blob: eefe4389cdd93917c6f968e143a28ad6a02e11bd (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
|
/*
* uninorth.h: definitions for using the "UniNorth" host bridge chip
* from Apple. This chip is used on "Core99" machines
*
*/
/*
* Uni-N config space reg. definitions
*
* (Little endian)
*/
/* Address ranges selection. This one should work with Bandit too */
#define UNI_N_ADDR_SELECT 0x48
#define UNI_N_ADDR_COARSE_MASK 0xffff0000 /* 256Mb regions at *0000000 */
#define UNI_N_ADDR_FINE_MASK 0x0000ffff /* 16Mb regions at f*000000 */
/* AGP registers */
#define UNI_N_CFG_GART_BASE 0x8c
#define UNI_N_CFG_AGP_BASE 0x90
#define UNI_N_CFG_GART_CTRL 0x94
#define UNI_N_CFG_INTERNAL_STATUS 0x98
/* UNI_N_CFG_GART_CTRL bits definitions */
#define UNI_N_CFG_GART_INVAL 0x00000001
#define UNI_N_CFG_GART_ENABLE 0x00000100
#define UNI_N_CFG_GART_2xRESET 0x00010000
/*
* Uni-N memory mapped reg. definitions
*
* Those registers are Big-Endian !!
*
* Their meaning come from either Darwin and/or from experiments I made with
* the bootrom, I'm not sure about their exact meaning yet
*
*/
/* Version of the UniNorth chip */
#define UNI_N_VERSION 0x0000 /* Known versions: 3,7 and 8 */
/* This register is used to enable/disable various parts */
#define UNI_N_CLOCK_CNTL 0x0020
#define UNI_N_CLOCK_CNTL_PCI 0x00000001 /* guess ? */
#define UNI_N_CLOCK_CNTL_GMAC 0x00000002
#define UNI_N_CLOCK_CNTL_FW 0x00000004 /* guess ? */
/* Power Management control ? (from Darwin) */
#define UNI_N_POWER_MGT 0x0030
#define UNI_N_POWER_MGT_NORMAL 0x00
#define UNI_N_POWER_MGT_IDLE2 0x01
#define UNI_N_POWER_MGT_SLEEP 0x02
/* This register is configured by Darwin depending on the UniN
* revision
*/
#define UNI_N_ARB_CTRL 0x0040
#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15
#define UNI_N_ARB_CTRL_QACK_DELAY_MASK 0x0e1f8000
#define UNI_N_ARB_CTRL_QACK_DELAY 0x30
#define UNI_N_ARB_CTRL_QACK_DELAY105 0x00
/* This one _might_ return the CPU number of the CPU reading it;
* the bootROM decides wether to boot or to sleep/spinloop depending
* on this register beeing 0 or not
*/
#define UNI_N_CPU_NUMBER 0x0050
/* This register appear to be read by the bootROM to decide what
* to do on a non-recoverable reset (powerup or wakeup)
*/
#define UNI_N_HWINIT_STATE 0x0070
#define UNI_N_HWINIT_STATE_SLEEPING 0x01
#define UNI_N_HWINIT_STATE_RUNNING 0x02
/* This last bit appear to be used by the bootROM to know the second
* CPU has started and will enter it's sleep loop with IP=0
*/
#define UNI_N_HWINIT_STATE_CPU1_FLAG 0x10000000
|
