1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
|
/* $Id: irq.h,v 1.32 2000/08/26 02:42:28 anton Exp $
* irq.h: IRQ registers on the Sparc.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
*/
#ifndef _SPARC_IRQ_H
#define _SPARC_IRQ_H
#include <linux/config.h>
#include <linux/linkage.h>
#include <linux/threads.h> /* For NR_CPUS */
#include <asm/system.h> /* For SUN4M_NCPUS */
#include <asm/btfixup.h>
#define __irq_ino(irq) irq
#define __irq_pil(irq) irq
BTFIXUPDEF_CALL(char *, __irq_itoa, unsigned int)
#define __irq_itoa(irq) BTFIXUP_CALL(__irq_itoa)(irq)
#define NR_IRQS 15
/* Dave Redman (djhr@tadpole.co.uk)
* changed these to function pointers.. it saves cycles and will allow
* the irq dependencies to be split into different files at a later date
* sun4c_irq.c, sun4m_irq.c etc so we could reduce the kernel size.
* Jakub Jelinek (jj@sunsite.mff.cuni.cz)
* Changed these to btfixup entities... It saves cycles :)
*/
BTFIXUPDEF_CALL(void, disable_irq, unsigned int)
BTFIXUPDEF_CALL(void, enable_irq, unsigned int)
BTFIXUPDEF_CALL(void, disable_pil_irq, unsigned int)
BTFIXUPDEF_CALL(void, enable_pil_irq, unsigned int)
BTFIXUPDEF_CALL(void, clear_clock_irq, void)
BTFIXUPDEF_CALL(void, clear_profile_irq, int)
BTFIXUPDEF_CALL(void, load_profile_irq, int, unsigned int)
#define disable_irq_nosync disable_irq
#define disable_irq(irq) BTFIXUP_CALL(disable_irq)(irq)
#define enable_irq(irq) BTFIXUP_CALL(enable_irq)(irq)
#define disable_pil_irq(irq) BTFIXUP_CALL(disable_pil_irq)(irq)
#define enable_pil_irq(irq) BTFIXUP_CALL(enable_pil_irq)(irq)
#define clear_clock_irq() BTFIXUP_CALL(clear_clock_irq)()
#define clear_profile_irq(cpu) BTFIXUP_CALL(clear_profile_irq)(cpu)
#define load_profile_irq(cpu,limit) BTFIXUP_CALL(load_profile_irq)(cpu,limit)
extern void (*init_timers)(void (*lvl10_irq)(int, void *, struct pt_regs *));
extern void claim_ticker14(void (*irq_handler)(int, void *, struct pt_regs *),
int irq,
unsigned int timeout);
#ifdef CONFIG_SMP
BTFIXUPDEF_CALL(void, set_cpu_int, int, int)
BTFIXUPDEF_CALL(void, clear_cpu_int, int, int)
BTFIXUPDEF_CALL(void, set_irq_udt, int)
#define set_cpu_int(cpu,level) BTFIXUP_CALL(set_cpu_int)(cpu,level)
#define clear_cpu_int(cpu,level) BTFIXUP_CALL(clear_cpu_int)(cpu,level)
#define set_irq_udt(cpu) BTFIXUP_CALL(set_irq_udt)(cpu)
#endif
extern int request_fast_irq(unsigned int irq, void (*handler)(int, void *, struct pt_regs *), unsigned long flags, __const__ char *devname);
/* On the sun4m, just like the timers, we have both per-cpu and master
* interrupt registers.
*/
/* These registers are used for sending/receiving irqs from/to
* different cpu's.
*/
struct sun4m_intreg_percpu {
unsigned int tbt; /* Interrupts still pending for this cpu. */
/* These next two registers are WRITE-ONLY and are only
* "on bit" sensitive, "off bits" written have NO affect.
*/
unsigned int clear; /* Clear this cpus irqs here. */
unsigned int set; /* Set this cpus irqs here. */
unsigned char space[PAGE_SIZE - 12];
};
/*
* djhr
* Actually the clear and set fields in this struct are misleading..
* according to the SLAVIO manual (and the same applies for the SEC)
* the clear field clears bits in the mask which will ENABLE that IRQ
* the set field sets bits in the mask to DISABLE the IRQ.
*
* Also the undirected_xx address in the SLAVIO is defined as
* RESERVED and write only..
*
* DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor
* sun4m machines, for MP the layout makes more sense.
*/
struct sun4m_intregs {
struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS];
unsigned int tbt; /* IRQ's that are still pending. */
unsigned int irqs; /* Master IRQ bits. */
/* Again, like the above, two these registers are WRITE-ONLY. */
unsigned int clear; /* Clear master IRQ's by setting bits here. */
unsigned int set; /* Set master IRQ's by setting bits here. */
/* This register is both READ and WRITE. */
unsigned int undirected_target; /* Which cpu gets undirected irqs. */
};
extern struct sun4m_intregs *sun4m_interrupts;
/*
* Bit field defines for the interrupt registers on various
* Sparc machines.
*/
/* The sun4c interrupt register. */
#define SUN4C_INT_ENABLE 0x01 /* Allow interrupts. */
#define SUN4C_INT_E14 0x80 /* Enable level 14 IRQ. */
#define SUN4C_INT_E10 0x20 /* Enable level 10 IRQ. */
#define SUN4C_INT_E8 0x10 /* Enable level 8 IRQ. */
#define SUN4C_INT_E6 0x08 /* Enable level 6 IRQ. */
#define SUN4C_INT_E4 0x04 /* Enable level 4 IRQ. */
#define SUN4C_INT_E1 0x02 /* Enable level 1 IRQ. */
/* Dave Redman (djhr@tadpole.co.uk)
* The sun4m interrupt registers.
*/
#define SUN4M_INT_ENABLE 0x80000000
#define SUN4M_INT_E14 0x00000080
#define SUN4M_INT_E10 0x00080000
#define SUN4M_HARD_INT(x) (0x000000001 << (x))
#define SUN4M_SOFT_INT(x) (0x000010000 << (x))
#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */
#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */
#define SUN4M_INT_M2S_WRITE 0x20000000 /* write buffer error */
#define SUN4M_INT_ECC 0x10000000 /* ecc memory error */
#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */
#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */
#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */
#define SUN4M_INT_REALTIME 0x00080000 /* system timer */
#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */
#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */
#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */
#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */
#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */
#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */
#define SUN4M_INT_SBUS(x) (1 << (x+7))
#define SUN4M_INT_VME(x) (1 << (x))
#endif
|
