path: root/drivers/net/smc-ultra.c

/* smc-ultra.c: A SMC Ultra ethernet driver for linux. */
/*
	Written 1993-94 by Donald Becker.

	Copyright 1993 United States Government as represented by the
	Director, National Security Agency.

	This software may be used and distributed according to the terms
	of the GNU Public License, incorporated herein by reference.

	The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O
	Center of Excellence in Space Data and Information Sciences
		Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771

	This is a driver for the SMC Ultra ethercard.

*/

static char *version =
	"smc-ultra.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";

#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <asm/io.h>
#include <asm/system.h>

#include <linux/netdevice.h>
#include "8390.h"
extern struct device *init_etherdev(struct device *dev, int sizeof_private,
									unsigned long *mem_startp);

/* A zero-terminated list of I/O addresses to be probed. */
static unsigned int ultra_portlist[] =
{0x200, 0x220, 0x240, 0x280, 0x300, 0x340, 0x380, 0};

int ultra_probe(struct device *dev);
int ultra_probe1(struct device *dev, int ioaddr);

static int ultra_open(struct device *dev);
static void ultra_reset_8390(struct device *dev);
static int ultra_block_input(struct device *dev, int count,
						  char *buf, int ring_offset);
static void ultra_block_output(struct device *dev, int count,
							const unsigned char *buf, const start_page);
static int ultra_close_card(struct device *dev);


#define START_PG		0x00	/* First page of TX buffer */

#define ULTRA_CMDREG	0		/* Offset to ASIC command register. */
#define	 ULTRA_RESET	0x80	/* Board reset, in ULTRA_CMDREG. */
#define	 ULTRA_MEMENB	0x40	/* Enable the shared memory. */
#define ULTRA_NIC_OFFSET  16	/* NIC register offset from the base_addr. */
#define ULTRA_IO_EXTENT 32

/*	Probe for the Ultra.  This looks like a 8013 with the station
	address PROM at I/O ports <base>+8 to <base>+13, with a checksum
	following.
*/
#ifdef HAVE_DEVLIST
struct netdev_entry ultra_drv =
{"ultra", ultra_probe1, NETCARD_IO_EXTENT, netcard_portlist};
#else

int ultra_probe(struct device *dev)
{
	int i;
	int base_addr = dev ? dev->base_addr : 0;

	if (base_addr > 0x1ff)		/* Check a single specified location. */
		return ultra_probe1(dev, base_addr);
	else if (base_addr != 0)	/* Don't probe at all. */
		return ENXIO;

	for (i = 0; ultra_portlist[i]; i++) {
		int ioaddr = ultra_portlist[i];
		if (check_region(ioaddr, ULTRA_IO_EXTENT))
			continue;
		if (ultra_probe1(dev, ioaddr) == 0)
			return 0;
	}

	return ENODEV;
}
#endif

int ultra_probe1(struct device *dev, int ioaddr)
{
	int i;
	int checksum = 0;
	char *model_name;
	unsigned char eeprom_irq = 0;
	/* Values from various config regs. */
	unsigned char num_pages, irqreg, addr, reg4 = inb(ioaddr + 4) & 0x7f;

	/* Check the ID nibble. */
	if ((inb(ioaddr + 7) & 0xF0) != 0x20)
		return ENODEV;

	/* Select the station address register set. */
	outb(reg4, ioaddr + 4);

	for (i = 0; i < 8; i++)
		checksum += inb(ioaddr + 8 + i);
	if ((checksum & 0xff) != 0xFF)
		return ENODEV;

	if (dev == NULL)
		dev = init_etherdev(0, sizeof(struct ei_device), 0);

	printk("%s: SMC Ultra at %#3x,", dev->name, ioaddr);

	for (i = 0; i < 6; i++)
		printk(" %2.2X", dev->dev_addr[i] = inb(ioaddr + 8 + i));

	/* Switch from the station address to the alternate register set and
	   read the useful registers there. */
	outb(0x80 | reg4, ioaddr + 4);

	/* Enabled FINE16 mode to avoid BIOS ROM width mismatches @ reboot. */
	outb(0x80 | inb(ioaddr + 0x0c), ioaddr + 0x0c);
	irqreg = inb(ioaddr + 0xd);
	addr = inb(ioaddr + 0xb);

	/* Switch back to the station address register set so that the MS-DOS driver
	   can find the card after a warm boot. */
	outb(reg4, ioaddr + 4);

	model_name = "SMC Ultra";

	if (dev->irq < 2) {
		unsigned char irqmap[] = {0, 9, 3, 5, 7, 10, 11, 15};
		int irq;

		/* The IRQ bits are split. */
		irq = irqmap[((irqreg & 0x40) >> 4) + ((irqreg & 0x0c) >> 2)];

		if (irq == 0) {
			printk(", failed to detect IRQ line.\n");
			return -EAGAIN;
		}
		dev->irq = irq;
		eeprom_irq = 1;
	}


	/* OK, were are certain this is going to work.  Setup the device. */
	snarf_region(ioaddr, 32);

	/* The 8390 isn't at the base address, so fake the offset */
	dev->base_addr = ioaddr+ULTRA_NIC_OFFSET;

	{
		int addr_tbl[4] = {0x0C0000, 0x0E0000, 0xFC0000, 0xFE0000};
		short num_pages_tbl[4] = {0x20, 0x40, 0x80, 0xff};

		dev->mem_start = ((addr & 0x0f) << 13) + addr_tbl[(addr >> 6) & 3] ;
		num_pages = num_pages_tbl[(addr >> 4) & 3];
	}

	ethdev_init(dev);

	ei_status.name = model_name;
	ei_status.word16 = 1;
	ei_status.tx_start_page = START_PG;
	ei_status.rx_start_page = START_PG + TX_PAGES;
	ei_status.stop_page = num_pages;

	dev->rmem_start = dev->mem_start + TX_PAGES*256;
	dev->mem_end = dev->rmem_end
		= dev->mem_start + (ei_status.stop_page - START_PG)*256;

	printk(",%s IRQ %d memory %#lx-%#lx.\n", eeprom_irq ? "" : "assigned ",
		   dev->irq, dev->mem_start, dev->mem_end-1);
	if (ei_debug > 0)
		printk(version);

	ei_status.reset_8390 = &ultra_reset_8390;
	ei_status.block_input = &ultra_block_input;
	ei_status.block_output = &ultra_block_output;
	dev->open = &ultra_open;
	dev->stop = &ultra_close_card;
	NS8390_init(dev, 0);

	return 0;
}

static int
ultra_open(struct device *dev)
{
	int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */

	if (request_irq(dev->irq, ei_interrupt, 0, "SMC Ultra"))
		return -EAGAIN;

	outb(ULTRA_MEMENB, ioaddr);	/* Enable memory, 16 bit mode. */
	outb(0x80, ioaddr + 5);
	outb(0x01, ioaddr + 6);		/* Enable interrupts and memory. */
	return ei_open(dev);
}

static void
ultra_reset_8390(struct device *dev)
{
	int cmd_port = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC base addr */

	outb(ULTRA_RESET, cmd_port);
	if (ei_debug > 1) printk("resetting Ultra, t=%ld...", jiffies);
	ei_status.txing = 0;

	outb(ULTRA_MEMENB, cmd_port);

	if (ei_debug > 1) printk("reset done\n");
	return;
}

/* Block input and output are easy on shared memory ethercards, the only
   complication is when the ring buffer wraps. */

static int
ultra_block_input(struct device *dev, int count, char *buf, int ring_offset)
{
	void *xfer_start = (void *)(dev->mem_start + ring_offset
								- (START_PG<<8));

	if (xfer_start + count > (void*) dev->rmem_end) {
		/* We must wrap the input move. */
		int semi_count = (void*)dev->rmem_end - xfer_start;
		memcpy(buf, xfer_start, semi_count);
		count -= semi_count;
		memcpy(buf + semi_count, (char *)dev->rmem_start, count);
		return dev->rmem_start + count;
	}
	memcpy(buf, xfer_start, count);

	return ring_offset + count;
}

static void
ultra_block_output(struct device *dev, int count, const unsigned char *buf,
				int start_page)
{
	unsigned char *shmem
		= (unsigned char *)dev->mem_start + ((start_page - START_PG)<<8);

	memcpy(shmem, buf, count);

}

static int
ultra_close_card(struct device *dev)
{
	int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* CMDREG */

	dev->start = 0;
	dev->tbusy = 1;

	if (ei_debug > 1)
		printk("%s: Shutting down ethercard.\n", dev->name);

	outb(0x00, ioaddr + 6);		/* Disable interrupts. */
	free_irq(dev->irq);
	irq2dev_map[dev->irq] = 0;

	NS8390_init(dev, 0);

	/* We should someday disable shared memory and change to 8-bit mode
	   "just in case"... */

	return 0;
}


/*
 * Local variables:
 *  compile-command: "gcc -D__KERNEL__ -Wall -O6 -I/usr/src/linux/net/inet -c smc-ultra.c"
 *  version-control: t
 *  kept-new-versions: 5
 *  c-indent-level: 4
 *  tab-width: 4
 * End:
 */