia	sp, {r0 - r12}			@ save r0 - r12
		ldr	r4, .LCabt
		add	r3, sp, #S_PC
		ldmia	r4, {r0 - r2}			@ Get USR pc, cpsr
		stmia	r3, {r0 - r2}			@ Save USR pc, cpsr, old_r0
		stmdb	r3, {sp, lr}^
		alignment_trap r4, r7, __temp_abt
		zero_fp
#ifdef MULTI_CPU
		ldr	r2, .LCprocfns
		mov	lr, pc
		ldr	pc, [r2]			@ call processor specific code
#else
		bl	cpu_data_abort
#endif
		msr	cpsr_c, #MODE_SVC		@ Enable interrupts
		mov	r3, sp
		adrsvc	al, lr, ret_from_sys_call
		b	SYMBOL_NAME(do_DataAbort)

		.align	5
__irq_usr:	sub	sp, sp, #S_FRAME_SIZE
		stmia	sp, {r0 - r12}			@ save r0 - r12
		ldr	r4, .LCirq
		add	r8, sp, #S_PC
		ldmia	r4, {r5 - r7}			@ get saved PC, SPSR
		stmia	r8, {r5 - r7}			@ save pc, psr, old_r0
		stmdb	r8, {sp, lr}^
		alignment_trap r4, r7, __temp_irq
		zero_fp
1:		get_irqnr_and_base r0, r6, r5
		movne	r1, sp
		adrsvc	ne, lr, 1b
		@
		@ routine called with r0 = irq number, r1 = struct pt_regs *
		@
		bne	do_IRQ
		mov	r4, #0
		b	ret_with_reschedule

		.align	5
__und_usr:	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
		stmia	sp, {r0 - r12}			@ Save r0 - r12
		ldr	r4, .LCund
		add	r8, sp, #S_PC
		ldmia	r4, {r5 - r7}
		stmia	r8, {r5 - r7}			@ Save USR pc, cpsr, old_r0
		stmdb	r8, {sp, lr}^			@ Save user r0 - r12
		alignment_trap r4, r7, __temp_und
		zero_fp
		adrsvc	al, r9, ret_from_sys_call	@ r9  = normal FP return
		adrsvc	al, lr, fpundefinstr		@ lr  = undefined instr return

call_fpe:	get_current_task r10
		mov	r8, #1
		strb	r8, [r10, #TSK_USED_MATH]	@ set current->used_math
		ldr	r4, .LCfp
		add	r10, r10, #TSS_FPESAVE		@ r10 = workspace
		ldr	pc, [r4]			@ Call FP module USR entry point

fpundefinstr:	mov	r0, lr
		mov	r1, sp
		msr	cpsr_c, #MODE_SVC		@ Enable interrupts
		adrsvc	al, lr, ret_from_sys_call
		b	SYMBOL_NAME(do_undefinstr)

		.align	5
__pabt_usr:	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
		stmia	sp, {r0 - r12}			@ Save r0 - r12
		ldr	r4, .LCabt
		add	r8, sp, #S_PC
		ldmia	r4, {r5 - r7}			@ Get USR pc, cpsr
		stmia	r8, {r5 - r7}			@ Save USR pc, cpsr, old_r0
		stmdb	r8, {sp, lr}^			@ Save sp_usr lr_usr
		alignment_trap r4, r7, __temp_abt
		zero_fp
		msr	cpsr_c, #MODE_SVC		@ Enable interrupts
		mov	r0, r5				@ address (pc)
		mov	r1, sp				@ regs
		bl	SYMBOL_NAME(do_PrefetchAbort)	@ call abort handler
		teq	r0, #0				@ Does this still apply???
		bne	ret_from_sys_call		@ Return from exception
#ifdef DEBUG_UNDEF
		adr	r0, t
		bl	SYMBOL_NAME(printk)
#endif
		mov	r0, r5
		mov	r1, sp
		and	r2, r6, #31
		bl	SYMBOL_NAME(do_undefinstr)
		ldr	lr, [sp, #S_PSR]		@ Get USR cpsr
		msr	spsr, lr
		ldmia	sp, {r0 - pc}^			@ Restore USR registers

#ifdef DEBUG_UNDEF
t:		.ascii "Prefetch -> undefined instruction\n\0"
		.align
#endif

#include "entry-common.S"

		.text

#ifndef __ARM_ARCH_4__
.Larm700bug:	ldr	r0, [sp, #S_PSR]		@ Get calling cpsr
		str	lr, [r8]
		msr	spsr, r0
		ldmia	sp, {r0 - lr}^			@ Get calling r0 - lr
		mov	r0, r0
		ldr	lr, [sp, #S_PC]			@ Get PC
		add	sp, sp, #S_FRAME_SIZE
		movs	pc, lr
#endif

/*
 * Register switch for ARMv3 and ARMv4 processors
 * r0 = previous, r1 = next, return previous.
 * previous and next are guaranteed not to be the same.
 */
ENTRY(__switch_to)
		stmfd	sp!, {r4 - sl, fp, lr}		@ Store most regs on stack
		mrs	ip, cpsr
		str	ip, [sp, #-4]!			@ Save cpsr_SVC
		str	sp, [r0, #TSS_SAVE]		@ Save sp_SVC
		ldr	sp, [r1, #TSS_SAVE]		@ Get saved sp_SVC
		ldr	r2, [r1, #TSS_DOMAIN]
		ldr	ip, [sp], #4
		mcr	p15, 0, r2, c3, c0		@ Set domain register
		msr	spsr, ip			@ Save tasks CPSR into SPSR for this return
		ldmfd	sp!, {r4 - sl, fp, pc}^		@ Load all regs saved previously

		.section ".text.init",#alloc,#execinstr
/*
 * Vector stubs.  NOTE that we only align 'vector_IRQ' to a cache line boundary,
 * and we rely on each stub being exactly 48 (1.5 cache lines) in size.  This
 * means that we only ever load two cache lines for this code, or one if we're
 * lucky.  We also copy this code to 0x200 so that we can use branches in the
 * vectors, rather than ldr's.
 */
		.align	5
__stubs_start:
/*
 * Interrupt dispatcher
 * Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
 */
vector_IRQ:	@
		@ save mode specific registers
		@
		ldr	r13, .LCsirq
		sub	lr, lr, #4
		str	lr, [r13]			@ save lr_IRQ
		mrs	lr, spsr
		str	lr, [r13, #4]			@ save spsr_IRQ
		@
		@ now branch to the relevent MODE handling routine
		@
		msr	spsr_c, #I_BIT | MODE_SVC	@ switch to SVC_32 mode

		and	lr, lr, #15
		ldr	lr, [pc, lr, lsl #2]
		movs	pc, lr				@ Changes mode and branches

.LCtab_irq:	.word	__irq_usr			@  0  (USR_26 / USR_32)
		.word	__irq_invalid			@  1  (FIQ_26 / FIQ_32)
		.word	__irq_invalid			@  2  (IRQ_26 / IRQ_32)
		.word	__irq_svc			@  3  (SVC_26 / SVC_32)
		.word	__irq_invalid			@  4
		.word	__irq_invalid			@  5
		.word	__irq_invalid			@  6
		.word	__irq_invalid			@  7
		.word	__irq_invalid			@  8
		.word	__irq_invalid			@  9
		.word	__irq_invalid			@  a
		.word	__irq_invalid			@  b
		.word	__irq_invalid			@  c
		.word	__irq_invalid			@  d
		.word	__irq_invalid			@  e
		.word	__irq_invalid			@  f

		.align	5

/*
 * Data abort dispatcher - dispatches it to the correct handler for the processor mode
 * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
 */
vector_data:	@
		@ save mode specific registers
		@
		ldr	r13, .LCsabt
		sub	lr, lr, #8
		str	lr, [r13]
		mrs	lr, spsr
		str	lr, [r13, #4]
		@
		@ now branch to the relevent MODE handling routine
		@
		msr	spsr_c, #I_BIT | MODE_SVC	@ switch to SVC_32 mode

		and	lr, lr, #15
		ldr	lr, [pc, lr, lsl #2]
		movs	pc, lr				@ Changes mode and branches

.LCtab_dabt:	.word	__dabt_usr			@  0  (USR_26 / USR_32)
		.word	__dabt_invalid			@  1  (FIQ_26 / FIQ_32)
		.word	__dabt_invalid			@  2  (IRQ_26 / IRQ_32)
		.word	__dabt_svc			@  3  (SVC_26 / SVC_32)
		.word	__dabt_invalid			@  4
		.word	__dabt_invalid			@  5
		.word	__dabt_invalid			@  6
		.word	__dabt_invalid			@  7
		.word	__dabt_invalid			@  8
		.word	__dabt_invalid			@  9
		.word	__dabt_invalid			@  a
		.word	__dabt_invalid			@  b
		.word	__dabt_invalid			@  c
		.word	__dabt_invalid			@  d
		.word	__dabt_invalid			@  e
		.word	__dabt_invalid			@  f

		.align	5

/*
 * Prefetch abort dispatcher - dispatches it to the correct handler for the processor mode
 * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
 */
vector_prefetch:
		@
		@ save mode specific registers
		@
		ldr	r13, .LCsabt
		sub	lr, lr, #4
		str	lr, [r13]			@ save lr_ABT
		mrs	lr, spsr
		str	lr, [r13, #4]			@ save spsr_ABT
		@
		@ now branch to the relevent MODE handling routine
		@
		msr	spsr_c, #I_BIT | MODE_SVC	@ switch to SVC_32 mode

		ands	lr, lr, #15
		ldreq	lr, .LCtab_pabt
		ldrne	lr, .LCtab_pabt + 4
		movs	pc, lr

.LCtab_pabt:	.word	__pabt_usr
		.word	__pabt_invalid

		.align	5

/*
 * Undef instr entry dispatcher - dispatches it to the correct handler for the processor mode
 * Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
 */
vector_undefinstr:
		@
		@ save mode specific registers
		@
		ldr	r13, .LCsund
		str	lr, [r13]			@ save lr_UND
		mrs	lr, spsr
		str	lr, [r13, #4]			@ save spsr_UND
		@
		@ now branch to the relevent MODE handling routine
		@
		msr	spsr_c, #I_BIT | MODE_SVC	@ switch to SVC_32 mode

		and	lr, lr, #15
		ldr	lr, [pc, lr, lsl #2]
		movs	pc, lr				@ Changes mode and branches

.LCtab_und:	.word	__und_usr			@  0 (USR_26 / USR_32)
		.word	__und_invalid			@  1 (FIQ_26 / FIQ_32)
		.word	__und_invalid			@  2 (IRQ_26 / IRQ_32)
		.word	__und_svc			@  3 (SVC_26 / SVC_32)
		.word	__und_invalid			@  4
		.word	__und_invalid			@  5
		.word	__und_invalid			@  6
		.word	__und_invalid			@  7
		.word	__und_invalid			@  8
		.word	__und_invalid			@  9
		.word	__und_invalid			@  a
		.word	__und_invalid			@  b
		.word	__und_invalid			@  c
		.word	__und_invalid			@  d
		.word	__und_invalid			@  e
		.word	__und_invalid			@  f

		.align	5

/*=============================================================================
 * Undefined FIQs
 *-----------------------------------------------------------------------------
 * Enter in FIQ mode, spsr = ANY CPSR, lr = ANY PC
 * MUST PRESERVE SVC SPSR, but need to switch to SVC mode to show our msg.
 * Basically to switch modes, we *HAVE* to clobber one register...  brain
 * damage alert!  I don't think that we can execute any code in here in any
 * other mode than FIQ...  Ok you can switch to another mode, but you can't
 * get out of that mode without clobbering one register.
 */
vector_FIQ:	disable_fiq
		subs	pc, lr, #4

/*=============================================================================
 * Address exception handler
 *-----------------------------------------------------------------------------
 * These aren't too critical.
 * (they're not supposed to happen, and won't happen in 32-bit data mode).
 */

vector_addrexcptn:
		b	vector_addrexcptn

/*
 * We group all the following data together to optimise
 * for CPUs with separate I & D caches.
 */
		.align	5

.LCvswi:	.word	vector_swi

.LCsirq:	.word	__temp_irq
.LCsund:	.word	__temp_und
.LCsabt:	.word	__temp_abt

__stubs_end:

		.equ	__real_stubs_start, .LCvectors + 0x200

.LCvectors:	swi	SYS_ERROR0
		b	__real_stubs_start + (vector_undefinstr - __stubs_start)
		ldr	pc, __real_stubs_start + (.LCvswi - __stubs_start)
		b	__real_stubs_start + (vector_prefetch - __stubs_start)
		b	__real_stubs_start + (vector_data - __stubs_start)
		b	__real_stubs_start + (vector_addrexcptn - __stubs_start)
		b	__real_stubs_start + (vector_IRQ - __stubs_start)
		b	__real_stubs_start + (vector_FIQ - __stubs_start)

ENTRY(__trap_init)
		stmfd	sp!, {r4 - r6, lr}

		adr	r1, .LCvectors			@ set up the vectors
		mov	r0, #0
		ldmia	r1, {r1, r2, r3, r4, r5, r6, ip, lr}
		stmia	r0, {r1, r2, r3, r4, r5, r6, ip, lr}

		add	r2, r0, #0x200
		adr	r0, __stubs_start		@ copy stubs to 0x200
		adr	r1, __stubs_end
1:		ldr	r3, [r0], #4
		str	r3, [r2], #4
		cmp	r0, r1
		blt	1b
		LOADREGS(fd, sp!, {r4 - r6, pc})

		.data

/*
 * Do not reorder these, and do not insert extra data between...
 */

__temp_irq:	.word	0				@ saved lr_irq
		.word	0				@ saved spsr_irq
		.word	-1				@ old_r0
__temp_und:	.word	0				@ Saved lr_und
		.word	0				@ Saved spsr_und
		.word	-1				@ old_r0
__temp_abt:	.word	0				@ Saved lr_abt
		.word	0				@ Saved spsr_abt
		.word	-1				@ old_r0

		.globl	SYMBOL_NAME(cr_alignment)
		.globl	SYMBOL_NAME(cr_no_alignment)
SYMBOL_NAME(cr_alignment):
		.space	4
SYMBOL_NAME(cr_no_alignment):
		.space	4